Garrards is an authorised dealer for Bosch Blue professional power tools, the trade range built for daily site use rather than the occasional home job. For Australian termite technicians, a reliable rotary hammer and the right drill bits are core equipment: drilling slab edges, paths and footings for chemical termite barriers is a large part of the work, and a tool that stalls or overheats slows every job.


Why Bosch Blue for pest management work
- Professional-grade tools built for repeated heavy use on concrete and masonry.
- SDS-plus toolholders for fast, keyless bit changes on site.
- Corded and 36 V cordless models for sites without power.
- Matching Bosch drill bits and accessories stocked by Garrards.
The most popular models
These are the models Garrards customers buy most often; your branch can order others.
GBH 4 Premium corded rotary hammer

The heaviest hitter of the group, suited to technicians drilling a lot of 12 to 16 mm holes through thick slabs.
- Rated power input: 900 W
- Impact energy: 0 to 5 J
- Impact rate at rated speed: 0 to 3,600 bpm
- Rated speed: 0 to 760 rpm
- Weight without cable: 4.7 kg
- Toolholder: SDS-plus
- Drilling diameter in concrete: 6 to 32 mm; masonry up to 90 mm (core); steel 13 mm; wood 32 mm
GBH 36 VF-Li cordless rotary hammer

A 36 V cordless hammer with near-corded performance for drilling where running a lead is impractical.
- Rated power input: 600 W
- Impact energy: 0 to 3 J
- Impact rate at rated speed: 0 to 4,260 bpm
- Rated speed: 0 to 960 rpm
- Weight including battery: 4.5 kg
- Toolholder: SDS-plus
- Drilling diameter in concrete with hammer bits: 4 to 26 mm; steel 13 mm; wood 30 mm
GBH 36 V-Li cordless rotary hammer

The lighter cordless option at 2.9 kg, a good fit for subfloor and overhead work where tool weight matters.
- Rated power input: 430 W
- Impact energy: 0 to 1.8 J
- Impact rate at rated speed: 0 to 4,850 bpm
- Rated speed: 0 to 1,500 rpm
- Weight including battery: 2.9 kg
- Toolholder: SDS-plus
- Drilling diameter in concrete with hammer bits: 4 to 18 mm; steel 13 mm; wood 30 mm
GOP 250 CE multi-cutter

An oscillating multi-tool for cutting and sanding in tight spaces, useful for opening up skirting, architraves and flooring during termite inspections and repairs.
- Rated power: 250 W
- No-load stroke rate: 8,000 to 20,000 spm
- Oscillation angle left/right: 1.4 degrees
- Weight: 1.3 kg
GSR 36 V-Li cordless drill driver

A high-torque drill driver that shares the 36 V battery platform with the cordless hammers, handy for fixing bait stations, ducting and covers.
- Voltage: 36 V; battery capacity 2.6 Ah; charging time approximately 45 minutes
- Weight including battery: 3.0 kg
- No-load speed: 0 to 400 rpm (1st gear) / 0 to 1,400 rpm (2nd gear)
- Torque hard/soft: 80 / 40 Nm; 25 + 1 torque settings
- Max drilling diameter: wood 50 mm, steel 16 mm
- Chuck jaw width: 1.5 to 13 mm
Safety on site
Drilling concrete produces silica dust. Australian WHS regulations require dust control by extraction or water suppression, a fitted P2 respirator, and eye and hearing protection. Check for services before drilling slabs and walls.
Available from Garrards
Bosch Blue tools, batteries, chargers and drill bits are available through Garrards branches nationally. Contact your branch for current models, pricing and availability.
Contact your local Garrards branch
Frequently asked questions
Which Bosch rotary hammer is best for termite barrier drilling?
For high-volume slab drilling the corded GBH 4 Premium delivers the most impact energy. If you work away from power, the GBH 36 VF-Li gives similar capability on a 36 V battery, and the GBH 36 V-Li is the lightest option for subfloor and overhead work.
Does Garrards stock Bosch drill bits?
Yes. Garrards stocks Bosch SDS-plus drill bits and accessories alongside the tools, and can order other items from the Bosch Blue range.
