In March 2013 the APVMA finalised the next stage of its dichlorvos review and issued two permits – PER14075 and PER14076 – that replaced all previously registered dichlorvos labels. From 1 March 2013 the permits alone governed how dichlorvos products could be supplied and used in Australia, and they introduced strict conditions for suppliers, users and re-entry that every pest manager handling dichlorvos needed to follow.


Background: the APVMA dichlorvos review
Dichlorvos is an organophosphate insecticide that was widely used as a space spray and fumigant. Following the APVMA review, dichlorvos labels had to be amended to reflect new restrictions. Most manufacturers chose to cancel their registrations rather than relabel – Country Dichlorvos among them – while a few kept registrations current. Suspended products were given a two-year phase-out period from 1 March 2011 so that existing stock could be sold.
When that phase-out ended, the APVMA published a special Gazette with an effective date of 1 March 2013. All previously registered labels were suspended and only the permits applied. Importantly, the permits were valid in certain states only: where a permit was not in force in a state, dichlorvos could no longer be used or sold there.
What the permits required
Supply conditions (both permits)
At the time of supply, every supplier had to give the person taking responsibility for the product:
- a full copy of the relevant permit (PER14075 or PER14076) setting out the conditions and instructions for use; and
- the product with a copy of the permit instructions securely affixed to each container.
PER14075 – 1140 g/L and 500 g/L products
This permit covered only the specific 1140 g/L and 500 g/L dichlorvos products listed on the permit. Use was restricted to European wasp treatments and grain-handling situations – no general pest or other use situations.
- Grain protection: product had to be supplied in a container that only allowed use through a drum valve/dry-break coupler closed delivery (mixing and loading) system.
- Worker exposure limits: no worker mixing or loading dichlorvos EC formulations for grain protection could handle more than 23 kg of dichlorvos per day, or be involved in mixing and loading for more than 30 days per year.
- Re-entry: no entry to a treated area for ten hours after treatment. Earlier re-entry required chemical-resistant clothing, gloves and a half-facepiece respirator.
PER14076 – Insectigas only
The second permit applied solely to Insectigas, a product Garrards no longer sold at the time, but its conditions are worth knowing:
- No hand-held spraying – Insectigas could only be used through systems with pre-programmed time release.
- No spraying into air spaces.
- Premises had to be ventilated for 30 minutes before re-entry.
- No re-entry to treated facilities (other than glasshouses and similar plant-production facilities) within four days of fumigation.
- Placarding on all doors to treated areas.
- Re-entry within four days required elbow-length PVC gloves, chemical-resistant full-body clothing and a full-facepiece respirator with combined dust cartridge (canister).
The read-and-confirm requirement
A condition common to both permits: anyone wishing to use the listed dichlorvos products had to read, or have read to them, the instructions in Attachment 1 of the permit. Users who had the instructions read to them had to confirm to the reader that they understood them. Failure to comply with a permit could attract a penalty of $33,000 at the time.
What it meant for Australian pest managers
- Check that a permit was in force in your state before selling or using any dichlorvos product.
- Confirm the specific product was listed on the permit – the permits did not cover dichlorvos generally.
- Use only for the permitted situations (European wasps, grain handling) and follow the re-entry and PPE conditions exactly.
- Keep a copy of the permit with the product and record that users had read and understood the instructions.
- Consider registered alternatives for general pest work, since dichlorvos was no longer available for those uses.
Organophosphates such as dichlorvos are Schedule 6 or 7 poisons under the Australian Poisons Standard, and their supply and use also fall under state and territory pesticide regulations and the WHS hazardous-chemicals framework administered through Safe Work Australia. APVMA permits carry expiry dates and can be varied or withdrawn, so always check the current APVMA permit database rather than relying on a historical notice.
Downloads
- APVMA permit PER14075 – dichlorvos 1140 g/L and 500 g/L products (PDF)
- APVMA permit PER14076 – Insectigas (PDF)
Contact
For the current registration or permit status of any dichlorvos product, and for registered alternatives for wasp and stored-product work, contact your nearest Garrards branch.
Available from Garrards
Garrards branches can confirm what is currently registered or permitted in your state and supply the label, SDS and permit documents you need to stay compliant.
