Projahn Drill Bits for Termite Work: SDS Plus, SDS Max, Auger

Projahn drill bits are precision masonry and auger bits made in Germany and distributed in Australia by Garrards. Drill bits from different brands may look and feel the same, but they are not made the same, and for termite technicians who drill dozens of holes a day through slabs, paths and brickwork, bit quality has a direct effect on job time, hole quality and running costs.

Why bit quality matters for termite work

Post-construction termite treatments in Australia routinely involve drilling through concrete slabs, paving, brick and masonry to inject termiticide beneath and around a building. A typical technician carries a large kit of bits, which are sharp, awkward to store and heavy in quantity. Projahn bits are designed to reduce those problems:

  • Longer bit life means fewer bits carried and fewer replacements bought.
  • Less time changing bits on site, so more holes drilled per hour.
  • Cleaner, tidier holes, which makes plugging and finishing easier and leaves a better result for the customer.
Projahn masonry drill bits with SDS Plus shanks
Projahn SDS Plus masonry bits.

Shank types

Projahn bits are supplied with the shank to suit the tool and the job:

  • SDS Plus – the standard fitting for light and medium rotary hammers, used for most termite drilling in slabs and brickwork.
  • SDS Max – for heavy-duty rotary hammers and larger, deeper holes.
  • Straight shank – for conventional keyed or keyless chucks.
  • Hex shank – for quick-change drivers and augers.

Cutting head types

  • Quad head (four-cutter) masonry bits cut faster and stay straighter in reinforced concrete and aggregate, and are less likely to jam on steel reinforcement.
  • Two-cutter masonry bits for general concrete and masonry drilling.
  • Auger bits (including Lewis-type) for boring timber, such as bearers, joists and stumps in subfloor treatments.
  • K-taper bits for taper-fit applications.
Projahn auger and masonry drill bit range
Projahn auger and masonry bits stocked by Garrards.

Projahn bits stocked by Garrards

Part number Size Type
PRO/6X260 6 mm x 260 mm SDS Plus quad head
PRO/6X310 6 mm x 310 mm SDS Plus quad head
PRO/6.5X450 6.5 mm x 450 mm SDS Plus 2 cutter
PRO/8X260 8 mm x 260 mm SDS Plus quad head
PRO/8X460 8 mm x 460 mm SDS Plus quad head
PRO/10X310 10 mm x 310 mm SDS Plus quad head
PRO/10X450 10 mm x 450 mm SDS Plus quad head
PRO/10X600 10 mm x 600 mm SDS Plus quad head
PRO/12X260 12 mm x 260 mm SDS quad head
PRO/12X450 12 mm x 450 mm SDS Plus quad head
PRO/12X540M 12 mm x 540 mm SDS Max
PRO/12X600 12 mm x 600 mm SDS Plus quad head
PRO/13X450 13 mm x 450 mm SDS Plus standard drill bit
PRO/14X450 14 mm x 450 mm SDS Plus 2 cutter
PRO/AUG12X460SDS 12 mm x 460 mm Auger bit with SDS shank
PRO/AUG12X600 12 mm x 600 mm Auger bit
PRO/AUG14X460 14 mm x 460 mm Auger bit (Lewis type)
PRO/AUG16X600 16 mm x 600 mm Auger bit (Lewis type)
PRO/KT12X400 12 mm x 400 mm K-taper drill bit

Choosing the right bit for termite drilling

  • Match the diameter to your injection rod or nozzle and the plug size you use to seal holes.
  • Choose a working length that clears the slab thickness or wall footing with room to spare; 450 mm and 600 mm bits suit deeper edge-beam and footing work.
  • Use quad-head bits where reinforcing mesh is likely, and keep a two-cutter bit as a backup.
  • Let the hammer do the work; excessive pressure overheats the carbide tip and shortens bit life.

Safety

Drilling masonry produces silica dust. Use dust extraction or water suppression where practical, wear a fitted P2 respirator, eye and hearing protection, and check for services (cables, water, gas) before drilling in slabs or walls, in line with your state or territory work health and safety requirements.

Available from Garrards

The Projahn range of masonry and auger bits is stocked at Garrards branches across Australia. Contact your local branch for current sizes and pricing.

Contact your local Garrards branch

Frequently asked questions

What is the difference between SDS Plus and SDS Max?

SDS Plus is the standard shank for light and medium rotary hammers and covers most termite drilling. SDS Max is a larger shank for heavy-duty hammers and bigger, deeper holes.

Why choose a quad-head masonry bit?

Four cutting edges drill faster, run straighter and cope better with aggregate and steel reinforcement than a two-cutter bit.

Which Projahn bits are suitable for timber?

The auger bits, including the Lewis-type augers, are designed for boring timber such as bearers, joists and stumps.