GFS fuel cells, pins and gas-actuated concrete nailers give Australian pest managers a lower-cost way to fix termite management systems and other components to concrete. The GFS range was designed to work in GFS, Ramset and Powers gas nailers, so you can keep using the tool you already own and simply swap in GFS consumables.


What is the GFS range?
GFS is a range of concrete fastening consumables and tools distributed in Australia by Garrards. It covers three things a pest technician needs when pinning material to a slab or footing:
- Fuel cells – the gas cartridge that drives a gas-actuated nailer. Two series are available (1000 Series and 700 Series) to suit different tools.
- 19mm pins – supplied in packs of 1,000 pins with one fuel cell, so each pack is a complete consumable kit.
- GFS1000 concrete gas nailer – a stand-alone tool for technicians who do not already own a Ramset or Powers gun.
The GFS pins and fuel cells were designed for use in GFS, Ramset and Powers gas-actuated nail guns. According to the manufacturer, the only practical difference between GFS consumables and the branded originals is the price.
Where pest managers use gas nailers
Gas-actuated concrete nailers are a standard installation tool for physical termite management systems. Sheet and collar products such as HomeGuard are pinned to slab edges, penetrations and construction joints, and a gas nailer lets one technician fix long runs quickly without drilling and plugging every fastener. Typical Australian applications include:
- fixing termite barrier sheeting or flashing to slab edges and rebates on new builds
- securing collars and cavity products around service penetrations
- attaching brackets, fixings and trim to concrete, block or masonry during retrofit work
- general site fixing where a battery drill and anchors would be slower.
Fuel cell compatibility guide
Choosing the right fuel cell depends on the tool you are running. Use the table below to match the GFS fuel cell series to your nailer.
| GFS fuel cell | Compatible gas nailers |
|---|---|
| GFS 1000 Series fuel cell | GFS1000 Concrete Nailer, Powers Trak-it C3, Ramset TrakFast |
| GFS 700 Series fuel cell | Ramset TrakMaster |






Both fuel cell series are described by the manufacturer as high-performance gas with clean combustion. If you are unsure which cell your tool takes, check the model name on the tool body or ask your Garrards branch before ordering.
GFS1000 concrete gas nailer specifications
- 40-shot magazine
- 3.5 kg weight
- 6-month warranty
- Runs on GFS 1000 Series fuel cells and GFS 19mm pins

Key benefits for pest management businesses
- Lower consumable cost – GFS pins and fuel cells are positioned as a value alternative to branded consumables for the same tools.
- No new tool required – compatible with Ramset and Powers gas nailers already common in the Australian pest and building trades.
- Complete packs – 1,000 pins and a fuel cell in one box keeps stock control simple for vehicle kits.
Safety when using gas-actuated nailers
Gas nailers are powered tools and should be treated accordingly on site. Follow the tool manufacturer’s operating instructions, wear safety glasses and hearing protection, and keep fuel cells away from heat and open flame. Fuel cells are pressurised gas cartridges, so store them in the vehicle out of direct sun and dispose of empties in line with the label and your state or territory environmental requirements.
Frequently asked questions
Will GFS fuel cells work in my Ramset or Powers gun?
Yes. The GFS 1000 Series fuel cell fits the GFS1000, Powers Trak-it C3 and Ramset TrakFast; the GFS 700 Series fuel cell fits the Ramset TrakMaster. Use the compatibility table above to confirm the correct series for your tool.
What comes in a GFS fuel cell pack?
Each pack contains 1,000 GFS 19mm pins and one fuel cell.
Does Garrards sell the nailer as well as the consumables?
Yes. The GFS1000 concrete gas nailer is available from Garrards along with GFS pins and fuel cells.
Available from Garrards
GFS fuel cells, 19mm pin packs and the GFS1000 concrete gas nailer are available through Garrards branches across Australia. Check with your branch for current pricing and stock, and ask about the right fuel cell for your tool.
Contact your local Garrards branch
Frequently asked questions
Will GFS fuel cells work in my Ramset or Powers gun?
Yes. The GFS 1000 Series fuel cell fits the GFS1000, Powers Trak-it C3 and Ramset TrakFast; the GFS 700 Series fuel cell fits the Ramset TrakMaster.
What comes in a GFS fuel cell pack?
Each pack contains 1,000 GFS 19mm pins and one fuel cell.
Does Garrards sell the nailer as well as the consumables?
Yes. The GFS1000 concrete gas nailer is available from Garrards along with GFS pins and fuel cells.
