Product details
Formulation
- Formulation type: fumigation tablet (3 g). The tablets release phosphine gas when they react with moisture in the air.
- Mode of action group: Group 24A insecticide
- Poisons schedule: Schedule 7 (signal heading DANGEROUS POISON)
- Flammable: keep away from naked flame
Overview
QuickPhos Fumigation Tablets are an aluminium phosphide fumigant from UPL Australia (APVMA approval no. 46948/106465). They control insect pests of stored products in well-sealed structures. They are also registered for fumigating rabbit burrows.
The tablets react with moisture in the air and slowly give off phosphine gas. The gas moves through the stored commodity and kills eggs, larvae, pupae and adult storage pests. This includes pests developing inside grain kernels, which surface sprays cannot reach. Pest Management Professionals use it to clean up infestations in grain, milled products, dried foods, seed, stockfeed and tobacco, and to disinfest empty storages before they are filled.
Results depend on how well the structure is sealed. All life stages are controlled only in a well-sealed enclosure. In a leaky structure some eggs, pupae and adults survive, and the label makes clear that a higher dose will not make up for gas loss.
Product Highlights
- Kills every life stage: in well-sealed enclosures, phosphine moves through the commodity and kills eggs, larvae, pupae and adults. This matters because hidden stages inside kernels are what cause infestations to come back after surface treatments.
- Short withholding period: treated produce can be used for human consumption or stockfeed 2 days after the full fumigation period (exposure plus ventilation). For tobacco, no withholding period is required when used as directed. Treated commodities can be shipped once the minimum exposure and ventilation periods are complete.
- Two registered uses in one product: covers storage pests in commodities, empty warehouses and enclosures, and rabbit burrow fumigation in NSW, VIC, QLD, SA, WA and the ACT. Dosing is simple because each 3 g tablet releases a known 1 g of phosphine.
Target pests
- Lesser grain borer
- Cadelle
- Cigarette beetle
- Confused flour beetle
- Dried fruit beetle
- Flat grain beetle
- Merchant grain beetle
- Red-legged ham beetle
- Rust-red flour beetle
- Sawtoothed grain beetle
- Skin and hide beetle
- Spider beetles
- Warehouse beetle
- Angoumois grain moth
- Indian meal moth
- Mediterranean flour moth
- Mottled grain moth
- Raisin moth
- Tobacco moth
- Tropical warehouse moth
- Psocids
- Stored products mites
- Bean weevil, coffee bean weevil, granary weevil, maize weevil, pea weevil and rice weevil
- Rabbits (burrow fumigation in NSW, VIC, QLD, SA, WA and ACT only)
- Treatment doses also kill any cockroaches, rats and mice in the enclosure
Where to use
Approved for use only in well-sealed structures. This means porous surfaces, seams and cracks are permanently sealed, and intakes, outlets, doors, fan housings, windows and hatches are temporarily sealed.
- Well-sealed fumigation enclosures and chambers, grain storage sheds, silos and other structures suitable for fumigation
- Commodities under gas-proof sheeting sealed gas-tight
- Raw cereal grains: barley, maize, millets, oats, rice, rye, sorghum, triticale and wheat
- Other food commodities: flour and other milled cereal products, breakfast cereals, dried fruits, dried vegetables, dried pulses, other dried foods, peanuts, oilseeds, and cocoa and coffee beans
- Seeds for propagation and bulk stockfeeds
- Tobacco in bales, cases and hogsheads in well-sealed fumigation enclosures
- Well-sealed empty warehouses, elevators, stores, structures and enclosures
- Rabbit burrows in NSW, VIC, QLD, SA, WA and the ACT only
- Do not use in inhabited buildings, or in work situations where gas could leak into working areas
- Do not use in road transport vehicles (trucks or road-hauled containers), or in commodities, containers, railcars or vessels that are or may be in transit during exposure or ventilation
- Do not use when commodity temperature is below 15°C, when relative humidity in the structure is below 25%, or in raw cereal grain with moisture content below 9%
- Do not use surface-only treatment in structures taller than twice their width unless a gas recirculation device is fitted
- Phosphine corrodes copper and copper alloys. Seal or otherwise protect electrical and electronic equipment (computers, meters, switches, fire alarm systems), photographic film and copy paper
Application
Doses are based on the internal volume of the structure, whether it is full, part-filled or empty. Check the label for rates, minimum exposure periods (which vary with commodity temperature) and ventilation periods. Exposure periods cannot be shortened.
- Silos and bulk storages: place tablets in a single layer on non-flammable trays or sheets spread evenly on the commodity surface. Do not let tablets touch the commodity.
- Under gas-proof sheeting: space tablets on non-flammable trays or sheets between or alongside stacked commodities so gas can circulate, then seal the sheeting gas-tight.
- Empty storages and enclosures: space tablets on non-flammable trays or sheets, starting at the point furthest from the exit. Then make the enclosure gas-tight and lock and seal the door.
- Rabbit burrows: cut back around the hole and place tablets well down the tunnel, then plug firmly with soil and level the surface. Wrapping tablets in moistened paper improves results, and 'dogging' the area first helps make sure the rabbits are in their warrens.
- Never heap tablets or add water to them.
- Equipment: non-flammable trays or sheets, gas-proof sheeting and sealing materials, 'DANGER – POISON GAS – KEEP AWAY' signs at every approach, phosphine detection tubes or meters, and a flash-proof fan if using forced-draught ventilation.
- Ventilation is complete only when phosphine readings in the enclosure and work area are below 0.3 ppm.
- After fumigation, remove spent tablets and deactivate the leftover phosphide in the open air before disposal, as set out on the label.
Safety
Signal heading: DANGEROUS POISON (Schedule 7). Keep out of reach of children. Read the safety directions before opening or using.
- Very dangerous. The tablets release phosphine slowly in moist air and immediately if wet. Phosphine can kill if inhaled or swallowed.
- PPE when opening containers and applying: elbow-length PVC gloves and a full face piece respirator with a combined dust and gas cartridge (canister), or a supplied air respirator. Wash gloves and respirator after each day's use.
- Re-entry after application starts: wear a full face respirator with a particulate (P1) and phosphine gas filter, or self-contained breathing apparatus. Keep wearing it until a gas measuring device shows the area is clear or the total fumigation period has passed.
- Open containers in the open air, pointing them away from your face and body, because a flash flame is possible.
- Do not confine product in small gas-proof enclosures such as plastic bags, because of the fire or explosion risk.
- Use the entire contents in one operation. If that is not possible, seal the container thoroughly with waterproof adhesive tape or an airtight closure.
- Store in the closed original container in a cool, dry, well-ventilated, locked area, away from water and other liquids. Do not store or carry in vehicle cabins.
- Highly toxic to wildlife and dangerous to fish. Do not contaminate waterways.
- Poisons Information Centre: 13 11 26. Do not give direct mouth-to-mouth resuscitation.
FAQ
- Can I fumigate a shipping container, truck or occupied building with QuickPhos? No. The label prohibits use in road transport vehicles (including road-hauled containers), in containers, railcars or vessels that are or may be in transit during exposure or ventilation, and in inhabited buildings. It also cannot be used where gas could leak into working areas. If the commodity has to be moved before the total fumigation period ends, do not start the fumigation.
- My silo isn't fully gas-tight. Can I add more tablets or shorten the exposure to compensate? No. A higher dose does not make up for gas loss from an unsealed structure. A shortened exposure period cannot be offset by a higher dose either. Doses above label rates can push gas concentrations towards the lower flammability limit (1.79% by volume). Under-dosing, leaky storages and short exposures also contribute to phosphine resistance in storage pests (Group 24A).
- The 1.5 kg flask holds 500 tablets. What if I don't need them all? Use the entire contents in one operation where possible. If you cannot, seal the flask thoroughly with waterproof adhesive tape or an airtight closure, and store it away from water and other liquids. Moisture triggers phosphine release. For smaller jobs, the label also lists a 300 g (100-tablet) pack size.
Pack Size
- 1.5 kg flask containing 500 × 3 g tablets
- How to order: Garrards product code QUICK/1.5





