The Greenzone termite barrier range gives Australian builders and pest managers a set of pre-construction termite management products built around one idea: a termite repellent integrated into expansion-joint foam. Supplied by Green Zone Pty Ltd, a privately owned Australian company, the range covers expansion and contraction joints, service penetrations and slab edges, the points where termites most often find a way into a building.

What is Greenzone?
There are three products in the GREENZONE range:
- GREENZONE Termite & Insect Repellent Barrier
- GREENZONE Sock Termite Barrier
- GREENZONE Termite Management Film
The core innovation is the integration of a termite repellent into expansion-joint foam, which can be applied to all elements of construction that require a termite barrier to comply with Australian Standard AS 3660 (Termite Management), Parts 1 and 3.
Compliance and warranty at a glance
- 50-year product warranty
- APVMA approved for use
- CodeMark certified and fully compliant with the Building Code of Australia (BCA)

GREENZONE Termite & Insect Barrier
The repellent expansion-joint barrier can be used on residential, commercial and industrial sites. It is supplied as 100 mm x 10 mm x 25 m lengths in a two-pack.

The most common applications are:
- Service penetrations
- Expansion and contraction joints
- Infill garages
- Infill basements
- Tilt-slab infill developments
- External perimeters where pathways are present
- Driveways
- Extensions
GREENZONE Sock Termite Barrier

Available in 40, 50, 80 and 100 mm diameters, the Greenzone Sock is described by the manufacturer as the only collar on the market that protects service penetrations from concrete expansion. It suits all construction types, residential, commercial or industrial, and can be fitted to service penetrations either before formwork is laid or afterwards. That gives installers a much wider window of opportunity than other penetration collars.
GREENZONE Termite Management Film

Available in 100, 150, 200 and 300 mm widths on 50 m rolls, GREENZONE Termite Management Film is a flexible physical termite risk-management measure classed as a chemical barrier in a non-soil matrix. It is a once-only treatment designed to last the economic life of the building.
Where Greenzone fits in Australian termite management
Subterranean termites cause significant damage to Australian buildings every year, and AS 3660 sets out how new construction should be protected. Termites typically enter through concealed paths: cracks and joints in slabs, gaps around pipes and conduits, and the interface between slab and pathway. Products such as Greenzone are installed at those points during construction so the completed building has a continuous termite management system that can be inspected and documented. Pre-construction barriers do not replace regular termite inspections, which remain a key part of any integrated termite management program.
Compliance notes
- Install strictly according to the manufacturer’s instructions and the product label; APVMA registration and any warranty depend on correct installation.
- Termite management work is licensed in every Australian state and territory. Check your licence covers pre-construction termite management.
- Issue the durable notice and certification required under AS 3660 and the National Construction Code on completion.
Downloads
- Greenzone Termite Management Film flyer (PDF)
- Greenzone Sock Termite Barrier flyer (PDF)
- Greenzone 4-page brochure (PDF)
Frequently asked questions
Is Greenzone a physical or chemical barrier?
The Termite Management Film is classed as a chemical barrier in a non-soil matrix: a flexible physical product carrying a termite repellent. The expansion-joint barrier and Sock likewise combine a physical component with an integrated repellent.
Can the Greenzone Sock be fitted after formwork?
Yes. The Sock can be applied to service penetrations before or after formwork is laid, which is one of its main practical advantages.
Which sizes are stocked?
Film: 100, 150, 200 and 300 mm widths (50 m rolls). Sock: 40, 50, 80 and 100 mm diameters. Barrier: 100 mm x 10 mm x 25 m two-pack. Check with your branch for current availability.
Available from Garrards
The full Greenzone range is available through Garrards branches across Australia, alongside the rest of our termite management products and equipment.
Contact your local Garrards branch
Frequently asked questions
Is Greenzone a physical or chemical barrier?
The Termite Management Film is classed as a chemical barrier in a non-soil matrix: a flexible physical product carrying a termite repellent. The expansion-joint barrier and Sock likewise combine a physical component with an integrated repellent.
Can the Greenzone Sock be fitted after formwork?
Yes. The Sock can be applied to service penetrations before or after formwork is laid, which is one of its main practical advantages.
Which sizes are stocked?
Film: 100, 150, 200 and 300 mm widths (50 m rolls). Sock: 40, 50, 80 and 100 mm diameters. Barrier: 100 mm x 10 mm x 25 m two-pack. Check with your branch for current availability.
