Foaming

400CT 240V BLUE VERSAFOAMER COMPLETE W/BOX

Code BG/16201002

CategoriesFoamingFoaming

Product details

Overview

The B&G Versafoamer 4000 (240V, blue case) is a complete electric foam application system. It turns a liquid insecticide or termiticide mix into a wet foam and delivers it into wall voids, drains, floor voids and the soil beneath concrete slabs. Liquid sprays struggle to reach and stay in these areas.

Foam expands to fill an enclosed space and carries the active into areas where pests nest and travel. This makes it a practical tool for Pest Management Professionals carrying out termite spot treatments, ant and cockroach work, and drain fly treatments in commercial kitchens.

The kit includes a quiet air compressor, a 3.8 L stainless steel tank with pressure gauge, 2.1 m of hose, a valve with a 20 cm curved applicator tip and a sub-slab injection nozzle, all in a carry case. You supply the registered chemical and the foaming agent.

Product Highlights

  • Self-regulating compressor: it maintains tank pressure automatically, so the foam stays consistent throughout the job with no adjustments and no hand pumping.
  • Works off the power too: pressurise the tank, disconnect it from the compressor and carry it on its own into tight areas. A fully pressurised tank gives up to about 40 seconds of foam for spot treatments.
  • Complete, contained kit: the stainless steel tank, hose, curved tip, sub-slab nozzle and compressor all pack into a leak-proof carry case. You can also operate it with the case lid closed, which helps with spill control and transport between jobs.

Target pests

The Versafoamer only delivers the treatment. Which pests you can treat, and where, depends on the label of the registered product you put in the tank. Typical foam targets include:

  • Termites (wall voids, galleries and sub-slab spot treatments)
  • Ants
  • Cockroaches
  • Drain flies and other small flies
  • Bed bugs

Where to use

Suitable for residential and commercial jobs, indoors and outdoors, wherever the label of the product being applied allows foam application.

  • Wall voids, including behind walls and cabinets
  • Floor drains and drain lines
  • Floor voids
  • Sub-slab treatment through drilled holes in concrete
  • Commercial kitchens, restaurants, apartment complexes and private homes

Application

Mix and apply all chemicals according to their label directions. Follow the Versafoamer owner's manual for how to operate the equipment.

  • Fill: with the compressor switched off and unplugged, mix the insecticide or termiticide in the tank using the volume marks on the side. Then add the foaming agent. The machine cannot make foam without a foaming agent. Don't overfill the tank, so there is enough air space to build pressure.
  • Pressurise: plug into a 240V outlet and switch the compressor on. It cycles on and off to hold the tank at operating pressure.
  • Tank in case: use the hose and curved tip to treat drains, wall voids and other spaces.
  • Tank removed: fully pressurise, disconnect the tank from the compressor hose and lift it out of the case. Apply foam in short bursts to drains and other hard-to-reach sites.
  • Wall voids: drill a small access hole between studs, insert the curved tip and rotate it in an arc so the foam reaches the studs and plate below.
  • Sub-slab: drill through the concrete, insert the straight sub-slab tip with its stopper to prevent leakage, and inject foam into the soil beneath.

Safety

The Versafoamer is application equipment, so the PPE and safety directions come from the label and SDS of the product you are applying.

  • Wear the PPE listed on the label of the chemical in the tank.
  • Switch off and unplug the compressor before filling or opening the tank.
  • This is a 240V electrical appliance. Keep the compressor and plug away from liquids, and check the cord before each use.

FAQ

  • What do I need to add to start foaming? A registered insecticide or termiticide whose label allows foam application, plus a compatible foaming agent. Neither comes with the kit. Without a foaming agent, the unit will only spray liquid or air.
  • Will it make dry foam? No. The Versafoamer 4000 produces wet foam only. If foam is thin or watery, check how much foaming agent you have added, and check the siphon tube and seals for blockages or air leaks.
  • Why choose this over a hand-pump foamer? Hand-pump units such as the Versafoamer HH lose pressure as you work and need re-pumping. The 4000's compressor keeps the pressure constant, which gives more consistent foam on longer jobs such as treating many wall voids or several drains. The trade-offs: it needs a 240V power supply for continuous use (about 40 seconds of foam per charge when disconnected), and it is heavier to carry than a hand-held unit.

Pack Size

Sold as 1 complete kit: B&G Versafoamer 4000, 240V, blue carry case.

  • Includes: quiet air compressor, 3.8 L stainless steel tank with pressure gauge, 2.1 m hose, valve with 20 cm curved applicator tip, sub-slab injection nozzle, carry case
  • Not included: insecticide/termiticide and foaming agent
  • How to order: Garrards product code 16201002