Product details
Formulation
- Formulation: ready-to-use insecticidal dusting powder, industrial strength. No diluent required.
- Insecticide group: Group 3A (permethrin) and Group 15A (triflumuron)
- APVMA approval number: 69956/105745
Overview
StarrDust PRO 'One-Shot' 400 g is a pod prefilled with StarrDust PRO industrial-strength insecticidal dusting powder. The pod screws straight onto the StarrDust PRO Duckbill Duster head. Pest Management Professionals use it to treat cracks, crevices, voids and hard-to-reach harbourages, particularly where liquid sprays may not be used, such as around electrical equipment, in roof voids and wall cavities, and behind cupboards.
The dust contains two actives. Permethrin (Group 3A) controls adult insects. Triflumuron (Group 15A) is an insect growth regulator (IGR) that works on developing stages. With both in one dust, a single application targets the active population and the next generation.
StarrDust PRO is registered by the APVMA for cockroaches, ants, spiders, silverfish, bedbugs, fleas and a range of other pests in domestic, institutional and industrial premises. The 'One-Shot' pod format means you don't need to decant dust from bulk packs on site.
Product Highlights
- Adulticide and IGR in one dust: permethrin controls adults, and triflumuron disrupts insect development. Combining two insecticide groups (3A and 15A) helps break pest breeding cycles in harbourages that are left undisturbed.
- Prefilled, screw-on pod: the 400 g pod fits directly onto the Duckbill Duster head, so there is no decanting on site. That means less spillage, less mess and less operator contact with the dust. The Duckbill Duster fits the Makita and Hitachi blowers commonly used by Pest Management Professionals.
- Broad label in one product: the label covers 15 pest types, including slaters (woodlice), millipedes, clothes moths and bird mites as well as common crawling insects. That lets one dust handle many general pest call-outs, including situations where liquids are unsuitable.
Target pests
- Cockroaches
- Silverfish
- Spiders
- Ants
- Fleas
- Carpet beetles
- Bedbugs
- Slaters (woodlice)
- Millipedes
- Clothes moths
- Hide beetles
- European wasp
- Feral honey bee
- Bird mites
- Subterranean termites (Coptotermes spp.) in trees and stumps in urban areas
Where to use
- Domestic, institutional and industrial premises
- Food preparation and storage areas, after removing or covering all exposed food, dishes, utensils and food-contact surfaces
- Living and sleeping areas, including bedsteads, mattresses, floor coverings, carpets and upholstered furniture (bedbugs, fleas, carpet beetles)
- Roof, floor and wall voids, crawl spaces and basements
- Around electrical equipment and behind cupboards
- Skin and hide preparation areas: skins on drying racks and exposed edges of dried, baled skins
- Large European wasp nests
- Feral honey bee nests in wall cavities
- Roof voids of houses that have harboured nesting birds
- Trees and stumps in urban areas infested with subterranean termites (Coptotermes spp.)
Application
The product is ready to use. Before use, shake or invert the pod to loosen the dust, remove the screw-top lid and screw the pod onto the Duckbill Duster head. Leave the powder undisturbed for as long as possible after application. Follow the label for rates and critical comments for each situation.
- Cracks, crevices and voids: blow the powder into cracks, crevices, roof voids and wall cavities using a powder blower. Focus on warm, dark areas around cookers, fireplaces, radiators, stoves, pipes and rubbish chutes.
- Ants, slaters and millipedes: apply along trails, on and around nests, and along the routes by which they enter premises.
- Fleas and carpet beetles: dust over the floor, brush the powder into the carpet pile and blow it into areas where larvae are found.
- Hide beetles: apply with a manual or motorised duster.
- Wasp and bee nests: the label specifies a hand duster through the nest entrance holes. Treat at night where possible.
- Bird mites: cover roof void areas with a powder blower. Remove nests and bird-proof the roof void to prevent recurrence.
- Termites in trees and stumps: the label specifies drilled holes and a carbon dioxide gas cylinder with trigger gun. Afterwards, coat and seal the holes as directed on the label.
Safety
Signal heading: CAUTION. Keep out of reach of children. Read the safety directions before opening or using.
- Will irritate the eyes and skin. Repeated exposure may cause allergic disorders. Do not inhale the dust.
- PPE when opening and using: cotton overalls buttoned to the neck and wrist, a washable hat, goggles, rubber gloves and a disposable dust mask covering the mouth and nose.
- Wasp and bee nest work: protective clothing including long-sleeved overalls buttoned at wrist and neck, gloves, hat and bee veil.
- Do not apply dust directly onto people. Avoid contact with food, food utensils and food-contact surfaces.
- Toxic to bees and reptiles. Dangerous to fish and other aquatic organisms. Do not contaminate ponds, waterways or ditches.
- Cover or remove open food and water containers, fish ponds and aquariums before dusting.
- Wash hands after use. After each day's use, wash gloves, goggles and contaminated clothing.
- First aid: if poisoning occurs, contact a doctor or the Poisons Information Centre on 13 11 26.
FAQ
- Can I use it in commercial kitchens, homes with pets, or premises with aquariums? Yes, within label limits. Food preparation and storage areas are approved situations, but first remove or cover all exposed food, dishes, utensils and food-contact surfaces. Cover or remove pet food and water, fish ponds and aquariums before dusting, because the product is dangerous to fish.
- Will the pod fit my existing equipment? The pod is made to screw onto the StarrDust PRO Duckbill Duster head, and the duster attaches to common Makita and Hitachi blowers. The duster is not included with the pod. Some label situations need other equipment: a hand duster for wasp and bee nests, and a carbon dioxide cylinder with trigger gun for termites in trees and stumps.
- Will it control insecticide-resistant populations? Two insecticide groups (3A and 15A) give two modes of action. However, the label warns that naturally resistant biotypes may exist and can come to dominate a population if Group 3A and 15A products are used repeatedly. Use it as part of a rotation and resistance management program, not as a guaranteed fix.
Pack Size
- Pack size: 400 g prefilled 'One-Shot' pod for use with the StarrDust PRO Duckbill Duster
- How to order: use Garrards product code STARR/OS400





