HomeGuard Protectacote is a brush, roll or spray-on coating that forms a combined termite and waterproof barrier on concrete and masonry. Part of the HomeGuard Precision Termite Management System from FMC, it contains bifenthrin at 0.65 g/L and gives installers a way to protect surfaces and details that sheet and collar products cannot easily cover.

What it is
The HomeGuard system is a range of physical-chemical termite management products installed during construction. Protectacote extends the system with a liquid-applied membrane: once cured it forms a continuous coating that termites cannot penetrate without being exposed to bifenthrin, and that also acts as a waterproofing layer. Because it is applied like paint it conforms to irregular surfaces, penetrations and junctions.

Where to use it
Protectacote provides a termite and waterproof barrier on concrete and masonry in the following applications:
- Exposed slab edges
- Backfilled walls
- Construction joints
- Cavity protection
- Posts and poles
These are the points where subterranean termites most often gain concealed entry to a building: along the slab edge under paving or garden beds, through cracks and cold joints in slabs, up the outside of retaining or backfilled walls, and inside wall cavities. In Australian construction the slab edge in particular must either remain exposed for inspection or be protected by a compliant termite management system, and Protectacote gives builders a coating option for that detail.
Key features and benefits
- Termite barrier and waterproof membrane in a single product.
- Increases the termite management options available to builders and installers.
- Contains the proven active ingredient bifenthrin (0.65 g/L).
- Described by the manufacturer as safe and non-sensitising; will not irritate the applicator.
- Water clean-up of brushes, rollers and spray equipment.
- Applied by brush, roller or spray to suit the detail and the size of the job.
Certification and compliance
- Registered with the APVMA (approval numbers 80789 and 101648).
- CodeMark certified, certificate CMA-CM40156.
- Conforms to AS 3660.1:2014 Termite management, Part 1: New building work.
- Conforms to the Building Code of Australia (BCA).
CodeMark certification is a voluntary building product certification scheme administered under the Australian Building Codes Board. A CodeMark certificate of conformity must be accepted by building certifiers as evidence that the product meets the relevant requirements of the National Construction Code when installed in accordance with the certificate. That takes much of the uncertainty out of specifying and approving a termite management system for a new build.
How it fits into a termite management system
Under AS 3660.1 a termite management system for new building work is designed to deter concealed termite entry and force termites into the open, where they can be detected during regular inspections. Protectacote is typically used alongside the other HomeGuard components, for example sheet membranes under slabs and collars around service penetrations, to complete the system at slab edges, joints and walls. Installers should:
- Prepare concrete or masonry surfaces so the coating bonds properly.
- Apply Protectacote at the coverage and film thickness specified on the label and technical data sheet.
- Ensure the coating ties in with adjoining membranes, collars or physical barriers with no gaps.
- Record the installation and issue the durable notice and certificate required by the Building Code and AS 3660.1.
- Advise the owner that annual termite inspections remain necessary for the life of the building.
Safety and compliance
HomeGuard Protectacote is an APVMA-registered termiticide and must be applied in accordance with the label. In most states and territories, installation of termite management systems is restricted to appropriately licensed pest management technicians or accredited installers, and many manufacturers require installer accreditation for warranty purposes. Wear the PPE specified on the label and SDS, and keep uncured product away from waterways and stormwater drains.
Available from Garrards
Garrards supplies the HomeGuard Precision Termite Management System, including Protectacote, together with other pre-construction and post-construction termite management products through branches across Australia. Contact your local branch for pack sizes, coverage information and installer training options.
Contact your local Garrards branch
Frequently asked questions
Is HomeGuard Protectacote a physical or chemical termite barrier?
It is a liquid-applied coating that forms a continuous membrane and contains the termiticide bifenthrin, so it combines a physical and chemical mode of action in a single termite and waterproof barrier.
Can Protectacote be used on an existing home?
The listed applications are exposed slab edges, backfilled walls, construction joints, cavities, posts and poles under AS 3660.1 (new building work). Check the label and the CodeMark certificate for the approved scope of use.
Who can install HomeGuard Protectacote?
Installation is generally restricted to licensed pest management technicians or accredited installers, and manufacturer accreditation is usually required for warranty purposes. Contact Garrards for training options.
