The Netfixx Superclip is a stainless steel bird netting clip designed to speed up the installation of bird exclusion netting. It is fitted with a hammer, grips firmly once driven home, and carries integrated loops that hold the perimeter wire rope tight against the beam so the net edge sits where it should.

What it is
Bird netting systems rely on a tensioned wire rope running around the perimeter of the net, and that rope must be anchored at regular intervals to the structure. The Netfixx Superclip is a purpose-made anchor for timber or similar beams. Rather than drilling and fixing an eye bolt or screw, the installer drives the clip in with a hammer and threads the wire rope through its loops.

Key features
- Stainless steel construction for long service life outdoors, where galvanised fittings can corrode and stain the structure.
- Hammer installation with no drilling, plugs or screws, which cuts fixing time on large jobs.
- Strong bite so the clip holds firmly under net tension and wind load.
- Integrated loops that keep the wire rope close to the beam and running along it, giving a neat, low-profile finish.
Applications and sizes
The Superclip is intended for fixing wire rope along beams as part of a bird netting installation – for example under awnings, in loading docks, car parks, warehouse roof structures and other areas where pigeons and other pest birds roost. The available sizes and their applications are shown below.

Where it fits in a bird management program
Exclusion netting is one of the most effective long-term bird control measures available to Australian pest managers because it physically denies birds access to the roosting or nesting site. Its success depends on the net being correctly tensioned and fully sealed at the edges; gaps at the perimeter are where birds get in. Reliable anchoring hardware such as the Superclip is what keeps the perimeter rope tight over the life of the installation. Garrards stocks a wide range of other netting clips, fixings and attachment accessories to suit different substrates.
Installation notes
- Check that the beam material and condition will accept and hold the clip before fixing.
- Space clips consistently so the wire rope stays straight and evenly tensioned.
- Work at heights in accordance with Safe Work Australia guidance and your state’s work health and safety requirements.
- Remove existing nesting material and droppings before netting, using appropriate PPE, as accumulated bird waste can carry disease.
Available from Garrards
The Netfixx Superclip and Garrards’ full range of bird netting, spikes, wire and fixing hardware are available from your local branch. Ask our staff for a copy of the Garrards bird management catalogue or for help specifying hardware for your next bird control job.
Contact your local Garrards branch
Frequently asked questions
What is the Netfixx Superclip used for?
It anchors the perimeter wire rope of a bird exclusion net to beams. The clip is driven in with a hammer and the rope is threaded through its loops, keeping the cable tight along the beam.
Why stainless steel?
Netting hardware is usually installed outdoors and left in place for years. Stainless steel resists corrosion, so the clip keeps its holding strength and does not stain the structure.
