Product details
Formulation
- Formulation type: suspension concentrate (SC), water-based
- Mode of action: Group 2B insecticide (fipronil)
- Poisons schedule: Schedule 5 (signal heading CAUTION)
Overview
Fipforce HP Termiticide & Insecticide is a fipronil termiticide for Pest Management Professionals. It creates chemical soil treated zones that protect new and existing buildings and structures from subterranean termites. It is registered with the APVMA (Approval No. 63789/126108).
Fipforce HP is non-repellent. Termites can't detect the treated zone, so they enter it and pick up the active ingredient. Mortality is delayed, which means termites may stay active for several weeks after crossing the zone. Soil treatments applied according to the label protect against subterranean termites for a minimum of eight years. The actual period depends on termite pressure, climate, soil conditions and later soil disturbance.
The same pack also covers general pest work around buildings, including ants, domestic cockroaches, web-spinning spiders, houseflies and several minor pests. This means one product can handle both termite and perimeter pest jobs. Fipforce HP is for use by appropriately licensed, qualified and experienced Pest Management Professionals only.
Product Highlights
- Wider drill-and-inject spacings under concrete: the label allows hole spacings of up to 300 mm in sands and 250 mm in loams. Fewer holes means less drilling, less labour and less disruption to the slab. Sherwood reports that its polymeric surfactant SC formulation spreads the active horizontally by up to 300 mm.
- Non-repellent, with a minimum eight-year period of protection: termites can't detect the treated zone and avoid it, and the delayed effect means affected termites stay active long enough to carry the active ingredient back into the colony.
- One product for termites and general pests: the label covers soil treated zones, AS 3660-certified reticulation systems, poles and fence posts, nests in poles and trees, and wall cavity foaming. It also covers perimeter treatments for ants (including red imported fire ant and yellow crazy ant), cockroaches, spiders and houseflies.
Target pests
- Subterranean termites, including Coptotermes acinaciformis, Mastotermes darwiniensis and Schedorhinotermes spp.
- Nuisance ants: Argentine ant, black house ant, odorous house ant (Tapinoma spp.), Pharaoh's ant, white-footed ant
- Nesting ants: funnel ant, greenhead ants, meat ants, red imported fire ant, yellow crazy ant
- Domestic cockroaches: American, Australian, Oriental and smokybrown cockroaches
- Web-spinning spiders, including black house spider and redback spider
- Daddy-long-legs spiders (spot treatment only)
- Millipedes, pill bugs, house crickets and earwigs (spot treatment only)
- Houseflies
Where to use
- Pre-construction: chemical soil treated zones under and around new buildings and structures (AS 3660.1)
- Post-construction: chemical soil treated zones under and around existing buildings and structures (AS 3660.2)
- All certified reticulation systems
- Poles and fence posts in contact with soil
- Termite nests in poles and trees (not trees bearing edible fruit or nuts)
- Wall cavities where live termites are present (foam application)
- External areas and surrounds of domestic, commercial, public and industrial buildings and structures, including retaining walls, fences, garden beds and sheds
- Spot treatment of ant nests in domestic situations
- External covered areas of buildings (houseflies)
- Not for internal surfaces
Application
Follow the label, the AS 3660 series and the AEPMA Industry Code of Best Practice for Termite Management 2017. Mixing rates, volumes and drill-hole schedules are on the label.
- Mixing: half-fill the spray tank with water, add Fipforce HP, stir, then top up to volume. Make sure the equipment is clean and doesn't leak.
- Soil treated zones: combine conventional spraying and trenching. Treat the trench and the backfill to form continuous horizontal, vertical or external perimeter zones. Calibrate equipment to deliver a low-pressure, high-volume coarse spray.
- Rodding: use soil injection only where trenching and treating the backfill isn't possible or practical.
- Under slabs and paths: drill and inject with a slab injector or soil rod fitted with a multi-directional tip. Rotate the rod during application, seal the drill hole while injecting and plug holes afterwards.
- Foam: foam generating equipment can supplement liquid treatments where soil subsidence or construction practices prevent a continuous zone. It is also used for nests and wall cavities.
- Reticulation: pump the mix through an AS 3660-certified system installed to the manufacturer's specifications.
- Difficult soils: scarify, moisten dry or sandy soils, or use non-ionic wetting agents as the label directs. In heavy clay, trenching and backfilling is the preferred method.
- General pests: apply as a residual surface spray to perimeters, entry points, weep holes, cracks and crevices, or as a direct spot treatment. Apply no more than two residual general pest applications per year.
- Restraints: don't apply to excessively wet soils or during or immediately after heavy rain. Don't apply if heavy rain is expected within 48 hours or where surface water is present.
- Inspect at least once a year. Re-treat any treated zone that has been disturbed.
Safety
Signal heading: CAUTION. Poisons schedule: Schedule 5. Keep out of reach of children. The product will irritate the eyes and skin, and repeated exposure may cause allergic disorders.
- PPE when opening the container, mixing and spraying: chemical-resistant clothing buttoned to the neck and wrist, a washable hat, a half-face respirator with a combined dust and gas cartridge, and elbow-length PVC or nitrile gloves
- Wash hands after use. After each day's use, wash gloves, contaminated clothing and the respirator.
- Re-entry: don't re-enter treated areas until the spray has dried
- Keep residents and pets out of the room being treated. Remove animals before spraying and cover or remove food, water containers, fish ponds and aquariums.
- Highly toxic to fish and aquatic organisms, and dangerous to bees. Keep runoff out of drains and waterways.
- Before applying, identify ducts, vents, plumbing, sewer lines, drains and electrical conduits, and don't puncture them. Avoid applying around edible plants.
- First aid: Poisons Information Centre 13 11 26
FAQ
- Can I tank mix Fipforce HP with other insecticides? No. The label doesn't recommend tank mixing with other insecticides because it may affect the product's behaviour and efficacy. Non-ionic wetting agents and foaming agents are acceptable where the label refers to them.
- Will drill-and-inject through concrete give a complete treated zone? Not always. The label warns that injecting under slabs can distribute termiticide unevenly. Pest Management Professionals should explain the limitations of injection to the client and recommend cutting out the concrete and backfilling trenches with treated soil (AEPMA Code section 15.4). In heavy clay, trenching and backfilling is preferred over rodding.
- Termites are still active after treatment. Has it failed? Not necessarily. Fipforce HP is non-repellent and slow-acting, so termites may live and stay active for several weeks after crossing the treated zone. Wall cavity foaming is not a stand-alone treatment. Follow it with a continuous soil treatment to AS 3660.2 once termite activity has been eliminated, and inspect at least once a year.
Pack Size
5 L
- Garrards product code: FIPFORCE/5
- How to order: add product code FIPFORCE/5 to your cart online, or quote it to your local Garrards branch. Sale is restricted to appropriately licensed Pest Management Professionals.





