Led Lenser F1: 400 Lumen Compact Torch for Pest Inspections

The Led Lenser F1 torch is a compact, high-output light that Led Lenser calls the fighter jet among small torches. It produces 400 lumens from a single CR123 lithium battery in a body just 88 mm long and 69 g in weight, which makes it a practical pocket light for pest managers who spend their days in roof voids, subfloors and dark cupboards.

Key features

  • 400 lumens from one CR123 battery, among the first in its class to reach this output.
  • Xtreme Power LED with a beam range of 100 m.
  • HA III hard anodising to military standards for scratch and corrosion resistance.
  • Watertight to IPX8.
  • Electronic regulation with a temperature sensor to protect the LED and battery.
  • Tail stand so it can be set on a flat surface as an area light.
  • Replaceable glass-breakage ring on the head.
  • Usage-optimised light functions for different tasks.
Led Lenser Smart Light Technology three-function switching diagram
Three-function light programming.

Technical data

LED Xtreme Power LED
Length 88 mm
Weight 69 g
Luminous flux 400 lm (maximum)
Battery 1 x CR123 lithium
Energy tank 4.2 Wh
Burn time up to 120 min
Beam range 100 m (maximum)

Why a good torch matters in pest management

A visual termite inspection to AS 3660.2 depends on seeing mud leads, frass, subfloor timbers and roof framing clearly, and much of that work happens in unlit spaces. A high-output torch with a tight beam lets you scan a subfloor from the access hatch, pick up the sheen of a live mud tube on a pier, and read the grain of timber for surface damage. The same light is used for cockroach inspections behind kitchen equipment, checking rodent activity in ceiling voids, and locating wasp and bee entry points under eaves at dusk. A small torch that lives in a pocket is the one that is actually with you when you need it.

Practical notes

  • CR123 lithium cells hold their charge well in storage and tolerate the heat of a roof void better than alkaline cells; keep a spare in the vehicle.
  • The temperature sensor will reduce output if the torch runs hot on the highest setting for long periods; this is normal and protects the LED.
  • IPX8 waterproofing means the F1 survives a drop into a wet subfloor or a rinse after a dusty job.
  • Use the tail stand to light a work area hands-free while drilling or setting bait stations.
Led Lenser F1 torch held in hand showing its compact size
The F1 in hand.

Available from Garrards

The Led Lenser F1 and other Led Lenser torches and head lamps are available from Garrards branches. Contact your branch for current models and pricing.

Contact your local Garrards branch

Frequently asked questions

What battery does the Led Lenser F1 use?

A single CR123 lithium battery, which gives the torch a 4.2 Wh energy tank and up to 120 minutes of burn time.

Is the Led Lenser F1 waterproof?

Yes. It is rated IPX8, the highest water-ingress rating in the IP scale, so it tolerates immersion.

How bright is 400 lumens?

For a torch this size, 400 lumens is very bright: enough to light a subfloor or roof void from the access point, with a beam range of up to 100 m.