Altriset Termiticide 1L Pack: Smaller Jobs, Same Protection

Altriset termiticide from Syngenta is available to Australian professional pest managers in a 1L chamber pack as well as the original 2L pack. The smaller pack was introduced to make Altriset easier to measure and use on jobs that do not need a full 800L of solution, such as foaming, direct treatments and smaller chemical termite barriers.

What is Altriset?

Altriset is a non-repellent liquid termiticide used by licensed pest managers to create a treated zone in soil around and beneath structures. Because it is non-repellent, foraging termites do not detect the treated soil and avoid it; they move through it and pick up the active ingredient, which then spreads through the colony by contact and normal social behaviour. Syngenta describes Altriset as one of the most innovative termiticides on the Australian market.

Altriset 1L and 2L packs shown together with Syngenta branding
Altriset is supplied in 1L and 2L pack sizes.

Why a 1L pack?

  • Right-sized mixing. The 1L pack makes up to 400L of finished solution at the 0.05% application rate for a non-repellent chemical termite barrier.
  • Easier small doses. The chamber pack lets you measure out small quantities accurately for foaming and other direct treatment methods, reducing waste and the need to store part-used mixes.
  • Less product carried per job. Technicians doing spot treatments, nest treatments or post-construction top-ups can carry the smaller pack rather than a 2L container.
  • The 2L pack remains available. For larger perimeter or under-slab jobs that need up to 800L of solution, the 2L pack is still the practical choice.

Pack size comparison

Pack size Finished solution at 0.05% Typical use
1L Up to 400L Foaming, direct treatments, smaller barrier jobs
2L Up to 800L Full perimeter and larger barrier jobs

New Syngenta labelling

The Altriset 1L was the first Syngenta professional pest management product released with the company’s updated label design and branding. Existing stock with older labels is the same registered product; always follow the directions on the label attached to the container you are using.

Where Altriset fits in termite management in Australia

Subterranean termites, including Coptotermes species, are the main cause of timber damage in Australian buildings. Treated-soil barriers and treated zones installed to the Australian Standard for termite management (AS 3660 series) remain a core part of post-construction and pre-construction termite protection. A non-repellent termiticide such as Altriset is typically used to:

  • establish a continuous treated zone around the external perimeter of a building;
  • treat soil beneath slabs or in subfloors via trenching, rodding or drilling and injection;
  • foam into wall cavities, nests or other voids where liquid cannot be applied effectively.

Any termiticide treatment should follow a thorough inspection and be documented, with the property owner advised of ongoing inspection requirements.

Safety and compliance

  • Altriset is a registered agricultural and veterinary chemical; use it only as directed on the APVMA-approved label and Safety Data Sheet.
  • Application must be carried out by an appropriately licensed pest management technician in accordance with state or territory licensing requirements.
  • Wear the personal protective equipment specified on the label when mixing and applying, and follow label directions for storage and container disposal.
  • Termite management systems should be installed in accordance with the relevant Australian Standard and the label, and a durable notice should be fitted where required.

Training and support

Garrards representatives can arrange staff training on Altriset with Syngenta and help your business understand how the product can protect your customers, your staff and your reputation. Syngenta also produced a short video on its work with professional pest managers as part of its “Life Uninterrupted” campaign.

Available from Garrards

Altriset termiticide is available nationally from Garrards in 1L and 2L pack sizes. Contact your local branch for current pricing, availability and training options.

Contact your local Garrards branch

Frequently asked questions

How much solution does the Altriset 1L pack make?

At the 0.05% application rate for a chemical termite barrier, the 1L pack makes up to 400L of finished solution. The 2L pack makes up to 800L.

Can Altriset be used for foaming?

Yes. The 1L chamber pack was introduced partly to make it easier to measure small doses for foaming and other direct treatment methods, as directed on the label.

Is Altriset repellent to termites?

No. Altriset is a non-repellent termiticide, so termites do not detect and avoid treated soil; they move through it and pick up the active ingredient.