From 1 September 2014, all TermX replenishment system hosing has been manufactured in a safety red colour with a 600 PSI pressure rating. The change to the TermX replenishment system makes the pipework instantly recognisable as part of a termite management system, so it is less likely to be mistaken for garden irrigation during and after installation.

What’s changed
- Colour: TermX hosing is now safety red instead of the previous colour, for easy identification during and after installation.
- Pressure rating: the hosing carries a 600 PSI rating.
- Effective date: hosing manufactured from 1 September 2014.

What is a termite replenishment system?
A replenishment (reticulation) system is a network of perforated pipe installed under and around the slab edge, footings and service penetrations of a building at construction stage. Instead of trenching or drilling to reapply termiticide when the original chemical treated zone reaches the end of its label life, the pest manager connects a pump to the system’s access points and reinjects termiticide through the pipe network. This restores the treated zone under paths, paving and landscaping without disturbing the finished property.
Under Australian Standard AS 3660.1, a chemical treated zone installed at construction is a recognised termite management system, but it must be maintained. Replenishment systems such as TermX make that ongoing maintenance practical, particularly for slab-on-ground homes where the perimeter is later covered by concrete, pavers or decks.
Why the red hosing matters
Black or dark poly pipe under a slab edge looks very much like drip irrigation. Over the life of a home that creates real risks:
- Landscapers, plumbers or the homeowner may cut, tee into or bury the pipe, thinking it is an irrigation line.
- The system may be connected to a garden tap or irrigation controller, flooding the treated zone with water.
- Future owners may not realise a replenishment system exists at all and pay for a drilled-and-injected treatment they did not need.
Safety red hosing gives homeowners, builders and other trades an immediate visual cue that the pipe is part of a termite barrier, not irrigation. The 600 PSI rating also provides a clear specification for the pressures involved in reinjecting termiticide.

What it means for installers and pest managers
- New installations – specify TermX red hosing on new builds and show the builder and homeowner where the access points are.
- Documentation – record the system on the durable notice fixed in the meter box, and include the layout, access-point locations and the termiticide used in the certificate of installation handed to the client.
- Existing systems – older TermX installations with non-red hosing are still valid; make sure the client’s records clearly identify the system so it is not confused with irrigation.
- Replenishment – reinject only with a termiticide registered by the APVMA for use in reticulation systems, at the label rate and volume, using a pump suited to the hosing’s pressure rating.
- Client education – remind homeowners at each annual inspection that the red pipe is a termite system and must not be cut, connected to water or covered without advice.
Safety and compliance
- Termiticides used to charge or replenish a reticulation system must be APVMA-registered for that use and applied by a licensed pest management technician.
- Follow the label’s PPE and environmental directions, and take care to avoid run-off into stormwater drains during reinjection.
- Installation at construction stage should comply with AS 3660.1 and the relevant state building requirements, with the durable notice and certification completed.
Available from Garrards
TermX replenishment system components, installation accessories and registered termiticides for reticulation are available through Garrards branches. Contact your local branch for further information on the system and its specifications.
Contact your local Garrards branch
Frequently asked questions
Why is TermX hosing red?
Safety red makes the hosing easy to identify during and after installation, so homeowners and other trades recognise it as a termite barrier rather than an irrigation line.
What is the pressure rating of TermX hosing?
TermX replenishment hosing manufactured from 1 September 2014 carries a 600 PSI rating.
Do older TermX systems need to be replaced?
No. The colour change applies to hosing manufactured from September 2014. Existing installations remain valid; ensure the client’s documentation clearly identifies the system.
