Product details
Formulation
Suspension concentrate (SC), diluted in water before use. The concentrate is a viscous white suspension.
Insecticide Group 3A (pyrethroid).
Overview
COUNTRY Bifenthrin 100 SC is a bifenthrin termiticide and insecticide for Pest Management Professionals. It covers two jobs in one concentrate: subterranean termite barriers and general pest control in and around domestic, commercial, public and industrial buildings.
For general pests, it kills on contact and leaves a residue that keeps working when insects land on treated surfaces. That residual surface treatment covers mosquitoes, biting midges, flies, fleas, ticks, spiders, ants, cockroaches and papernest wasps.
For termites, it forms horizontal and vertical chemical soil barriers in line with the Australian Standard AS 3660 Series. Uses include pre-construction and post-construction barriers, perimeter barriers, certified reticulation systems, poles and fence posts, and direct nest eradication. It is registered with the APVMA (product number 67299) as a Restricted Chemical Product, so it can only be supplied to or used by an authorised person.
Product Highlights
- One product for termites and general pests: the same concentrate covers termite barriers, nest eradication and indoor and outdoor pest treatments, so you can carry fewer products in the vehicle.
- Long termite protection periods: south of the Tropic of Capricorn (except Tasmania), the highest label rate gives an expected protection period of at least 10 years for pre-construction, perimeter, post-construction and reticulated perimeter barriers. North of the Tropic, the expected period is up to 5 years. The label lists the rate for each period and states that actual protection depends on termite hazard, climate, soil conditions and the rate used.
- Water-based SC formulation: the safety data sheet lists only bifenthrin plus water and other non-hazardous ingredients. It mixes with water in the spray tank and suits interior general pest work as well as soil barriers.
Target pests
- Subterranean termites
- Spiders
- Papernest wasps
- Ants (excluding Red Imported Fire Ants)
- Cockroaches
- Mosquitoes
- Biting midges
- Flies
- Fleas
- Ticks (adults and nymphs)
Where to use
General pest control and residual surface treatments are approved in all states. Subterranean termite uses are approved in all states except Tasmania.
- Inside and outside, and around, domestic, commercial, public and industrial buildings and structures
- Residual surface treatment sites: indoors, this includes walls, fly screens, the areas behind and under sinks, and under furniture and indoor plants. Outdoors, it includes building exteriors, eaves, fences, garages, sheds, gazebos, ornamental plants, hedges, and shady or damp areas around buildings
- Perimeter bands of soil or vegetation next to the structure, plus the foundation
- Pre-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
- Perimeter barriers for new and existing buildings
- Post-construction barriers under and around existing buildings, including sub-slab injection
- Certified reticulation systems for perimeter and service penetration barriers, and for cavity infill and footing barriers
- Service poles and fence posts
- Eradication of termite nests in trees, poles, posts and stumps
- Not approved for: space spraying, ULV or thermal fogging, cavity walls (except through certified cavity infill reticulation systems or direct nest treatment), mud, sand, mangrove or aquatic habitats, excessively wet soils or soils just after heavy rain, or sites where predatory mites are established and providing effective mite control
Application
Add the product to water in the spray tank, mix thoroughly, and keep the mix agitated during mixing and application. Use the label rates. Rates and spray volumes vary by pest, situation, surface type and whether the site is north or south of the Tropic of Capricorn.
- General pests: apply as a coarse, low-pressure spray to surfaces where pests hide, rest or harbour. Do not spray past the point of run-off
- Cracks and crevices: use a solid stream nozzle. For spiders, the label recommends a two-part treatment: crack and crevice first, then an overall band spray
- Vegetation: make sure the spray gets right through the plant or hedge and covers both sides of the leaves
- Wall cavities and other hidden spaces: foaming agents can improve penetration
- Termite barriers: apply according to the AS 3660 Series. Methods include open wand application, trenching and treating the backfill, soil rodding, sub-slab injection through drilled holes, and certified reticulation systems
- Soil application: use low-pressure, high-volume equipment that delivers large, coarse droplets to reduce drift. The label recommends a marker dye, and a soil surfactant, wetting agent or foaming agent can help on hard-to-wet soils
- Indoor slab injection: equipment must be in good working order and leak-free, with a tip shut-off on the injector. Lateral dispersion tips are recommended, and drill holes must be resealed after injection
- After termite work: the durable notice required by the Building Code of Australia (BCA) must state that the barrier has a finite life and that annual inspections are recommended. The label refers to AS 4349.3 for inspections
Safety
Signal heading: POISON, which corresponds to Schedule 6 of the Poisons Standard (SUSMP). It is a Restricted Chemical Product, so only an authorised person may buy or use it, and the operator must be licensed under state legislation. Keep out of reach of children.
- Hazards: poisonous if swallowed, may irritate eyes and skin, and repeated exposure may cause allergic disorders
- Termite control in buildings and structures: wear cotton overalls buttoned to the neck and wrist, a washable hat, and elbow-length PVC or nitrile gloves
- Hand-held application: wear the same items when opening the container and preparing the spray. When spraying, wear protective waterproof clothing, elbow-length PVC or nitrile gloves, and water-resistant footwear
- Re-entry: let treated areas dry completely (normally 3–4 hours) and ventilate buildings before people return. Keep people out of uncovered treated soil until the spray has dried
- Do not spray directly on people, pets or animals. Remove pets, cover fish ponds and aquariums, and avoid contact with food and food preparation surfaces
- Dangerous to fish, aquatic organisms and bees. Do not contaminate waterways or drains, and do not spray flowering plants while bees are foraging
- First aid: Poisons Information Centre, 13 11 26
FAQ
- Can I use it for termite work anywhere in Australia? General pest and residual surface uses are approved in all states, but termite uses are not approved in Tasmania. North of the Tropic of Capricorn, the label requires higher rates for the same protection period and gives shorter expected periods than in the south. Some of the lower pre-construction rates in the north can only be used with a certified reticulation system.
- Is it compatible with reticulation systems and physical barriers? Yes, if the system is certified and can distribute the emulsion as the label and AS 3660 require. It can be used for perimeter and service penetration barriers, and for cavity infill and footing barriers. Where reticulation covers only the perimeter or service penetrations, the label also recommends a full pre-construction soil barrier. When combined with a physical barrier, install each certified system to its own specification and AS 3660.
- Can I use it for mosquito fogging, and will it control every population? No to fogging: the label prohibits space spraying, ULV and thermal fogging. Mosquitoes, midges and flies are controlled by residual treatment of the surfaces where they rest. Red Imported Fire Ants are excluded. As a Group 3A insecticide, it may work less well on resistant insects, so rotate it with products from other insecticide groups as part of resistance management.
Pack Size
5 L
- How to order: Garrards product code COU/A100/5
- Restricted Chemical Product: supplied only to authorised persons





