Product details
Formulation
- Emulsifiable concentrate (EC). It mixes with water to form an emulsion for spraying, injecting or pumping through a reticulation system.
- Group 3A insecticide (synthetic pyrethroid)
- Restricted Chemical Product: it may only be supplied to, or used by, an authorised person
- APVMA Approval No. 66127/53735
Overview
COUNTRY Bifenthrin 100 Low Odour Termiticide & Insecticide is a 100 g/L bifenthrin concentrate for Pest Management Professionals. It protects structures from subterranean termite damage and controls termites and a range of urban pests listed in the Directions for Use.
For termite work, it forms continuous horizontal and vertical chemical soil barriers that stop termites getting into a building unseen. Applications must follow the Australian Standard AS 3660 Series. It covers pre-construction, perimeter and post-construction barriers, certified reticulation systems, poles, fence posts, establishing trees and nest eradication.
For general pest work, it kills ants, cockroaches, fleas, flies, mosquitoes, spiders, ticks and papernest wasps on direct contact with the spray. It also keeps working as residual control when pests later contact treated surfaces. Having one concentrate for both termite barriers and external general pest work means fewer products to carry on the vehicle.
Product Highlights
- Termite barriers and general pests from one concentrate: the same product covers termite soil barriers, nest eradication and external treatments for spiders, wasps, ants, cockroaches, mosquitoes, fleas, flies and ticks.
- Long expected barrier life: the label gives expected protection periods of at least 10 years south of the Tropic of Capricorn (except Tas.) and up to 5 years north of it. The actual period depends on the rate, termite hazard, climate and soil conditions.
- Approved for certified reticulation systems: it can be pumped through certified systems for perimeter and service penetration barriers, and for cavity infill and footing barriers. Barriers can then be topped up without trenching or drilling again.
Target pests
- Subterranean termites (all states except Tasmania)
- Spiders
- Papernest wasps
- Ants
- Cockroaches
- Mosquitoes
- Fleas
- Flies
- Ticks, adults and nymphs (excluding the paralysis tick, Ixodes holocyclus)
Where to use
General pests: external areas and surrounds of domestic, commercial, public and industrial buildings and structures, in all states.
Subterranean termites: domestic, public, commercial and industrial areas in all states except Tasmania.
- Pre-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
- Perimeter barriers for new and existing buildings
- Post-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
- Certified reticulation systems for perimeter and/or service penetration treatment
- Certified reticulation systems for cavity infill and footing barriers
- Protection of service poles and fence posts
- Protection of establishing trees, including non-fruit-bearing fruit trees
- Termite nest eradication in trees, poles, posts and stumps
Application
Add the concentrate to water in the spray tank, mix thoroughly and keep agitating during mixing and application. The label recommends adding a marker dye so you can see even coverage. On hard-to-wet soils, a soil surfactant can improve penetration. Mixing rates, emulsion volumes and spacings are on the product label.
- Spiders: coarse, low-pressure surface spray to areas where spiders hide and rest. Use a solid stream nozzle for cracks and crevices. For best results, do both a crack and crevice treatment and an overall band spray.
- Papernest wasps: spray the nest directly until run-off. Remove the nest once all adult wasps have been knocked down.
- Ants, cockroaches, fleas, flies, mosquitoes and ticks: coarse spray to surfaces where pests rest, harbour or have been seen, without exceeding run-off. Treat ant trails and nests. Perimeter band treatments cover the soil or vegetation next to the structure and the building foundation.
- Horizontal termite barriers: low-pressure, high-volume equipment delivering large, coarse droplets, applied evenly with no gaps. Moisten very dry soil before treating.
- Vertical termite barriers: the preferred methods are trenching and treating soil as it is backfilled, or delivery through a certified reticulation system. Soil rodding is also allowed.
- Post-construction under-slab work: inject through holes drilled in the slab. The injector must not leak and must have a tip shut-off; lateral dispersion tips are recommended. Reseal drill holes after injection.
- Poles, posts and trees: soil injection or rodding around the base. Poles and posts may also be drilled and injected. To eradicate a nest, flood it with emulsion, drilling first where needed.
- Before installing a barrier, eradicate any active termites inside the structure using the methods in AS 3660.2.
- Inspect at least once a year to decide whether retreatment is needed. The barrier has a finite life, and this must be stated on the durable notice.
Safety
Signal heading: POISON. KEEP OUT OF REACH OF CHILDREN. Restricted Chemical Product: only to be supplied to, or used by, an authorised person.
- Opening the container and preparing spray: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length PVC, neoprene or nitrile gloves, face shield or goggles, and chemical-resistant footwear.
- Using prepared spray: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length PVC, neoprene or nitrile gloves, and chemical-resistant footwear.
- Enclosed areas: as above, plus a half-face respirator with a combined dust and gas cartridge.
- Hazards: poisonous if swallowed, will damage eyes and will irritate the skin. Do not inhale vapour or spray mist.
- Re-entry: keep people and pets out of treated areas until the spray has dried. Ventilate treated areas thoroughly before people move back in.
- Before spraying, remove animals and pets, and cover or remove food and water containers, fish ponds and aquariums.
- Dangerous to fish and aquatic organisms. Do not contaminate dams, waterways or drains.
- First aid: Poisons Information Centre 13 11 26.
FAQ
- Who can buy and use this product? It is a Restricted Chemical Product, so it can only be supplied to, or used by, an authorised person. The pest control operator must be licensed under state legislation, and must tell site supervisors and workers about PPE and re-entry requirements before the moisture membrane is laid over treated soil.
- Does it work with reticulation systems and physical barriers? Yes. It can be used through certified reticulation systems for perimeter and service penetration barriers and for cavity infill and footing barriers. Systems must be installed to the manufacturer's specifications and AS 3660. Where a reticulated perimeter is installed at pre-construction, the label recommends a full under-slab horizontal barrier as well. Combined physical and chemical systems are allowed if each certified system is installed to its own specification and AS 3660.
- What are its main limitations? Termite uses do not apply in Tasmania. General pest uses on the label cover external areas and surrounds only. Do not treat mature trees or fruit-bearing trees, and do not use in cavity walls except through certified cavity infill reticulation or direct nest treatment. Do not apply to excessively wet soil or straight after heavy rain. Do not use below label rates. The paralysis tick is not controlled. As a Group 3A insecticide, repeated use can select for resistant insects. 'Low Odour' does not mean odourless: the product contains liquid hydrocarbon solvents, and the safety data sheet (SDS) describes a mild aromatic hydrocarbon odour, so ventilation and enclosed-area PPE still apply.
Pack Size
How to order: order COUNTRY Bifenthrin 100 Low Odour 5 L using Garrards product code COUNT/BIFL/5.
- 5 L





