Termiticides

COUNTRY BIFENTHRIN 100 LOW ODOUR 20L

Active ingredientSolvents: 533 g/L liquid hydrocarbons

Code COUNT/BIFL/20

Downloads

Product details

Formulation

A solvent-based liquid concentrate. It forms an emulsion when you mix it with water in the spray tank.

  • Insecticide group: Group 3A (synthetic pyrethroid)
  • Poisons schedule: Schedule 6 (S6), signal heading POISON
  • Restricted Chemical Product: only to be supplied to, or used by, an authorised person

Overview

COUNTRY Bifenthrin 100 Low Odour Termiticide & Insecticide is a 100 g/L bifenthrin concentrate for Pest Management Professionals. It protects structures from subterranean termite damage and controls termites and a range of other urban pests.

For termite management, it creates a continuous horizontal and vertical chemical soil barrier between the building and the termite colony, applied in line with the AS 3660 Series. The barrier stops termites entering the building out of sight. It suits pre-construction, perimeter and post-construction work, certified reticulation systems, poles and posts, and nest eradication.

For general pest work, the same concentrate controls spiders, papernest wasps, ants, cockroaches, mosquitoes, fleas, flies and ticks around buildings. It kills on direct contact with the spray and keeps working as pests cross treated surfaces. The product is registered with the APVMA (product number 66127, label approval 66127/53735).

Product Highlights

  • One concentrate for two jobs: you can use it for termite barriers and for general pest treatments around buildings. That means fewer products to stock in the ute.
  • Long-lasting termite protection: south of the Tropic of Capricorn (excluding Tasmania), the label lists expected protection periods of at least 10 years at the higher barrier rates. North of the Tropic, the longest period listed is 5 years. Actual life depends on termite hazard, climate, soil conditions and the rate used.
  • Works with many application methods: open wand, trenching, soil rodding, sub-slab injection, certified reticulation systems (perimeter, service penetrations, cavity infill and footing barriers), pole and post treatment, and nest flooding.

Target pests

  • Subterranean termites (all states except Tasmania)
  • Spiders
  • Papernest wasps
  • Ants
  • Cockroaches
  • Mosquitoes
  • Fleas
  • Flies
  • Ticks, adults and nymphs (excluding the paralysis tick, Ixodes holocyclus)

Where to use

Urban pests (all states): external areas and surrounds of domestic, commercial, public and industrial buildings and structures.

Subterranean termites (all states except Tasmania): domestic, public, commercial and industrial areas, in these situations:

  • Pre-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
  • Perimeter barriers for new and existing buildings
  • Post-construction barriers under slabs, and under suspended floors with less than 400 mm crawl space
  • Certified reticulation systems for perimeter and/or service penetrations
  • Certified reticulation systems for cavity infill and footing barriers
  • Service poles, fence posts and establishing trees (not on fruit-bearing trees)
  • Termite nest eradication
  • Do not use in cavity walls, except through certified cavity infill reticulation systems or direct treatment of a nest
  • Do not treat mature trees. A complete barrier around all roots isn't possible, and the product is non-systemic.

Application

Add the concentrate to water in the spray tank, mix thoroughly and keep agitating while you mix and apply. Follow the label for all rates, volumes and spacings.

  • Termite barriers: use low-pressure, high-volume equipment with large, coarse droplets to minimise drift. Form a continuous, gap-free horizontal and vertical barrier in line with the AS 3660 Series.
  • Vertical barriers: trench and treat the soil as it is backfilled, deliver through a certified reticulation system, or use soil rodding. Rod spacing depends on soil type.
  • Under existing slabs: drill the slab, inject the emulsion and reseal the holes. Use leak-free equipment with tip shut-off. Lateral dispersion tips are recommended.
  • Reticulation: use only a certified system that is installed to the manufacturer's specifications and can distribute the emulsion according to the label and AS 3660.
  • A marker dye is recommended for even coverage. On hard-to-wet soils, a soil surfactant can improve penetration (both at label rates).
  • Do not apply to excessively wet soil or straight after heavy rain. If the soil surface is very dry, moisten it first.
  • Eradicate any active termites inside the structure (AS 3660.2 Section 5) before installing a barrier.
  • Spiders: use a two-part treatment. Treat cracks and crevices with a solid-stream nozzle, then apply a coarse, low-pressure band spray to surfaces where spiders shelter.
  • Papernest wasps: spray directly onto the nest to the point of run-off. Remove the nest once all adult wasps are knocked down.
  • Ants, cockroaches, fleas, flies, mosquitoes and ticks: coarse spray to resting, harbourage and congregation areas, ant trails and nests, plus perimeter bands of soil or vegetation. Do not exceed the point of run-off.
  • The barrier has a finite life. You must record this, along with the recommendation for annual inspections, on the durable notice required by the BCA.

Safety

POISON. Schedule 6 (S6). Keep out of reach of children. Read the safety directions before opening or using. Poisonous if swallowed. Will damage eyes and will irritate the skin.

  • Opening the container and preparing spray: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length PVC, neoprene or nitrile gloves, face shield or goggles, and chemical-resistant footwear
  • Using prepared spray: the same PPE without the face shield or goggles
  • Enclosed areas: add a half-face respirator with a combined dust and gas cartridge
  • Re-entry: keep people and pets out of treated areas until the spray has dried
  • Dangerous to fish and aquatic organisms. Remove pets, and cover or remove food, water containers, fish ponds and aquariums before spraying.
  • First aid: Poisons Information Centre 13 11 26
  • The container is drumMUSTER eligible

FAQ

  • Who can buy and use this product? It is a Restricted Chemical Product, so it can only be supplied to, or used by, an authorised person. Pest Management Professionals must be licensed under state legislation, and you may need to confirm your licence details when ordering.
  • Can I use it indoors or in Tasmania? The urban pest uses are approved only for external areas and surrounds of buildings. Indoor use is limited to termite treatments such as sub-slab injection. Termite uses are not approved in Tasmania. Do not use it in cavity walls except through certified cavity infill reticulation or direct nest treatment.
  • Is it compatible with reticulation systems, physical barriers and spray additives? Yes, it can be used through certified reticulation systems that meet the label and AS 3660. You can combine it with physical barriers if each certified system is installed to its own specification and AS 3660. The label recommends a marker dye, and a soil surfactant on hard-to-wet soils, both at label rates. Termites can occasionally bridge barriers, so inspect at least once a year (AS 4349.3).

Pack Size

Available in a 20 L container.

  • How to order: use Garrards product code COUNT/BIFL/20