Product details
Overview
The Termifoam 1.2L Termiticide Foam Injector is a small hand-pumped foamer. Pest Management Professionals use it to apply foam-based termiticide into wall cavities and other small enclosed spaces.
Spot treatments around window frames, skirtings and wall voids need the termiticide placed exactly where termites are active. This unit holds 1.2 L and builds pressure with a manual hand pump. It delivers foam through a flexible tube and a 5 mm stainless steel injection nozzle, so you can treat small areas without a power supply or a large rig.
Product Highlights
- Precise placement: the 5 mm stainless steel injection nozzle on a flexible tube lets you put foam into wall cavities and tight spaces around frames and skirtings with little wastage.
- Pressure control: maximum working pressure is 3 bar (44 PSI), and a safety pressure valve guards against over-pressurising the tank.
- Easy to carry and check: the 1.2 L poly tank weighs about 0.5 kg, has a liquid level indicator so you can see what is left during a job, and uses EPDM seals.
Where to use
Use it only where the termiticide you are applying is registered for use.
- Wall cavities
- Window frames
- Skirtings
- Other small enclosed spaces where foam application suits the job
Application
The rates, mixing and placement come from the label of the termiticide you are applying, not from this equipment.
- Fill the poly tank with a foam-based termiticide mixed according to that product's label. Use the liquid level indicator to check the fill level.
- Build pressure with the manual hand pump. Do not go above 3 bar (44 PSI).
- Inject the foam through the flexible tube and 5 mm stainless steel nozzle into the cavity or void you are treating.
- Let the safety pressure valve release excess pressure. Do not tamper with it or bypass it.
Safety
This unit is application equipment, not a chemical. Wear the PPE and follow the first aid and poisons schedule details on the label of the termiticide you load into it.
Do not exceed the 3 bar (44 PSI) maximum pressure, and keep the safety pressure valve working.
FAQ
- Can I use any termiticide in it? Use only termiticides whose label allows foam application in the situation you are treating, and mix to that label. The seals are EPDM. If you plan to use anything other than a water-based mix, check with Garrards first that it is compatible with the seals.
- Is 1.2 L enough for larger jobs? This unit suits small, targeted work such as window frames, skirtings and individual wall cavities. For larger foam jobs, a 5 L pump-up foam injector rated to 44 PSI is also available.
- Do I need it if I use Termidor Foam? No. Termidor Foam is a ready-to-use aerosol that comes with its own injector tip. The Termifoam injector is for termiticides that you mix and foam yourself.
Pack Size
Sold as one 1.2 L foam injector unit.
- Liquid capacity: 1.2 L
- Dimensions: 35 × 20 × 13 cm
- Weight: 0.5 kg
- How to order: VOL/FOAM/1.2





