Product details
Formulation
A dry flowable dust supplied in 3 g cartridges for use in the Precision Delivery System (PDS) applicator. Group 2B insecticide.
Overview
Taurus Dry Termiticide is a fipronil dust for spot treating subterranean termites and nuisance ants where they are active. It comes in 3 g cartridges that screw into the battery-powered Precision Delivery System (PDS). The PDS delivers measured amounts through an application straw into nests, galleries, wall cavities, cracks and voids.
It solves a common problem for Pest Management Professionals: getting the active onto termites inside timber, trees, poles and wall cavities without flooding the area with liquid. The dose is set by how long the trigger is held, so each treatment point gets a controlled amount and less product is wasted.
Taurus Dry kills the termites present at the time of treatment and is used alongside a post-construction termiticide treatment. It is not a stand-alone structural barrier. It is registered with the APVMA (Approval No. 92995/137567) and may only be used by licensed Pest Management Professionals.
Product Highlights
- Measured dosing with the PDS: The dose is set by trigger time, so you can apply a small amount at each point or hold the trigger for a steady flow into larger voids. You can track exactly how much product you use on each job.
- Termites and ants on one label: The label covers termite nests and active workings as well as nuisance ants inside and outside, including electrical areas, wall cavities and other voids. Because it is a dry dust, no water or moisture goes into the structure.
- Spreads beyond the ants you treat: Ants carry the product back to the nest, and treated ants also affect untreated ants that touch them. The product also kills insects that walk over it, so it reaches termites and ants hidden in places you cannot get to.
Target pests
- Subterranean termites, including Coptotermes sp., Schedorhinotermes spp., Nasutitermes spp. and Mastotermes spp.
- Nuisance ants
Where to use
- Termite nests in trees, stumps, posts, power poles, timber bridges and wharves, mounds and wall cavities
- Termite activity where the nest cannot be found, e.g. active workings in timber, bait boxes and bait stations
- Nuisance ants outside: areas of premises and surrounding structures such as retaining walls, fences and garden beds
- Nuisance ants inside: cracks and crevices where ants nest or gather, such as electrical areas, wall cavities and other voids
- Do not apply directly to food, utensils, food packaging, or food contact or handling surfaces
- Do not use in areas accessible to children
Application
Apply with the Precision Delivery System (PDS), which runs on a 9V battery. Always fit an application straw before use. The amount dispensed depends on how long the trigger is held. Check the label for rates, re-treatment intervals and monitoring instructions.
- Setup: Fit the battery. Keep the cartridge upright and screw it firmly into the underside of the PDS without over-tightening. Insert the application straw, switch the unit on, then put the straw into the crack, crevice or void and hold the trigger.
- Termite nests: Drill several holes into the nest and apply through the straw. Seal holes in trees with a suitable caulking compound. Check nest activity weekly afterwards.
- Active workings (nest not found): Apply directly onto as many termites as possible while disturbing them as little as you can. Do not heap the dust. Work through small entry points, focus on infested timber and wall cavities, and seal treatment holes with tape. Bait boxes and bait stations can help bring more termites together for treatment.
- Mud shelter tubes: Avoid damaging tubes that connect the outside nest to the inside workings. Only treat tubes as a last resort.
- Nuisance ants: Lightly cover as many ants as possible at nest entrances, in cracks and crevices and in other known hiding places. Seal the treated area with caulking or tape. Clean up any product outside the treated areas straight away.
- After treatment: Once termite activity has been eliminated, apply a continuous chemical soil treatment to Australian Standard 3660.2. Inspect at least once a year.
Safety
Signal heading: CAUTION. Keep out of reach of children. Only licensed Pest Management Professionals may use this product.
- When opening and using: wear cotton overalls buttoned to the neck and wrist (or equivalent clothing), elbow-length PVC gloves, goggles and a disposable dust mask
- May irritate the eyes, nose and throat. Repeated exposure may cause allergic disorders. Do not breathe in the dust and avoid eye contact
- Wash hands after use. Wash gloves and contaminated clothing after each day's use
- First aid: contact a doctor or the Poisons Information Centre on 13 11 26
- Do not contaminate streams, rivers or watercourses with the chemical or used containers
- Store in the closed original container in a dry, cool, well-ventilated place out of direct sunlight. Do not burn empty containers or product
FAQ
- Can Taurus Dry be the only treatment for an active structural termite infestation? No. It is a spot treatment that kills the workers and winged reproductives present when you treat, and it supplements post-construction treatment. Stopping activity does not protect the structure from other colonies. Apply a continuous chemical soil treatment (e.g. Warden 100 SC) to AS 3660.2 once activity is eliminated, and inspect at least once a year.
- Does this pack include the applicator? No. This pack contains four 3 g cartridges (12 g total), which only work with the Precision Delivery System (PDS). The PDS Application Gun is sold separately, needs a 9V battery and must always be used with an application straw. Any product left in a cartridge can be tapped into a new cartridge.
- Can I use it for ants in electrical areas and wall voids, and will it give long-term ant protection? Yes, you can use it inside in cracks, crevices, electrical areas, wall cavities and other voids. It works on ants present at treatment and on ants that contact treated ants, and it can take several days to work. For longer protection against new ant invasions, the label recommends an outside application of a residual liquid such as Warden 100 SC. Do not use it in areas children can access. As a Group 2B insecticide, rotate it with other groups to manage resistance.
Pack Size
4 × 3 g cartridges (12 g net)
How to order: Garrards product code TAURUS/DRY





