Product details
Formulation
Dustable powder (DP) made with a mineral-based carrier. It is ready to use, so you don't mix or dilute it.
Insecticide mode of action Group 2B (phenylpyrazole). Fipronil blocks the GABA-A gated chloride channels in the insect's central nervous system. It acts by contact or ingestion.
Overview
Fipforce Dust Termiticide & Insecticide is a lightweight fipronil dust made by Sherwood Chemicals for Pest Management Professionals. It is used to control subterranean termites, nuisance ants and cockroaches. You apply it straight into termite nests, workings and voids with a hand duster or puffer.
Termites and ants can't detect the fipronil particles, so they don't avoid treated areas. Fipronil also acts slowly, so contaminated insects keep moving through the colony and spread the dust to others through social contact and grooming. This leads to more insects dying across the colony than a fast-knockdown dust would achieve.
Termite dusting is for eliminating active termites. It does not protect a structure on its own. After activity stops, follow up with a continuous chemical soil treatment that meets Australian Standard AS 3660.2.
- APVMA registered. The manufacturer technical sheet lists Approval No. 69558/110920.
- Termite uses are approved in all states except Tasmania.
Product Highlights
- Non-repellent, slow-acting transfer effect: termites and ants don't avoid the dust and carry it back to nest mates. This is why one well-placed dusting can affect the whole colony, not just the insects it touches.
- Mineral-based carrier instead of cellulose: it flows easily and is less affected by moisture than cellulose dusts. That means less clumping and fewer blocked dusters in humid wall voids and nests.
- Small 5 g vials: each vial is a sealed, portioned amount for a single job. This suits occasional termite work and cuts waste from half-used containers. Sherwood's trial data reports the dust is still effective at 90 days after application.
Target pests
- Subterranean termites, including Coptotermes spp.
- Nuisance ants
- Cockroaches
Where to use
- Termite nests in trees, stumps, posts, power poles, timber bridges and wharves
- Termite mounds
- Wall cavities
- Domestic, industrial and institutional premises (cockroaches)
- Food preparation and storage areas (cockroaches)
Application
Inspect thoroughly before you apply. For termite nests, find the nest, drill several holes into it and dust through the holes with a hand puffer or a powered equivalent. For cockroaches, apply with a hand duster.
After treatment, check the nest every week. Reapply if nest temperature or activity doesn't drop within the timeframe on the label. Follow the label's Directions for Use and Critical Comments for rates and intervals.
- Equipment: hand duster, hand puffer or powered duster
- Dusting termites is not a standalone treatment. Once termite activity in the structure has stopped, apply a continuous chemical soil treatment (such as Fipforce Aqua) according to AS 3660.2.
- Do not burn empty containers or product.
Safety
Signal heading: CAUTION. May irritate the eyes, nose and throat. Repeated exposure may cause allergic disorders. Avoid contact with eyes and do not breathe in the dust.
- When opening the container and applying, wear cotton overalls buttoned to the neck and wrist (or equivalent clothing), plus the extra PPE listed in the label's Safety Directions.
- The SDS recommends safety glasses or dust-proof goggles and chemical-resistant gloves. Avoid creating dust.
- Toxic to aquatic life with long-lasting effects. Don't let it get into drains or waterways, and collect any spills.
- Read the label and SDS before use.
FAQ
- Can Fipforce Dust be my only termite treatment? No. Stopping termite activity doesn't protect a structure from other colonies in the area. After you have eliminated the termites, apply a continuous chemical soil treatment according to AS 3660.2.
- Can I use it on termites anywhere in Australia? The termite uses are approved in all states except Tasmania. Check that your job falls within the use situations on the label before you apply.
- Why use a dust rather than a bait or foam? Sherwood reports that dusting gives a faster result than baiting and disturbs the site less than foaming. The non-repellent fipronil means termites carry the dust into the colony instead of walling off treated areas. The mineral carrier works in standard hand puffers and powered dusters.
Pack Size
2 x 5 g vials (10 g net).
- How to order: use Garrards product code FIPFORCE/10G





