Product details
Formulation
- Formulation type: suspension concentrate (SC), water-based, mixed with water before use
- Insecticide group: Group 4A
- Poisons schedule: Schedule 5 (SUSMP)
- Signal heading: CAUTION
Overview
Premise 200 SC Termiticide is a liquid termiticide for Pest Management Professionals. It is used to manage subterranean termites and drywood termites. It is registered with the APVMA (registration no. 49098).
It is mainly used to build a complete, continuous chemical treated zone in the soil around and under a structure, in line with AS 3660. The treated zone stops termites from getting into buildings unseen. Premise is a non-repellent treatment. Termites don't avoid the treated soil, so they forage into it and are killed by contact. They also pass the active ingredient through the colony as they interact.
One product covers several jobs: soil treatment around existing buildings, treatment through reticulation systems, protecting posts and poles, injecting nests directly, and dry-foam treatment of termite workings. This lets a Pest Management Professional handle most of a termite program with a single concentrate.
Product Highlights
- Non-repellent treated zone: termites don't detect the zone or forage around it. Even where termites crossed the zone in extreme trial conditions, activity later stopped, showing a delayed kill effect.
- Documented service period: a correctly applied treated zone can stop hidden entry by subterranean termites (except Mastotermes) for five years south of the Tropic of Capricorn. Elsewhere the minimum is two years, and one year for Mastotermes darwiniensis in all areas. Actual results depend on termite pressure, climate, soil and later soil disturbance.
- Several ways to apply it: conventional soil spraying, trenching and backfilling, soil rodding, drilling and injecting through concrete, certified reticulation systems, direct nest injection and dry-foam application. At label dilution it mixes to a clear solution with only a faint odour.
Target pests
- Subterranean termites, including Coptotermes spp. and Schedorhinotermes spp.
- Giant northern termite (Mastotermes darwiniensis): needs a higher label rate
- Drywood termites: dry-foam treatment of termite workings only
Where to use
The Directions for Use apply in all states except Tasmania.
- Existing buildings: domestic, industrial, government and commercial premises
- New buildings: external protective treatments only (conditions apply in Queensland)
- Service poles and fence posts, both new and existing
- Termite nests in trees, stumps, posts, power or utility poles, mounds and wall cavities
- Active termite workings where the nest can't be found, e.g. timber in service, infested wall cavities and external infested timber (dry-foam application)
- Reticulation systems: perimeter and/or service-penetration treatments, and complete under-slab installations
Application
Premise is diluted in water and applied to make a complete, continuous treated zone as set out in AS 3660.2. Rates, volumes and drill-hole spacings are on the label. Read the full booklet before use.
- Mixing: clean any residue of other products out of the spray equipment first. Shake the container hard, premix the product with water in a clean bucket, add it to a half-filled tank, top up and recirculate.
- Vertical treated zones: trench and treat the soil as it is backfilled. This is the preferred method. Trenching combined with soil rodding is the alternative. Use rodding on its own only where trenching isn't possible.
- Through concrete: drill and inject paths, driveways and slabs. Use a slab injector with a multi-directional tip, then reseal or plug the drill holes.
- Horizontal treated zones: treat all sub-floor soil where access is limited or clearance is under 400 mm, and avoid spray shadows behind piers.
- Reticulation: use only systems certified to AS 3660 and installed in a prepared sand/soil bed. Under-slab treatment of new slabs must start after 28 days and no later than 60 days after the slab is poured.
- Dry foam: use a foaming agent that gives an expansion ratio of 20:1 or more. A non-repellent foaming agent is recommended. Drill and inject progressively into infested timber, voids or nests.
- Hard-to-treat soils: wetting or foaming agents can help with non-wetting soils, areas with poor access or soil subsidence.
- Don't apply to very wet soil or straight after heavy rain. Don't disturb the treated zone after treatment.
- Follow-up: re-inspect within 3 months of treatment, then inspect at least once a year.
Safety
CAUTION – Keep out of reach of children. Schedule 5 poison. Harmful if swallowed. May irritate the eyes and skin. Repeated occupational exposure may cause allergic disorders.
- PPE: cotton overalls buttoned to the neck and wrist, a washable hat and elbow-length PVC gloves
- If clothing becomes contaminated or wet with spray, take it off straight away. Wash any affected skin with soap and water.
- Wash hands after use. Wash gloves and contaminated clothing after each day's use.
- Before treating wall cavities, find any electrical wiring. Don't apply near live electrical wires.
- Don't contaminate ponds, waterways or drains with the product or used containers.
- First aid: Poisons Information Centre 13 11 26
FAQ
- Can Premise be the only treatment for an active structural infestation? Dry-foam application must not be the only control for active subterranean termite infestations in a structure. It supplements a Premise soil treatment, a termite bait system or another product registered as a sole source. Colonies with no ground contact, such as those living off a leaking roof or faulty plumbing, may not be affected by a soil treatment alone. These need direct nest treatment, a colony eradicant dust or baiting.
- Does it suit every soil type? Soil affects the result. In heavy clay, rodding can spread the chemical unevenly, so trenching and backfilling is preferred. Very dry, sandy or porous soils may need moistening first to stop the solution running through. Non-wetting soils can be helped with a wetting or foaming agent. If soil has to be replaced, use a loam type. Avoid sands or decomposed granite, which have very low organic matter.
- Can it be used on new builds or in wall cavities? On new buildings it can be used for external protective treatments only. A horizontal treated zone can't go in before the slab is poured unless it is applied through a certified reticulation system, and conditions apply in Queensland. Use it in cavity walls only for direct nest treatment or as a dry foam on termite activity. Liquid behind plasterboard can cause water or mud stains, and dry foam reduces that risk. The Directions for Use don't cover Tasmania.
Pack Size
- Pack size: 3 L
- Approximate dimensions (packed): 18 × 13 × 25 cm; approx. 3.5 kg
- How to order: Garrards product code PREM/3





