Smokes and Fumigants

QUICKFOS FUMIGATION TABS-300GM

Active ingredient334 g/kg phosphine (PH3), present as aluminium phosphide. Each 3 g tablet releases 1 g of phosphine.

Code QUICK/300

Downloads

Product details

Formulation

  • Formulation type: fumigation tablets (3 g aluminium phosphide tablets that release phosphine gas when exposed to air)
  • Mode of action: Group 24A insecticide
  • Signal heading: DANGEROUS POISON (Schedule 7)

Overview

QuickPhos Fumigation Tablets are an aluminium phosphide fumigant made by UPL Australia and registered by the APVMA (Approval No. 46948/106465). The tablets react with moisture in the air and slowly release phosphine gas. The gas moves through stored commodities and controls insect pests of stored products. The product is also registered for fumigating rabbit burrows.

In a well-sealed structure or enclosure, phosphine kills all life stages of storage pests: eggs, larvae, pupae and adults. This lets Pest Management Professionals clear an infestation from inside a bulk commodity, not just from its surface. Treated commodities can be shipped once the minimum exposure period and the ventilation period are complete.

Phosphine is extremely toxic and flammable, so this product is for trained Pest Management Professionals working only where the safety of workers and the public can be ensured. Results depend on good sealing, and on commodity temperature, humidity and exposure time.

Product Highlights

  • Simple dosing: each 3 g tablet releases a fixed 1 g of phosphine, and the label doses by the internal volume of the structure. You can work out the number of tablets directly from the size of the silo, shed or enclosure.
  • Kills all life stages: phosphine penetrates through the commodity to kill eggs, larvae, pupae and adults in well-sealed enclosures. This cuts the risk of re-infestation from surviving immature stages.
  • One product, many situations: covers raw cereal grains, milled and processed foods, dried fruit, pulses, oilseeds, cocoa and coffee beans, seeds for propagation, bulk stockfeed, baled or cased tobacco, empty storage structures and rabbit burrows. UPL makes the tablets with stabilising and binding materials so the gas is released gradually (delayed action).

Target pests

Insect pests of stored products, including:

  • Lesser grain borer
  • Cadelle
  • Cigarette beetle
  • Confused flour beetle
  • Dried fruit beetle
  • Flat grain beetle
  • Merchant grain beetle
  • Red-legged ham beetle
  • Rust-red flour beetle
  • Sawtoothed grain beetle
  • Skin and hide beetle
  • Spider beetles
  • Warehouse beetle
  • Angoumois grain moth
  • Indian meal moth
  • Mediterranean flour moth
  • Mottled grain moth
  • Raisin moth
  • Tobacco moth
  • Tropical warehouse moth
  • Psocids
  • Stored products mites
  • Bean weevil, coffee bean weevil, granary weevil, maize weevil, pea weevil and rice weevil
  • Rabbits (burrow fumigation in NSW, VIC, QLD, SA, WA and ACT only)

Where to use

Use only in structures and enclosures that are well sealed. This means porous surfaces, seams and cracks are permanently sealed, and intakes, outlets, doors, fan housings, windows and hatches are temporarily sealed.

  • Well-sealed fumigation enclosures and chambers, grain storage sheds, silos and other structures suitable for fumigation
  • Commodities fumigated under gas-proof sheeting
  • Raw cereal grains such as barley, maize, millets, oats, rice, rye, sorghum, triticale and wheat
  • Other food commodities such as flour and other milled cereal products, breakfast cereals, dried fruits, dried vegetables, dried pulses, other dried foods, peanuts, oilseeds, and cocoa and coffee beans
  • Seeds for propagation and bulk stockfeeds
  • Tobacco in bales, cases or hogsheads inside well-sealed fumigation enclosures
  • Empty well-sealed warehouses, elevators, stores, structures and enclosures
  • Rabbit burrows in NSW, VIC, QLD, SA, WA and ACT only
  • Do not use in: inhabited buildings, work areas where gas could leak, road transport vehicles (including trucks and road-hauled containers), or commodities, containers, railcars or vessels that are in transit or likely to be in transit

Application

Tablets are placed by hand. Dose by the internal volume of the structure, whether it is full, part-filled or empty. Always follow the label for dose, exposure, ventilation and withholding periods.

  • Silos and bulk storages: lay tablets in a single layer on non-flammable trays or sheets spread evenly over the commodity surface, keeping them separate from the commodity
  • Under gas-proof sheeting: space tablets on non-flammable trays or sheets between and/or alongside stacks so gas can circulate freely, then seal the sheeting gas-tight
  • Empty storages and enclosures: space tablets on non-flammable trays or sheets, starting at the point furthest from the exit, then make the enclosure gas-tight and lock and seal the exit door
  • Do not apply as a surface-only treatment where the structure is more than twice as high as it is wide, unless a gas recirculation device is fitted
  • Do not heap tablets (this limits gas release) and never add water
  • Rabbit burrows: place tablets well down the tunnel, then plug the opening firmly with soil
  • Open the container in the open air and use the whole contents in one operation. If you cannot, reseal with waterproof adhesive tape or an airtight closure
  • Ventilation is complete only when phosphine readings in the enclosure and work area are below the 0.3 ppm exposure standard. Confirm with gas detection tubes or other measuring devices
  • After fumigation, remove spent tablets and destroy any remaining phosphide (for example by swamping with dilute acid or soapy water in the open air until bubbling stops), then dispose of residues in an approved disposal pit

Safety

DANGEROUS POISON (Schedule 7). Keep out of reach of children. Read the safety directions before opening or using.

  • PPE when opening containers and applying: elbow-length PVC gloves and a full face piece respirator with combined dust and gas cartridge (canister), or a supplied air respirator
  • Re-entry during fumigation, or after treated commodity has been emptied: full face respirator with particulate (P1) and phosphine gas filter cartridge, or self-contained breathing apparatus, until a measuring device shows the area is free of phosphine or the total fumigation period has passed
  • Flammable: keep away from naked flames. Open containers in the open air, pointed away from the face and body, as a flash flame is possible
  • Keep away from water and liquids, which cause immediate release of phosphine. Never confine the product in small gas-proof enclosures such as plastic bags (fire or explosion risk)
  • Display 'DANGER – POISON GAS – KEEP AWAY' signs at all approaches to the fumigation site
  • Do not store or carry in vehicle cabins, glove compartments or other shared air spaces. Store locked, cool, dry and well ventilated, in the original container
  • Phosphine corrodes copper and copper alloys. Seal or remove electrical and electronic equipment, photographic film and copy paper
  • Highly toxic to wildlife and dangerous to fish. Do not contaminate waterways
  • First aid: contact a doctor or the Poisons Information Centre on 13 11 26

FAQ

  • My silo or shed isn't fully gas-tight. Can I just add more tablets? No. Fumigation controls all insect stages only in well-sealed structures, and a higher dose will not make up for gas lost through leaks. Using it in unsealed storage, at low doses or with shortened exposure is against the label and helps phosphine resistance develop (Group 24A). Higher-than-label doses can also push gas towards its lower flammability limit of 1.79% by volume.
  • Are there conditions where it shouldn't be used? Yes. Do not use when commodity temperature is below 15°C, when relative humidity inside the structure is below 25%, or on raw cereal grains with moisture content below 9%. Tablets react and insects die more slowly at lower temperatures, so the label sets longer minimum exposure periods for cooler commodities. Do not start fumigating if the commodity may need to be moved before the total fumigation period is over.
  • Is it compatible with food commodities, stockfeed and on-site equipment? It is registered for raw grains, processed foods, seed for propagation, bulk stockfeed and tobacco. Treated produce must not be used for human consumption or stock food until the withholding period after fumigation has passed (no withholding period applies to tobacco). Unreacted phosphide residue is harmful to livestock and poultry. Phosphine corrodes copper-based materials, so protect computers, meters, switches and fire alarm systems before treatment.

Pack Size

How to order

  • 300 g flask containing 100 × 3 g tablets
  • Garrards product code: QUICK/300