ULV/Fog Formulations

20L GARRARDS THERMAL CARRIER II

Active ingredientPolyethylene glycol: 100%

Code THERM/CARR

Downloads

Product details

Formulation

A fogging mist carrier concentrate that is diluted with water before use. Because it contains no pesticide active, it has no insecticide mode-of-action group.

  • Type: fogging mist carrier concentrate, diluted with water
  • Base: polyethylene glycol
  • Signal heading: CAUTION

Overview

Garrards Thermal Carrier II is a fogging mist formulation for applying wettable powders and liquid chemical control agents, including flowables, through thermal fog and thermal mist applicators.

It lets Pest Management Professionals use disinfectants, germicides and pesticides as a fog or mist. You mix the chosen product into Thermal Carrier II, dilute it with water, and run it through the machine.

Thermal Carrier II does not control pests or microbes by itself. All control comes from the chemical mixed into it, so always follow that product's label as well as this one.

Product Highlights

  • Carries wettable powders and liquids: suits wettable powders as well as liquid concentrates and flowables, so one carrier covers several formulation types.
  • Works with more than pesticides: the label covers disinfectants and germicides too, so the same carrier can be used for pest jobs and hygiene jobs.
  • Adjustable fog density: the label gives separate dilution guidance for thermal mist machines and thermal fog machines. The amount of water you add controls how dense the fog is.

Target pests

Thermal Carrier II does not control any pests by itself. The target pests are the ones listed on the label of the chemical control agent mixed into it.

Where to use

The use situations are the ones approved on the label of the chemical mixed into Thermal Carrier II. The mixing instructions are based on floor area treated.

Application

Apply with thermal fog or thermal mist applicators. Rates and dilution ratios are on the product label.

  • Premix Thermal Carrier II at the dilution you need and mix well before use.
  • Work out how much chemical control agent you need for the floor area from that product's label, then add it to the diluted Thermal Carrier II.
  • Always dilute with water. Thermal mist machines and thermal fog machines need different dilutions. Follow the label for each.
  • Choose the final dilution based on how dense you want the fog to be.

Safety

Signal heading: CAUTION. Keep out of reach of children. Read the safety directions before opening or using.

Follow the safety directions and PPE requirements on the label of the chemical you mix in, and check the Thermal Carrier II Safety Data Sheet (SDS) for more information.

First aid advice is on the label. Call the Poisons Information Centre on 13 11 26 or see a doctor. In a transport emergency, dial 000 for police or the fire brigade.

FAQ

  • Will Thermal Carrier II control pests on its own? No. It contains only polyethylene glycol and no pesticide or disinfectant active. It has to be mixed with a chemical control agent, which does the controlling.
  • Which machines can I use it in? Thermal fog and thermal mist applicators. The label gives different water dilutions for each type, so check which type you have before mixing. Do not use it undiluted.
  • Can I mix any chemical into it? The label covers wettable powders and liquid chemical control agents, including flowables, such as disinfectants, germicides and pesticides. Before mixing, check that the other product's label allows it to be applied with thermal fog or mist equipment, and follow that label's rates, use situations and safety directions.

Pack Size

Available in a 20 L pack.

  • Pack size: 20 L
  • How to order: use Garrards product code THERM/CARR