Projahn Zentro Plus SDS Drill Bits, Tested at Garrards

Drilling is the part of a termite job that eats time and equipment. A blunt bit takes forever to bore a hole, loads the drill, and becomes dangerous if it overheats and breaks. Garrards became the Australian distributor for Projahn and tested the 4×4 Zentro Plus SDS hammer drill bit against the leading standard dual-tip bit to see whether it justified the change.

The test

Projahn Zentro drill bit range
The Projahn Zentro range.

Garrards first drilled a run of consecutive holes with the leading SDS+ brand using its standard dual cutting tip, and photographed the best of them. The Projahn bit was then run through the same test. After hitting metal reinforcement three times, it was still boring precise, smooth holes with considerably less chipping around the edge.

A cleaner hole is not cosmetic on a termite job. It sits properly under a concrete seal, it does not chip out the client’s paving or tiling, and it is the difference between a finish the customer complains about and one they never mention.

Why the four-head tip works

The Zentro drill bits have a four-head fluted tip rather than the conventional two-head design. Projahn reports this makes cutting concrete faster with fewer cracks while the bit works less hard, translating to around five times the durability of a typical two-head concrete drill bit.

The four separate fluted tips on the SDS+ bits have corresponding channels that funnel debris and dust away as the bit cuts through concrete, which is what keeps the cutting rate up on a deep hole.

Where it fits

Australian termite work means drilling through slabs, paths, patios and slab edges at volume – a perimeter treatment on a typical suburban house can run to well over a hundred holes at 300 mm centres. Bit life and hole quality are direct costs on that job, and heat-damaged bits are a genuine safety issue for the technician on the drill.

Pricing

German-engineered tooling usually implies a German price. As the authorised Australian distributor for Projahn, Garrards was able to bring the price down; contact your local branch for current pricing.

Available from Garrards

Contact your nearest Garrards branch for current Projahn stock, sizes and pricing.

Contact your local Garrards branch