Suspension Concentrate

COUNTRY BIFENTHRIN AQUA 100 SC 10LT

Active ingredient100 g/L bifenthrin

Code COU/A100/10

Downloads

Product details

Formulation

Suspension concentrate (SC) mixed with water to make the spray.

Group 3A insecticide (synthetic pyrethroid).

Overview

COUNTRY Bifenthrin 100 SC Insecticide is a 100 g/L bifenthrin suspension concentrate for Pest Management Professionals. One concentrate covers subterranean termite protection, general pest control inside and outside buildings, and pests in turf and ornamental plants.

For termites, it forms continuous horizontal and vertical chemical soil barriers that stop termites getting into a building unseen. It can be used for pre-construction and post-construction barriers, perimeter barriers, certified reticulation systems, protecting poles and fence posts, and destroying nests. All barrier work must follow the Australian Standard AS 3660 Series.

For general pests, it kills on contact with the spray. It also keeps working as insects later touch treated surfaces. It is registered to form Residual Surface Treatments that control mosquitoes, biting midges and flies where they rest or shelter. The label carries APVMA Approval No. 67299/107102.

Product Highlights

  • One product for termites, general pests and turf: it covers termite barriers, spiders, ants, cockroaches, papernest wasps, fleas, ticks, flies, mosquitoes and biting midges, plus pests in turf and ornamental plants. This means fewer separate products to stock in the vehicle.
  • Clear termite protection periods by region: the label gives expected protection periods for each situation, separately for areas south and north of the Tropic of Capricorn. The longest is at least 10 years in southern areas (Tasmania excluded) when the highest label rate is used. This helps when writing the durable notice and advising clients on retreatment.
  • Approved for certified reticulation systems: it can be pumped through certified systems for perimeter and service penetration barriers, and for cavity infill and footing barriers. Barriers can then be topped up without trenching or drilling again.

Target pests

  • Subterranean termites (Tasmania excluded)
  • Spiders
  • Ants (not Red Imported Fire Ants)
  • Cockroaches
  • Papernest wasps
  • Mosquitoes
  • Biting midges
  • Flies
  • Fleas
  • Ticks (adults and nymphs)
  • Turf: Lawn Armyworm, Sod Webworm, Argentine Stem Weevil adults, African Black Beetle adults, Billbug adults
  • Turf ants: Black Ant, Coastal Brown Ant, Funnel Ant, Meat Ant, Sugar Ant and Stinging Ant
  • Ornamentals: Two Spotted Mite, aphids, caterpillars and loopers (including Heliothis/Helicoverpa spp., Light Brown Apple Moth, Geranium Plume Moth), whitefly (including Bemisia tabaci Biotype B), Mealy Bug, Plague Thrips, Cutworm (Agrotis spp.)

Where to use

  • Inside and outside, and the surrounds of, domestic, commercial, public and industrial buildings and structures (general pests in all states)
  • Domestic, public, commercial and industrial areas for subterranean termite control (all states except Tasmania)
  • Under slabs, under suspended floors, around building perimeters and service penetrations, and in cavity infill and footing barriers through certified reticulation systems
  • Service poles and fence posts
  • Termite nests in trees, poles, posts and stumps
  • Turf: lawns, commercial turf farms, parks, recreational areas, bowling greens and sports fields
  • Roses, carnations and other ornamental plants, including beds, containers and pots

Application

Add the product to water in the spray tank and mix thoroughly. Keep the tank agitated while mixing and spraying. Check the label for rates and spray volumes for each situation.

  • General pests: use a coarse, low-pressure spray on the surfaces where pests hide, rest or shelter. Use a solid-stream nozzle for cracks and crevices. For spiders, the label recommends a two-part treatment: cracks and crevices first, then a band spray over surfaces.
  • Perimeter treatment: spray a band of soil or vegetation 2–3 m wide around the structure, and the foundation up to about 1 m high.
  • Wall cavities: foaming agents help the spray reach concealed areas.
  • Termite barriers: build them to AS 3660 using trenching and backfill treatment, soil rodding, open-wand application, sub-slab injection through drilled holes, or a certified reticulation system.
  • Slab injection: injectors must not leak and must have a tip shut-off. Lateral dispersion tips are recommended. Reseal drill holes after injecting.
  • Termite add-ins: a marker dye helps show even coverage. A soil surfactant, wetting agent or foaming agent can help on hard-to-wet soils or where access is difficult.
  • Turf: use spray equipment to apply evenly after mowing. Lightly irrigate soon after application.
  • Do not use as a space spray, an Ultra Low Volume (ULV) treatment or a thermal fog.
  • Do not use in cavity walls, except through certified cavity infill reticulation systems or when treating a nest directly.
  • Do not apply to soils that are too wet or straight after heavy rain.

Safety — POISON

Poisons Schedule 6 (S6). Keep out of reach of children. Read the safety directions before opening or using.

  • Opening the container and preparing the spray: cotton overalls buttoned to the neck and wrist, a washable hat, and elbow-length PVC or nitrile gloves
  • Using the spray with hand-held equipment: protective waterproof clothing, elbow-length PVC or nitrile gloves and water-resistant footwear
  • Termite work in buildings and structures: cotton overalls buttoned to the neck and wrist, a washable hat, and elbow-length PVC or nitrile gloves
  • Respiratory protection, as listed in the GHS precautionary statements
  • Hazards: poisonous if swallowed; harmful if inhaled; may irritate eyes, skin and the respiratory tract; repeated exposure may cause allergic disorders
  • Re-entry after general pest and post-construction treatments: let surfaces dry completely (normally 3–4 hours) and ventilate the building before people return
  • Dangerous to bees, fish and aquatic organisms. Do not spray plants in flower while bees are foraging. Cover or remove fish ponds and aquariums.
  • First aid: Poisons Information Centre 13 11 26

FAQ

  • Can I use it in a termite reticulation system? Yes, if the system is certified and can distribute the emulsion as the label and AS 3660 require. It is approved for perimeter and service penetration systems, and for cavity infill and footing systems. For perimeter-only reticulation, the label also recommends a full pre-construction horizontal barrier under the slab.
  • Can I use it for termites in Tasmania or in the tropics? It is not registered for termite use in Tasmania; the general pest uses apply in all states. North of the Tropic of Capricorn, the label's expected protection periods are shorter than in the south. Some pre-construction rates in the north must be used with a certified reticulation system. Real-world protection depends on termite pressure, climate, soil and the rate used, and the label requires at least an annual inspection.
  • What can't it be used for? It is not registered for Red Imported Fire Ants. It must not be used as a space spray, Ultra Low Volume (ULV) treatment or thermal fog. Do not apply it to mud, sand, mangroves or aquatic habitats. As a Group 3A insecticide, repeated use can select for resistant insects, so rotate it with insecticides from other groups.

Pack Size

  • 10 L
  • How to order: Garrards product code COU/A100/10