Product details
Formulation
- Formulation type: water-based suspension concentrate (SC)
- Insecticide group: Group 3A
- APVMA registration: No. 64877
Overview
BIFORCE 200SC is a water-based termiticide and insecticide that contains 200 g/L bifenthrin. It is registered with the APVMA for pre-construction and post-construction management of subterranean termites. It is also registered to control a range of urban pests indoors and outdoors.
Pest Management Professionals can use the same concentrate for termite soil barriers and for general pest work. Termite uses include barriers under slabs and around perimeters, delivery through certified reticulation systems, treatment of poles and fence posts, and nest eradication. Urban pests are killed both on direct contact with the spray and by residual action when they cross treated surfaces.
BIFORCE 200SC is a restricted chemical product. It can only be supplied to, or used by, an authorised person, and the operator must hold a licence under state legislation. Termite barriers must be installed in accordance with the Australian Standard AS 3660 Series.
Product Highlights
- One product for termite and general pest work: it covers pre-construction, post-construction, perimeter, reticulation, pole and fence post, and nest treatments, as well as spiders, ants, cockroaches, wasps, fleas, flies, mosquitoes and ticks. This means fewer products to stock in the vehicle.
- Long expected protection periods: south of the Tropic of Capricorn, the expected protection period is at least 10 years at the top label rate. North of the Tropic of Capricorn, it is up to 5 years. Actual protection depends on termite hazard, climate, soil conditions and the rate used.
- Water-based suspension concentrate that is approved for use through certified reticulation systems. Perimeter and service penetration barriers can be replenished without disturbing the soil.
Target pests
- Subterranean termites (all states except Tasmania)
- Spiders
- Paper nest wasps
- Ants (excluding red imported fire ants)
- Cockroaches
- Mosquitoes
- Fleas
- Flies
- Ticks (excluding the paralysis tick, Ixodes holocyclus), adults and nymphs
Where to use
- Urban pests (all states): internal and external areas and surrounds of domestic, commercial, public and industrial buildings and structures
- Subterranean termites (all states except Tasmania): domestic, public, commercial and industrial areas
- Pre-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
- Perimeter barriers for new and existing buildings
- Post-construction barriers under and around existing buildings
- Certified reticulation systems for perimeter and service penetration barriers, and for cavity infill and footing barriers
- Protection of service poles and fence posts
- Termite nest eradication in trees, poles, posts and stumps
- Do not use in cavity walls, except through certified cavity infill reticulation systems or for direct treatment of a nest
Application
Add to water in the spray tank and mix thoroughly. Keep the mix agitated during mixing and application. Use the label for all rates, volumes and critical comments.
- Termite barriers: install complete and continuous horizontal and vertical barriers to the AS 3660 Series. Methods include open wand application, trenching and treating backfill, soil rodding, and sub-slab injection through drilled holes.
- Horizontal barriers: use low-pressure, high-volume equipment that delivers large, coarse droplets to minimise drift. Adding a marker dye is recommended, and a soil surfactant can help on hard-to-wet soils.
- Sub-slab injection: equipment must be leak-free and the injector must have tip shut-off. Lateral dispersion tips are recommended. Reseal drill holes after treatment.
- Reticulation: use only certified systems, installed to the manufacturer's specifications and able to distribute the solution as required by the label and AS 3660.
- Urban pests: apply a coarse, low-pressure surface spray to the point of run-off. For crack and crevice work, use a solid stream nozzle. Paper nests can be sprayed directly, and perimeter band treatments can be applied to soil, vegetation and foundations.
- Do not apply to excessively wet soil or straight after heavy rain.
- Inspect at least once a year, as set out in AS 4349.3. The finite barrier life and the annual inspection recommendation must be stated on the durable notice required by the BCA.
Safety
POISON — Schedule 6 (S6). Restricted chemical product.
- Opening, mixing and loading: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length chemical-resistant gloves, face shield or goggles, and chemical-resistant footwear
- Using the prepared spray: cotton overalls, washable hat and elbow-length chemical-resistant gloves
- In enclosed areas, also wear a half-face respirator with a combined dust and gas cartridge
- Hazards: poisonous if swallowed; irritates the eyes and skin; repeated exposure may cause allergic disorders
- Re-entry: keep people and pets out of treated areas until the spray has dried
- Dangerous to fish and aquatic organisms. Cover or remove fish ponds and aquariums before spraying.
- Poisons Information Centre: 13 11 26
FAQ
- Can BIFORCE 200SC be used through reticulation systems or together with physical barriers? Yes, through certified reticulation systems that can distribute the solution as required by the label and AS 3660. If reticulation is used only for perimeter or service penetration barriers, a full pre-construction horizontal soil barrier is also recommended. Where it is combined with a physical barrier, each certified system must be installed to its own specification and to AS 3660.
- Can I use it for termite work in Tasmania? No. Termite uses are registered for all states except Tasmania. Urban pest uses are registered for all states.
- What are the main limitations? It is not registered for red imported fire ants or the paralysis tick. It must not be used in cavity walls except through certified cavity infill systems or for direct nest treatment. Termite barriers have a finite life, need inspection at least once a year, and must be reapplied if construction, excavation or landscaping disturbs them. As a Group 3A insecticide, it should be used with a resistance management strategy in mind.
Pack Size
- Pack size: 5 L
- Product dimensions: 19 × 13 × 31 cm; weight 5.5 kg
- How to order: product code BIFORCE/200/5
- Restricted chemical product: supplied only to authorised persons





