Growth Regulators

D-FENSE NXT INSECTICIDE 425G

Active ingredientNovaluron 2 g/kg + Deltamethrin 0.6 g/kg + Pyriproxyfen 0.2 g/kg

Code DEFEN/NXT

Downloads

Product details

Formulation

  • Formulation type: pressurised solution (aerosol). The solvent is a hydrocarbon liquid (752 g/kg) and the propellant is carbon dioxide.
  • Insecticide mode of action groups: 15, 7C and 3A
  • Group 15 (novaluron): chitin synthesis inhibitor, a type of insect growth regulator (IGR)
  • Group 7C (pyriproxyfen): juvenile hormone analogue (IGR)
  • Group 3A (deltamethrin): synthetic pyrethroid that acts as a sodium channel modulator
  • APVMA Approval No. 91902/133912

Overview

D-Fense NXT Insecticide is a 425 g ready-to-use aerosol from ADAMA. It is registered by the APVMA and gives contact kill and residual control of bed bugs, cockroaches, ants, fleas, ticks, spiders and other listed pests in and around buildings and transport vehicles.

It combines three modes of action: a synthetic pyrethroid and two different insect growth regulators (IGRs). Deltamethrin attacks the nervous system for fast knockdown. Novaluron stops bed bugs and other insects from hatching and impairs their mobility, so they cannot reach food. Pyriproxyfen stops insects maturing past the juvenile stage.

For Pest Management Professionals, this means one can treats both the adults you can see and the next generation in cracks, crevices, voids and bed frames. That helps break the cockroach and bed bug life cycle and reduces the need for repeat callbacks.

Product Highlights

  • Two IGRs and an adulticide in one can: Most aerosols contain only an adulticide. Pairing a chitin synthesis inhibitor (Group 15) with a juvenile hormone analogue (Group 7C) attacks two separate stages of development, alongside deltamethrin for knockdown. This matters most for bed bugs and cockroaches, where eggs and nymphs survive adulticide-only treatments.
  • Registered for mattresses, furniture and carpets: The label allows treatment of mattress tufts, folds and edges, box springs, bed frames, picture frames, skirting boards and mouldings. These are the places bed bugs hide.
  • Spray and injection in one product: The actuator and injection tubes deliver product directly into cracks, crevices, holes and wall voids. The standard spray handles spot and general surface treatments, so you don't need to mix or calibrate equipment for small or sensitive jobs.

Target pests

  • Ants
  • Bees
  • Bed bugs
  • Cockroaches
  • Fleas
  • Flies
  • Mosquitoes
  • Spiders
  • Termites (only as a supplement for active infestations; not a standalone termite treatment)
  • Ticks
  • Wasps

Where to use

The product is approved for use in and around domestic, commercial, industrial and public buildings and transport vehicles, and in the external areas associated with these sites.

  • Food processing establishments and shops (follow the label precautions for covering food)
  • Factories, offices, storerooms and barracks
  • Schools and hospitals
  • Private houses, including mattresses, box springs, furniture and carpets
  • Ships and other transport vehicles
  • Outdoors: building foundations, external walls, window and door frames, eaves, porches, patios and outdoor furniture
  • Use for flying and stinging insects only on outdoor surfaces and resting places
  • Do not apply to carpets where children regularly play

Application

Hold the can upright and point the spray away from your face. Keep the can 30–40 cm from the surface and spray surfaces thoroughly. Do not use it as a space spray. Application rates, timing and reapplication intervals are on the label.

  • Crack and crevice: Fit the actuator and injection tube. Place the tip into cracks, crevices, holes and void spaces where insects harbour or breed. Long voids may need several injection points.
  • Spot treatment: Treat storage areas, cupboards, areas around water pipes, doors and windows, behind and under refrigerators, stoves, sinks and cabinets, and shelves and drawers.
  • General surface spray: Apply a light spray to infested surfaces.
  • Bed bugs: Remove linen and wash it before reuse. Take the bed apart and treat its joints, cracks and internal framework. Treat mattress and box spring tufts, folds and edges. Also treat picture frames, skirting boards, mouldings and cracks in the room. Let everything dry before remaking the bed.
  • Fleas and ticks: Remove and clean bedding. Treat floors, cracks and crevices, and surfaces where females may lay eggs. Do not spray pets directly.
  • Outdoors: Spray building foundations up to 1 metre high. Also treat ant trails and the areas around doors and windows.

Safety

Signal heading: CAUTION. KEEP OUT OF REACH OF CHILDREN. READ SAFETY DIRECTIONS BEFORE OPENING OR USING.

  • Safety directions: The product may irritate the skin. Avoid skin contact and wash your hands after use. The label lists no specific items of PPE.
  • Before use: Remove or cover exposed food, dishes, utensils and food preparation surfaces. Remove pets. Cover or remove fish ponds, aquariums and open water containers.
  • After use: Ventilate treated areas thoroughly. Clean up thoroughly before food processing or serving starts again.
  • Re-entry: Adults must not enter treated areas for 40 minutes after application. Children must not enter for 2 hours.
  • Flammable and under pressure: Turn off electrical appliances and put out pilot lights before treating. Do not spray near flame. Do not puncture or burn the can, even when empty.
  • Very toxic to aquatic life: Do not contaminate wetlands or watercourses with the product or used containers.
  • Storage: Keep in the closed original container in a cool, dry, well-ventilated place out of direct sunlight.
  • First aid: Contact a doctor or the Poisons Information Centre (131 126). If swallowed, do NOT induce vomiting.

FAQ

  • Will it work on pyrethroid-resistant bed bugs or cockroaches? D-Fense NXT contains actives from three insecticide groups: 3A, 15 and 7C. The two IGRs work separately from the pyrethroid by targeting hatching, moulting and maturation, so they also affect the next generation. Resistant insects can still exist, and the label warns that repeated use of the same groups can let them dominate. Rotate groups as part of your resistance management.
  • Can I use it as a termite treatment? Not on its own. The label states it is not suitable as a standalone termite control product in and around buildings. Use it only as a supplement for treating active infestations of wood-destroying insects as part of a full termite management program.
  • Is it suitable for homes with children and pets? Yes, if you follow the label. It is registered for mattresses, furniture and carpets, but must not be applied to carpets where children regularly play. Children must stay out of treated areas for 2 hours, and adults for 40 minutes. Remove pets before spraying, never spray animals directly, and cover or remove aquariums and fish ponds.

Pack Size

How to order: D-Fense NXT Insecticide 425 g aerosol, Garrards product code DEFEN/NXT.

  • 425 g aerosol can