Suspension Concentrate

VENOM 5L PROFESSIONAL 240SC INSECTICIDE

Active ingredient240 g/L bifenthrin

Code VENOM

Downloads

Product details

Formulation

  • Formulation type: suspension concentrate (SC). Mix it with water before use.
  • Mode of action: Group 3A insecticide (bifenthrin, a synthetic pyrethroid)
  • Poisons schedule: Schedule 6 (S6). The label signal heading is POISON.
  • Transport: dangerous goods Class 6.1 (toxic substances), UN 2902

Overview

Venom Professional 240SC is a bifenthrin insecticide and termiticide that you mix with water. It is registered with the APVMA (approval 84018/117677). It kills on contact and keeps working as a residual: pests that walk over treated surfaces later pick up a dose.

Pest Management Professionals can use the same concentrate for chemical soil barriers against subterranean termites, general pest work inside and outside buildings, turf pests and pests on ornamental plants.

Termite barriers must be installed under the Australian Standard AS 3660 Series. The barriers can go in before or after construction, around the perimeter, at nests, around poles and fence posts, or through certified reticulation systems. Only a Pest Control Operator licensed under state legislation may use the product.

Product Highlights

  • One concentrate for many jobs: termite barriers, general pest control, turf and ornamentals. You can carry less stock on the vehicle and in the store.
  • High-strength 240 g/L SC formulation: you use less concentrate per tank than with lower-strength bifenthrin products, so there is less handling and fewer empty containers to dispose of. The manufacturer also describes it as low odour.
  • Flexible termite options: you can apply it by trenching, soil rodding, open wand, sub-slab injection or certified reticulation systems (perimeter, service penetrations, cavity infill and footing barriers). The label sets expected protection periods by rate and region, up to at least 10 years south of the Tropic of Capricorn.

Target pests

  • Subterranean termites (all states except Tasmania)
  • Ants (excluding red imported fire ants), including trails and nests
  • Cockroaches
  • Spiders
  • Paper nest wasps
  • Mosquitoes, biting midges and flies
  • Fleas and ticks
  • Turf ants: black ant, coastal brown ant, funnel ant, meat ant, sugar ant and stinging ant
  • Turf insects: lawn armyworm, sod webworm, adult Argentine stem weevil, adult African black beetle and adult billbug
  • Ornamental pests: two-spotted mite, aphids, mealybug (Pseudococcus longispinus) and plague thrips
  • Ornamental caterpillars and loopers: Helicoverpa spp. (corn earworm, native budworm), light brown apple moth and geranium plume moth
  • Whiteflies on ornamentals: greenhouse whitefly and poinsettia (silverleaf) whitefly (Bemisia tabaci biotype B)
  • Cutworm (Agrotis spp.) in beds, containers and pots

Where to use

  • Inside and outside, and the surrounds, of domestic, commercial, public and industrial buildings and structures
  • Under slabs and suspended floors, before or after construction, for termite barriers
  • Perimeter barriers for new and existing buildings
  • Certified reticulation systems for perimeter, service penetration, cavity infill and footing barriers
  • Service poles and fence posts, plus termite nests in trees, poles, posts and stumps
  • Turf, including lawns, commercial turf farms, parks, recreational areas, bowling greens and sports fields
  • Roses, carnations and other ornamental plants, including beds, containers and pots

Application

Add the product to water in the spray tank, mix thoroughly and keep agitating while mixing and spraying. For termite work, the label recommends a marker dye. On hard-to-wet soils, it recommends a soil surfactant.

  • General pest: apply a coarse, low-pressure spray to surfaces where pests hide, rest or harbour. Do not go past the point of run-off.
  • Crack and crevice: use a solid stream nozzle. For spiders, the label recommends two steps: crack and crevice treatment, then a band spray of surfaces.
  • Perimeter treatment: spray a band of soil or vegetation around the structure, and the building foundation.
  • Wall cavities and other concealed areas: foaming agents help the spray penetrate further.
  • Termite barriers: install continuous horizontal and vertical barriers to AS 3660. Use trenching and treating backfill, soil rodding, open wand or certified reticulation. Use low-pressure, high-volume coarse droplets to minimise drift.
  • Under existing slabs: inject through drilled holes using leak-free equipment with tip shut-off. Lateral dispersion tips are recommended. Reseal the holes afterwards.
  • Nests: locate the nest and flood it. Drill trees, poles or stumps if needed, and seal holes in live trees after injecting.
  • Turf: spray evenly after mowing, then irrigate as the label directs.
  • Ornamentals: spray to run-off, covering both sides of the leaves. In pots, cutworm can also be treated with a drench.
  • Do not apply as a space spray, by ultra-low volume (ULV) or by thermal fogging.
  • Termite barriers need at least an annual inspection. The durable notice required by the BCA must state that the barrier has a finite life and that annual inspections are recommended.

Safety

Signal heading: POISON. KEEP OUT OF REACH OF CHILDREN. READ SAFETY DIRECTIONS BEFORE OPENING OR USING. Schedule 6 poison.

  • Hazards: poisonous if swallowed. May irritate the eyes and skin, and repeated exposure may cause allergic disorders.
  • Opening the container and preparing spray: cotton overalls buttoned to the neck and wrist, a washable hat, and elbow-length PVC or nitrile gloves.
  • Spraying by hand: protective waterproof clothing, elbow-length PVC or nitrile gloves, and water-resistant footwear.
  • Termite control in buildings: cotton overalls buttoned to the neck and wrist, a washable hat, and elbow-length PVC or nitrile gloves.
  • After each day's use, wash gloves and contaminated clothing. Wash hands after use.
  • Dangerous to fish, aquatic organisms and bees. Do not spray plants in flower while bees are foraging.
  • Storage: keep in the closed original container in a cool, dry place. Do not store below 5 °C or in prolonged direct sunlight.
  • First aid: Poisons Information Centre 13 11 26

FAQ

  • Can I use it in wall cavities or through reticulation? Only through certified cavity infill reticulation systems or by treating nests directly. Any reticulation system must be certified and able to deliver the solution as required by the label and AS 3660.
  • Does it cover every termite job and every ant? No. Termite uses exclude Tasmania, and red imported fire ants are excluded. For existing poles and posts, termites may still attack from below the treated zone.
  • What can I add to the tank? The label recommends marker dyes, soil surfactants, and wetting or foaming agents to improve coverage. It does not give tank-mix compatibility with other pesticides, so check before mixing.
  • Is it suitable around pets, ponds and food areas? Yes, if you take the label precautions. Remove pets and animals first, cover or remove fish ponds and aquariums, keep the spray away from food and preparation surfaces, and do not let livestock graze treated turf.

Pack Size

How to order: quote Garrards product code VENOM.

  • 5 L container (VENOM 5L PROFESSIONAL 240SC INSECTICIDE)
  • Can be recycled through drumMUSTER once triple-rinsed, clean and dry