Dräger Respirators, Filters and Kits for Pest Managers

Dräger respirators are a long-standing choice for respiratory protection in Australian pest management, where technicians mix and apply insecticides, rodenticides and termiticides in roof voids, subfloors and confined spaces. Garrards stocks the Dräger X-plore range of disposable, half face and full face respirators, ready-to-use respirator kits, gas and combination filters and the accessories needed to keep them in service. This page lists the range by product family with Garrards part numbers.

Dräger logo
Dräger respiratory protection, available from Garrards.

Choosing the right respirator for pest control work

Respiratory protection in Australia should be selected, fitted and maintained in line with AS/NZS 1715 and use equipment made to AS/NZS 1716 or an equivalent recognised standard. The product label and Safety Data Sheet (SDS) for each pesticide state the minimum respiratory protection required. As a general guide:

  • Disposable P2 masks suit dusty tasks with no vapour hazard, such as handling dry baits or working in dusty roof spaces.
  • Half face masks with combination filters are the everyday choice for mixing and spraying liquid pesticides.
  • Full face masks add eye and face protection and a better seal, and suit fumigation-adjacent work, heavy spraying and situations where a product label calls for full face protection.

Filter codes follow the international convention: A covers organic vapours (solvents), B inorganic gases, E acid gases, K ammonia, Hg mercury vapour, AX low-boiling organic compounds, and P2 or P3 particulate filters. The number after a letter (1 or 2) indicates capacity. Always match the filter to the hazard on the SDS and replace filters according to the manufacturer’s guidance.

Respirators

X-plore 1920 P2 disposable mask with valve

A disposable P2 particulate respirator with exhalation valve for dusty, low-vapour tasks. Size M/L.

Part number: DRA/3951925

Dräger X-plore 1920 P2 disposable respirator with exhalation valve
X-plore 1920 P2 disposable mask with valve.

X-plore 3500 half face mask

A modern, lightweight half mask that offers extra protection and comfort. The flexible nose area gives a secure fit, the low-profile design keeps the mask out of the line of sight, and the easily adjusted FlexiFit head harness makes it quick to put on and take off. Built for long-lasting protection under tough conditions. Sizes S, M and L.

Part numbers: DRA/R5530 (S), DRA/R55351 (M), DRA/R55352 (L)

Dräger X-plore 3500 half face respirator mask
X-plore 3500 half face mask, available in three sizes.

X-plore 4790 half face mask

Combines a soft mask body, a specially shaped nose seal and a sturdy plastic frame. In long-term use this gives a reliable fit across different face shapes and sizes, superior leak tightness and virtually no pressure points. The FlexiFit head harness allows easy removal without hair entanglement or unnecessary pressure. Uses Dräger Rd (R D) threaded filters. Sizes S/M and M/L.

Part numbers: DRA/R55878 (S/M), DRA/R55877 (M/L)

Dräger X-plore 4790 half face respirator mask with Rd filter connection
X-plore 4790 half face mask.

X-plore 6530 full face mask (EPDM)

A double sealing frame with threefold sealing edges gives safe protection and a secure fit for almost all face shapes. The durable EPDM mask body remains comfortable during prolonged use, and an efficient ventilation system with separate inner mask keeps the lens fog-free for an unobstructed view. One size.

Part number: DRA/R55795

Dräger X-plore 6530 EPDM full face respirator mask
X-plore 6530 full face mask in EPDM.

X-plore 6570 full face mask (silicone)

The same threefold sealing edge design in durable, hypoallergenic silicone for uncompromising comfort during long shifts. Features an excellent ventilation system, clear voice communication and a large field of vision. One size.

Part number: DRA/R55790

Dräger X-plore 6570 silicone full face respirator mask
X-plore 6570 full face mask in silicone.

Respirator kits

Kits bundle a mask with matched filters so a technician can be protected straight out of the box. They are a convenient way to equip new staff or standardise the PPE carried on each vehicle.

X-plore 3500 ABEK1 Hg P2/P3 kit

Half mask with combination filters covering organic vapours, inorganic gases, acid gases, ammonia, mercury vapour and particulates. Sizes M and L.

Part numbers: DRA/3504026 (M), DRA/3504031 (L)

Dräger X-plore 3500 half mask kit with ABEK1 Hg P2/P3 filters
X-plore 3500 ABEK1 Hg P2/P3 kit.

X-plore 3500 A2 P2/P3 kit

Half mask with A2 organic vapour and particulate filters, the typical combination for mixing and spraying liquid pesticides. Sizes S, M and L.

Part numbers: DRA/3504027 (S), DRA/3504032 (M), DRA/3504037 (L)

Dräger X-plore 3500 half mask kit with A2 P2/P3 filters
X-plore 3500 A2 P2/P3 kit.

X-plore 3300 P2/P3 kit

Half mask with particulate-only filters for dust hazards. Size M.

Part number: DRA/3504045

Dräger X-plore 3300 half mask kit with P2/P3 particulate filters
X-plore 3300 P2/P3 kit.

Filters

Dräger filters use one of two connections: the Rd40 standard thread (Rd, also written R D) used on the X-plore 4790, 6530 and 6570, and the bayonet fitting used on the X-plore 3300, 3500 and 5500 series. Check the connection type before ordering.

Filter Connection Suits Part number
Dräger 90 pre-filter (coarse dust) Rd X-plore 4790 DRA/6736705
Dräger 940 A2B2 gas filter Rd40 All half and full face masks with standard Rd40 connector DRA/6738779
Dräger 1140 A1B2E2K1 Hg NO CO P3 Rd filter Rd Rd masks DRA/6738801
Dräger bayonet combi filter A2B2E2K2 Hg P3 Rd Bayonet X-plore 5500 full face DRA/6738819
Dräger 940 A2 P2 combination filter Rd X-plore 6530 and 6570 DRA/6738857
Dräger 1140 AX P3 Rd combi filter Rd Rd masks DRA/6738862
Dräger 1140 AX filter Rd Rd masks DRA/6738863
Dräger A1 P2 Rd combi filter Rd X-plore 4790 DRA/6738867
Dräger bayonet combo filter A2 P3 Rd (per cartridge) Bayonet X-plore 3300 / 3000 / 5000 series DRA/6738875

Dräger 90 pre-filter to suit X-plore 4790

A coarse dust pre-filter with the Dräger-specific Rd connection, made to suit the X-plore 4790 half face mask. Fitting a pre-filter extends the life of the main gas filter in dusty roof voids and subfloors.

Dräger 90 coarse dust pre-filter for X-plore 4790
Dräger 90 pre-filter, DRA/6736705.

Dräger 940 A2B2 gas filter

Organic vapour and inorganic gas filter suitable for all half and full face masks on the market with the standard Rd40 connector.

Dräger 940 A2B2 gas filter with Rd40 thread
Dräger 940 A2B2 gas filter, DRA/6738779.

Dräger 1140 A1B2E2K1 Hg NO CO P3 Rd filter

A broad-spectrum multi-gas and particulate filter for situations where several gas types may be present.

Dräger 1140 A1B2E2K1 Hg NO CO P3 multi-gas filter
Dräger 1140 multi-gas P3 filter, DRA/6738801.

Dräger X-plore bayonet combi filter A2B2E2K2 Hg P3 Rd (X-plore 5500)

The X-plore bayonet filter series is designed for a wide range of applications and combines modern design with low breathing resistance. Because the bayonet filter sits on the side of the mask, the wearer keeps a wide, uninterrupted field of vision.

Dräger X-plore bayonet combination filters
X-plore bayonet combi filter, DRA/6738819.

Dräger 940 A2 P2 combination filter (X-plore 6530 and 6570)

An A2 P2 combination filter with the Dräger-specific Rd connection, suitable for the X-plore 6530 and 6570 full face masks.

Dräger 940 A2 P2 combination filter for X-plore 6530 and 6570 full face masks
Dräger 940 A2 P2 combination filter, DRA/6738857.

Dräger 1140 AX P3 Rd combi filter and 1140 AX filter

AX filters protect against low-boiling organic compounds. The combi version adds a P3 particulate stage.

Dräger 1140 AX P3 Rd combination filter
Dräger 1140 AX P3 Rd combi filter (DRA/6738862) and 1140 AX filter (DRA/6738863).

Dräger A1 P2 Rd combi filter (X-plore 4790)

Dräger A1 P2 Rd combination filters for X-plore 4790
Dräger A1 P2 Rd combi filter, DRA/6738867.

Dräger bayonet combo filter A2 P3 Rd (X-plore 3300)

Combined bayonet filter for the X-plore 3300, sold per cartridge. Suitable for respiratory protection against vapours and organic gases (for example solvents) with a boiling point above 65 °C, and against dusts.

Dräger bayonet A2 P3 combination filter cartridge for X-plore 3300
Dräger bayonet A2 P3 filter, DRA/6738875.

Accessories and replacement parts

  • Dräger antibacterial wipes, 100 pack – DRA/3701421
  • Dräger quick cleaning cloth, 10 pack – DRA/R54134
  • Replacement head strap for X-plore 3500 and 4790 – DRA/R55224
  • Silicone head strap harness to suit X-plore 6570 – DRA/R55852
Box of Dräger alcohol-free respirator cleaning wipes
Dräger cleaning wipes keep mask seals clean and in good condition.

Care, fit and compliance

  • Tight-fitting respirators only work when they seal. Facial hair prevents a seal, and workers should be fit tested when a mask is issued and whenever their face shape changes.
  • Clean masks after each use with approved wipes, inspect valves and straps, and store them sealed away from chemicals and sunlight.
  • Replace gas filters when vapour can be detected, on the schedule set by your workplace, or after the manufacturer’s stated life once opened. Replace particulate filters when breathing resistance rises.
  • Under state and territory work health and safety laws the employer must provide suitable PPE, train workers in its use and keep it maintained.

Frequently asked questions

Which filter do I need for spraying liquid insecticides?

Check the product SDS. Most liquid pesticide applications call for an organic vapour (A class) filter combined with a particulate filter, such as the A2 P2 or A2 P3 combinations listed above.

What is the difference between Rd and bayonet filters?

Rd (Rd40) filters screw into a central threaded port on masks such as the X-plore 4790, 6530 and 6570. Bayonet filters twist-lock onto ports on either side of the X-plore 3300, 3500 and 5500 masks. The two types are not interchangeable.

Should I choose the EPDM or silicone full face mask?

Both share the same sealing design. The silicone X-plore 6570 is hypoallergenic and generally more comfortable for long wear; the EPDM X-plore 6530 is a durable, economical alternative.

Available from Garrards

The complete Dräger range shown here is available from Garrards branches nationwide. Contact your local branch for sizing advice, current pricing and help matching filters to the products you use.

Garrards logo
Dräger respiratory protection is available from all Garrards branches.

Contact your local Garrards branch

Frequently asked questions

Which filter do I need for spraying liquid insecticides?

Check the product SDS. Most liquid pesticide applications call for an organic vapour (A class) filter combined with a particulate filter, such as the A2 P2 or A2 P3 combinations in the Dräger range.

What is the difference between Rd and bayonet filters?

Rd (Rd40) filters screw into a central threaded port on masks such as the X-plore 4790, 6530 and 6570. Bayonet filters twist-lock onto side ports on the X-plore 3300, 3500 and 5500 masks. They are not interchangeable.

Should I choose the EPDM or silicone full face mask?

Both share the same sealing design. The silicone X-plore 6570 is hypoallergenic and generally more comfortable for long wear; the EPDM X-plore 6530 is a durable, economical alternative.