HomeGuard GT is an APVMA-registered component of the FMC HomeGuard Precision Termite Management System. It is a 0.1% bifenthrin-impregnated polymer bead that is poured into cavity voids during construction, giving HomeGuard installers a practical option for perimeter cavities, conduit voids and salvage situations where the sheet products cannot be fitted.

What it is
FMC Australasia developed HomeGuard GT to complement the existing HomeGuard components (HomeGuard Blue, HomeGuard DPC and the collars and cover strips used around penetrations). Instead of a sheet or membrane, GT is a free-flowing bead containing 0.1% bifenthrin that fills a void completely, regardless of its shape. Like the rest of the HomeGuard system it forms a proactive barrier that kills and repels attacking termites.

Key features
- 0.1% bifenthrin impregnated polymer bead, poured rather than laid.
- Fully registered with the APVMA for use within the HomeGuard system.
- Designed to kill and repel termites for the life of the building; the bead does not leach or degrade over time.
- Non-scheduled formulation, making it easier to handle on site than many liquid termiticides.
- 15 kg bag, lighter than many older passive granule barrier products.
- No limit on cavity width, so it suits a wide range of construction details.
Where and when to use it
Perimeter cavity installations
Used together with a 110 mm HomeGuard Blue cover strip, HomeGuard GT can replace a HomeGuard Blue or HomeGuard DPC perimeter cavity installation. This is particularly useful when the frame has already been erected and a sheet product can no longer be installed cleanly.
Salvage and corrective work
Building sites rarely go exactly to plan. Service penetrations get moved, conduits are added and small construction gaps appear. HomeGuard GT is designed for these situations: it fills conduit voids and small gaps that would otherwise leave a break in the termite management system. FMC specialty technical officer Dugald North described it at launch as a product every installer should carry in the vehicle to deal with unexpected situations.
How it fits into the HomeGuard system
Under the National Construction Code, new buildings in termite-prone areas of Australia must have a termite management system installed, and the installer certifies that the system is complete and continuous. HomeGuard GT gives accredited installers a registered way to maintain that continuity where site conditions change, rather than improvising with an unregistered fix. It is intended for use by trained HomeGuard installers in accordance with the HomeGuard manual.
Safety and compliance
- Use only as directed on the APVMA-approved label and the HomeGuard GT manual.
- Although non-scheduled, wear the PPE listed on the label and Safety Data Sheet when handling and pouring the bead.
- Installers must hold the timber pest or pest management licence required in their state or territory and, where required, current HomeGuard accreditation.
- Record the installation on the certificate and durable notice as required by the relevant Australian Standard for termite management in new buildings.
Downloads
Available from Garrards
HomeGuard GT and the full FMC HomeGuard range are available from Garrards branches. Labels, SDS and accreditation information can be obtained from your nearest branch.
Contact your local Garrards branch
Frequently asked questions
Can HomeGuard GT replace a HomeGuard Blue perimeter installation?
Yes, when used with a 110 mm HomeGuard Blue cover strip it can replace a HomeGuard Blue or HomeGuard DPC perimeter cavity installation, which is useful when the frame is already up.
Is HomeGuard GT a scheduled poison?
No. It is a non-scheduled formulation, but it must still be used according to the APVMA label and the HomeGuard manual, with appropriate PPE.
