Suspension Concentrate

TEMPRID 1LT

Active ingredientImidacloprid 50 g/L (Group 4A, neonicotinoid) + Beta-cyfluthrin 25 g/L (Group 3A, synthetic pyrethroid) + Combined active content: 75 g/L

Code TEMP75/1

Downloads

Product details

Formulation

  • Formulation type: suspension concentrate (SC), water-based and mixed with water for spraying
  • Insecticide group: Group 3A 4A
  • Poisons schedule: Schedule 5 (signal heading CAUTION)
  • APVMA No. 64371/125306

Overview

Temprid 75 Residual Insecticide is a water-based suspension concentrate for Pest Management Professionals. It combines two actives, imidacloprid and beta-cyfluthrin, to control crawling and flying insects inside and outside domestic, commercial, industrial and public buildings. It is also registered for insect pests in turf and ornamental plants.

It is built for general pest work where you need one product for many jobs. It treats cockroach harbourages, ant trails and nests, spider webs and hiding spots, flea-infested carpets, bed bug harbourages and stored product pest areas. Outdoors, you can use it for perimeter barriers, eaves, paper wasp nests, mosquito and fly resting surfaces, and lawn insects such as armyworm, African black beetle and billbug.

Temprid 75 has two modes of action (Groups 3A and 4A), so it suits resistance management programs. Envu's HAS (Homogenised Active Solution) Technology mills both actives together to a controlled particle size so they work as one residual deposit.

Product Highlights

  • Two modes of action in one concentrate: a Group 3A pyrethroid with a Group 4A neonicotinoid. You get two chemistries in a single mix, which supports resistance management where pyrethroid-only programs are under pressure.
  • One registration covers structural, turf and ornamental work: indoor and outdoor structural pests, ticks (not paralysis ticks), lawn insects and ornamental plant pests. That means fewer products on the vehicle and simpler stock control.
  • Flexible water-based application: it can go on any surface not damaged by water alone, including void, crack-and-crevice, carpet broadcast, perimeter band and direct nest treatments. It is also label-compatible with Starycide Insect Growth Regulator and MERIT Turf and Ornamental Insecticide.

Target pests

Structural (indoor and outdoor):

  • Ants
  • Bed bugs
  • Carpet beetles
  • Clothes moths
  • Cockroaches
  • Crickets
  • Fleas
  • Millipedes (non-porous surfaces only)
  • Mosquitoes and house flies
  • Paper nest wasps
  • Silverfish
  • Skin and hide beetles
  • Spiders (web-spinning and non-web-spinning)
  • Stored product pests (beetles and moths)
  • Ticks (not paralysis ticks)
  • Turf: lawn armyworm, cutworm, webworm, adult Argentine stem weevil, adult billbug, adult scarabs including African black beetle, mole crickets, couch mite, ants, grasshoppers
  • Turf (in a mix with MERIT Turf and Ornamental Insecticide): first instar larvae of African black beetle, Argentinian scarab and Pruinose scarab; billbug larvae
  • Ornamentals: aphids, bugs (e.g. passionvine hopper, mealybug, lace bug), caterpillars, garden weevil, whiteflies, thrips
  • Ornamentals (in a mix with MERIT Turf and Ornamental Insecticide): hibiscus flower beetle, longtailed mealybug, psyllids, soft scales

Where to use

  • Internal and external areas and surrounds of domestic, commercial, industrial and public buildings, facilities and structures
  • Includes aeroplanes, barracks, factories, farm buildings, food processing establishments, hospitals, hotels and backpacker accommodation, offices, private dwellings, schools, ships, shops, storerooms and trains
  • Voids: wall, block and structural voids, under slabs and porches, rubble foundations, crawl-space soil
  • Perimeters: building exteriors, eaves, door and window frames, and adjacent soil, turf and garden beds
  • Animal houses: do not spray onto livestock or onto their food, water, litter, feed bins or any surfaces stock can reach
  • Tick control: surrounds of buildings, untended verges, surrounds of sporting venues
  • Turf and lawns
  • Ornamental plants (do not apply to edible plants)

Application

Always follow the label for dilution rates, volumes and pest-specific directions.

  • Mixing: start with a clean sprayer half-filled with water, add the measured product, top up with water and agitate.
  • Structural: apply as a coarse directed spray with a hand or mechanical sprayer, stopping before run-off.
  • Nozzles: flat fan for surfaces; pin-stream nozzle or crack-and-crevice extension for cracks and crevices; fine mist in wall voids and enclosed cavities to avoid run-off.
  • Carpets and rugs: broadcast spray in overlapping bands. Test a small, inconspicuous area first to check for water staining.
  • Wet areas: treat only cracks, crevices and harbourages that routine cleaning does not reach.
  • Bed bugs: treat bed frames, walls, cracks, crevices and skirting boards, plus mattress edges and seams only. Follow the AEPMA Code of Practice for bed bugs.
  • Turf: ground-based equipment only (no aircraft), no more than three applications per year, irrigate after application as the label directs.
  • Ornamentals: foliar spray covering the undersides of leaves. Treat a few plants first to check for sensitivity.
  • For surface treatment only: do not fog or aerosolise.
  • Do not spray moving parts of machinery, electric motors or switchgear.
  • Do not spray outdoors if heavy rain is expected within 48 hours or if the area is about to be irrigated.

Safety

CAUTION – Schedule 5 poison. Keep out of reach of children. Read the safety directions before opening or using.

  • PPE when mixing and spraying: cotton overalls buttoned to the neck and wrist (or equivalent clothing) and elbow-length chemical-resistant gloves
  • Backpack spraying: also wear cotton overalls over normal clothing and a washable hat
  • Re-entry: keep out of treated areas until the spray has dried, unless wearing cotton overalls and chemical-resistant gloves
  • May irritate the eyes and skin. Facial skin contact may cause temporary facial numbness. May cause an allergic skin reaction. Harmful if swallowed.
  • Dangerous to bees: do not spray plants in flower while bees are foraging
  • Very toxic to aquatic life: cover fish tanks and do not contaminate wetlands or watercourses
  • Do not spray exposed food, food utensils or food preparation areas, or people, clothing, bed linen, pets or pet bedding. Do not use in cots where infants sleep.
  • Poisons Information Centre: 13 11 26

FAQ

  • Will Temprid 75 control pyrethroid-resistant bed bugs? Against pyrethroid-resistant strains, control depends on direct spray contact rather than residual activity. Inspect thoroughly, spray harbourages directly, use non-chemical methods where you can't spray, and re-inspect in line with the AEPMA Code of Practice for bed bugs.
  • Can I use it in food premises and other sensitive sites? Yes. Food processing establishments, hospitals, schools and hotels are listed use situations. Do not spray exposed food, utensils, food preparation areas or food packaging, and cover or remove food before treating. In wet areas, treat only cracks, crevices and harbourages that routine cleaning does not reach. Ventilate and clean up before food processing or serving resumes.
  • What is it compatible with, and where shouldn't I use it? It is label-compatible with Starycide Insect Growth Regulator and MERIT Turf and Ornamental Insecticide. Pair it with a registered bait or gel where spraying isn't suitable. It is not compatible with IPM programs that use beneficial arthropods. It is not for fogging. Avoid timber that will later be stained, unless the owner is told about water marking. Repeated use of Group 3A or 4A products can select for resistance, so rotate your chemistry.

Pack Size

How to order

  • Pack size: 1 L
  • Garrards product code: TEMP75/1
  • Also registered in a 5 L pack