Welcome the the Camilleri Injection System Information Page
The Camilleri Underslab Injection System has been developed and uses a Quality Management System.
One part of this system is the development of an "Accreditation Course" for installers and maintainers of the system. All Camilleri Underslab Injection System licensees must attend the accreditation course and demonstrate competency in installing the system. Accreditation will then be provided to facilitate purchase of the product components.
To become accredited each licensee must comply with the following:
1. Attend a Camilleri Accreditation Course and demonstrate competency.
2. Only allow Pest Management Technicians to install and maintain the system.
3. Ensure that installations of the Camilleri Underslab Injection system under their licence are completed according to the Installer's Manual.
4. Use brochures and DVD provided by CUSIS for consumer information.
5. Purchase Camilleri Reticulation System parts and accessories from a recognized quality distributor. Garrards P/L is the exclusive distributor for the Camilleri Underslab Injection System.
This course will cover both Total Underslab and Perimeter Installations.
For all course inquiries contact Phil Sayer at Garrards Head Office or This email address is being protected from spambots. You need JavaScript enabled to view it. to send an E-mail to Phil.
Click on the following links to download.
Licence Form Licencee Rules Specifications Installation
Click on an image to view a larger one.
 |
There are two types of PIPE. Both are flexible and easy to cut and join. DISTRIBUTION PIPE:- 13m MDPE pipe with holes strategically located in it. FEEDER PIPE:- 13mm low density poly pipe with NO holes in it. |
|
 |
Joiners are used to join the DISTRIBUTION PIPE to the FEEDER PIPE. | |
 |
ELBOWS are used for making an upright or for turning through 90o | |
 |
T-PIECES are used for joining two pieces of pipe or for making a circle as shown. | |
 |
END PLUGS are used to end runs of DISTRIBUTION PIPE. | |
 |
BAYONET CONNECTORS join the FEEDER PIPE to the pump-up connector. | |
 |
BAYONET CAPS are placed on the box to keep soil, insects and debris out of the pipe between pump-ups. | |
 |
PUMP-UP CONNECTORS include a one way valve and are clicked onto the BAYONET CONNECTOR at pump-up. | |
 |
RATCHET CLIPS tighten up all the connections on tthe low density FEEDER PIPE so the junctions cannot blow apart when the system is pumped up or recharged. | |
 |
STEEL PEGS are used to hold the pipes in place | |
 |
There are small and large VALVE BOXES. These contain and protect the BAYONET CONNECTORS or PUMP-UP CONNECTOR between pump-ups. | |
 |
There are small and large VALVE BOXES. These contain and protect the BAYONET CONNECTORS or PUMP-UP CONNECTOR between pump-ups. |
 |
 |
 |
 |
 |
 |