The TermX termite replenishment system is a buried network of chemical-resistant pipe that lets a pest manager apply termiticide under pressure to the soil beneath a slab or around the perimeter of a building, and then recharge that treated zone in later years without excavation. It was designed by professional pest managers for professional pest managers, and Garrards supplies the complete system to licensed Australian technicians.

What TermX is
TermX is a flexible PVC chemical hose engineered for medium- to high-pressure termiticide delivery. It has a chemical-resistant inner core, a smooth red outer cover that eases installation around difficult surfaces, and a patented fibre matting layer that gives structural integrity between the inner and outer layers. The hose is printed with the TermX name and coloured red so other trades on site can identify it easily and avoid damaging it.
Once buried, either under a new slab before the pour or around the perimeter of an existing structure, the pipe is used to saturate the surrounding soil with termiticide. With a repellent termiticide the treated soil forms a barrier; with a non-repellent termiticide it becomes a treated zone that foraging subterranean termites pass through and pick up a lethal dose.
System components
TermX deliberately uses a small number of parts to reduce the chance of failure in service:
- Chemical-registered pipe
- Hose fittings
- Marine-grade clamps
- PVC stop ends and joiners
- Ball valve filler connector
- Junction box
- Air injection kit (optional)
Kit configurations
- 10 m, fully assembled
- 50 m, kit form
- 100 m, kit form

Where TermX is used
Subterranean termites are active across mainland Australia, and slab-on-ground buildings are vulnerable wherever the slab edge or service penetrations give concealed access. TermX suits:
- Full under-slab installation on new construction, before the slab is poured
- Perimeter installation around existing dwellings and commercial buildings
- Other structures under termite threat, such as utility poles, fences and pergolas
Foaming through TermX

With the optional patented air injection kit, a technician can combine compressed air with a termiticide and foaming agent and deliver foam through the TermX pipe. The foam expands to fill voids and cavities. Foaming agents and termiticides must be used only in combinations and at rates permitted on the relevant APVMA-approved label.
How TermX fits into a termite management program

A certified TermX installer lays the pipe network, records its layout and advises the client on a recharge schedule. The interval depends on the termiticide used and local termite pressure, so set it in writing and keep the client on regular inspections in line with AS 3660. Because the pipe is permanent, each recharge is quick and needs no drilling, trenching or disturbance of landscaping.

Safety and compliance
- Only termiticides registered by the APVMA for reticulation or soil treatment may be applied through the system, and always at label rates.
- Installers and technicians must hold the pest management licence required in their state or territory.
- Wear the PPE specified on the termiticide label and SDS when charging the system.
- A Certificate of Conformity (CodeMark) is available for TermX; see the downloads below.
Downloads
- TermX parts list (PDF)
- TermX Certificate of Conformity (PDF)
- TermX full under-slab installation guide (PDF)
- TermX homeowner brochure (PDF)
- TermX pest manager brochure (PDF)
Available from Garrards
TermX kits, fittings and the optional air injection kit are available through Garrards branches, along with termiticides approved for reticulation use. Ask your branch about installer certification and current kit configurations.
Contact your local Garrards branch
Frequently asked questions
Can TermX be installed on an existing house?
Yes. TermX can be installed as a perimeter system around existing dwellings and commercial buildings, as well as under the slab of new construction before the pour.
How often does a TermX system need to be recharged?
It depends on the termiticide used and the termite pressure at the site. The certified installer should specify a recharge interval for the client based on the product label and local conditions.
Which termiticides can be used in TermX?
Only products registered by the APVMA with label directions covering application through a reticulation or replenishment system, applied at label rates. Check the label and ask your Garrards branch.
