Vector Control Equipment and Larvicides for Mosquito Programs

Garrards supplies vector control equipment and products to local government, defence, health authorities and contractors across Australia. Vector control targets disease-carrying and nuisance insects such as mosquitoes, biting midge and flies, using thermal foggers and ULV aerosol generators for adults and bacterial larvicides for the larval stages. This page outlines the iGEBA application equipment, Vectobac larvicides and adulticides that Garrards stocks and supports.

Helicopter applying mosquito larvicide over a coastal wetland
Aerial larviciding of mosquito breeding sites. Photograph courtesy of Roy Durre, Gold Coast City Council.

Vector control in Australia

Mosquitoes transmit Ross River virus, Barmah Forest virus, Murray Valley encephalitis, Japanese encephalitis and, in north Queensland, dengue. Saltmarsh and mangrove mosquitoes such as Aedes vigilax breed in enormous numbers after spring tides and summer rain, and biting midge (Culicoides) make coastal estates unliveable at times. Most Australian vector control is run by local councils and state health departments, with the Australian Defence Force, government departments and some commercial contractors also carrying out programs.

An effective program uses both life stages as targets:

  • Larval control applies larvicides such as Vectobac to breeding sites by helicopter, fixed-wing aircraft or ground equipment before adults emerge.
  • Adult control uses thermal foggers or ultra-low-volume (ULV) aerosol generators to put a fine insecticide droplet cloud through the area where adults are resting or flying.

Garrards is a member of mosquito control and local government associations and has supplied this sector for decades. All products listed here are registered with the APVMA and must be used according to their label; operators need the pest management or agricultural chemical licence that applies in their state or territory.

iGEBA thermal foggers and ULV aerosol generators

Garrards is the Australian importer and authorised repairer of the German-made iGEBA range of thermal foggers and ULV aerosol generators. These rugged machines are used by local authorities and defence forces around the world and throughout Australia. Spare parts, servicing and troubleshooting are available through Garrards branches, backed by a factory-trained iGEBA technician at our Brisbane head office. Quotations can be arranged through your usual branch contact.

Thermal foggers

iGEBA TF-35 portable thermal fogger
iGEBA TF-35 portable thermal fogger

TF-35. The most popular thermal fogger in the range, the portable TF-35 is used extensively by local authorities and defence forces and is approved by the World Health Organization. All formulation-contacting parts are stainless steel and maximum output is 42 litres per hour. Standard accessories include repair kits, diaphragms, dosage nozzles, maintenance and cleaning tools and funnels.

TF-95HD. The smaller of the two truck-mounted thermal foggers, the TF-95HD weighs only 39.5 kg yet delivers 100 litres per hour. Its fog tube is infinitely adjustable so it can be raised or lowered to suit the job, a muffler is standard, and the handlebar running around the outside of the machine makes it easy to carry. A turntable is optional. The same standard accessories are supplied as with the TF-35.

iGEBA TF-160HD Jumbo thermal fogger
iGEBA TF-160HD “Jumbo” thermal fogger

TF-160HD “Jumbo”. The largest thermal fogger, delivering up to 150 litres per hour and able to propel water-based mixtures up to 80 m inside a greenhouse. At 70 kg it is normally truck mounted, although some organisations mount it on a trailer. An optional remote control lets the operator start and stop the engine and fogging from the cab; it performs basic functions only, which avoids the faults that affect more complex control units. Formulation-contacting parts, including the fuel tank, are stainless steel and brass, with Teflon flexible parts.

ULV aerosol generators

iGEBA U-10 HD-M truck-mounted ULV aerosol generator
iGEBA U-10 HD-M

U-10 HD-M. The smallest truck-mounted ULV machine in the iGEBA range produces 10 litres per hour of water-based solution at an average droplet size of around 12 microns. It weighs 105 kg including the 5 hp drive motor, and its side-channel blower displaces 1.25 cubic metres of air per minute.

iGEBA U-15 HD-M ULV aerosol generator with twin spray heads
iGEBA U-15 HD-M

U-15 HD-M. The mid-range unit, already in service with a number of Australian councils, is ideal for mosquito adulticiding and is also capable of treating sewers for cockroaches. It produces 20 litres per hour at an average droplet size of 36.4 microns through two spray heads that rotate through 360 degrees and can be shut off individually. The blower displaces 3 cubic metres per minute.

iGEBA U-40 HD-M large ULV aerosol generator with four spray heads
iGEBA U-40 HD-M

U-40 HD-M. The giant of the ULV range and the machine of choice for large-area adulticiding by councils and government departments. It produces 60 litres per hour through four 360-degree adjustable nozzle heads at an average droplet size of 30.4 microns, with a blower displacing 6 cubic metres per minute. A 75-litre fuel tank and consumption of 4.5 litres per hour let it complete long runs away from the refuelling point.

All ULV models come standard with repair kits, diaphragms, dosage nozzles, maintenance and cleaning tools, funnels and a remote control system.

Larvicides: the Vectobac range

Vectobac products are based on the naturally occurring soil bacterium Bacillus thuringiensis. When mosquito larvae ingest the product it destroys the gut wall, causing paralysis and death, and it is target-specific so beneficial organisms that accidentally ingest it are not affected. Vectobac is applied to first to early fourth instar larvae and can be applied aerially or by ground equipment.

Vectobac 12AS liquid mosquito larvicide container
Vectobac 12AS liquid larvicide

Vectobac 12AS

The liquid formulation and a mainstay of Australian mosquito programs. Its droplet size of 2 to 10 microns is ideal for ingestion by the target larvae. Available in 2 x 10 L packs and 200 L drums.

Vectobac G

A corn-cob granule that penetrates vegetation canopy better and drifts less than the liquid, which makes it especially useful in mangroves and other situations where canopy penetration is difficult. It has a slightly longer shelf life than the liquid, and is applied by fixed-wing aircraft or ground equipment. Available in an 18 kg bag.

Vectobac WDG

The water dispersible granule has the longest storage life of the range and, unlike the liquid, does not need to be kept below 25 degrees C, so it suits depots in warm and hot climates without refrigerated storage. Applied aerially or by ground equipment. Available in 5 kg and 25 kg containers.

Adulticides

Garrards Pyrethrin Drift

A ready-to-use pyrethrin insecticide in a liquid hydrocarbon solvent, applied through misting or fogging equipment. It is registered for the control of mosquitoes, midges and flies in outdoor situations, and for cockroaches, flies, vinegar flies, mites, spiders, flour and grain moths, weevils and other stored product pests indoors.

Aqua K-Othrine (Envu)

Aqua K-Othrine is a water-based space spray concentrate containing 2% deltamethrin. Deltamethrin flushes insects from harbourages and kills on contact, and its high activity allows very low dose rates of 0.5 to 1.0 g of active ingredient per hectare against public health pests, disease vectors, nuisance flies and mosquitoes.

Diagram of Film Forming Aqueous Spray Technology droplet with protective skin
FFAST: long-chain alcohol molecules form a skin on each droplet to slow evaporation.

Its patented Film Forming Aqueous Spray Technology (FFAST) lets water be used as the diluent without the usual evaporation problem. As each droplet forms, long-chain alcohol molecules migrate to the surface and align into a protective skin, so droplets stay at an effective size for longer and the spray is as effective as oil or diesel-diluted concentrates at equivalent active rates. Using water rather than diesel reduces flammability, odour, staining, paint damage and toxicological risk, and lowers diluent cost.

Aqua K-Othrine is designed primarily for ULV application but is also suited to thermal fogging, large-scale outdoor spraying and indoor treatments. For outdoor ULV work, dilute with water and apply through a machine producing droplets with a volume median diameter of 15 to 25 microns; it may also be applied through hand-held thermal foggers for mosquito control. For indoor treatments, remove pets and foodstuffs, cover food preparation surfaces, turn off electricity and extinguish naked flames.

Operator applying Aqua K-Othrine with an iGEBA fogger in a village setting
iGEBA equipment applying Aqua K-Othrine in the field.

Safety and compliance

  • Use only APVMA-registered products, at label rates, for the situations and pests on the label.
  • Fogging and ULV operators should hold the relevant state or territory pest management or chemical user licence and follow public notification requirements set by their council or health department.
  • Wear the PPE specified on the label and safety data sheet; thermal foggers produce hot exhaust and dense fog, so keep bystanders clear.
  • Store Vectobac liquid below 25 degrees C and rotate stock; the WDG formulation is the better choice for hot depots.

Downloads

Labels and safety data sheets for all products are available from your Garrards branch.

Frequently asked questions

Thermal fogger or ULV: which should a council choose?

Thermal foggers produce a visible fog that is easy to see and direct, and suit hand-held work in parks, drains and vegetation. ULV generators use less carrier, produce no visible smoke and are the usual choice for truck-mounted wide-area adulticiding. Many programs run both.

Why use Vectobac rather than a chemical larvicide?

Vectobac acts only on larvae that ingest it, so it is target-specific and suitable for environmentally sensitive wetlands and mangroves where broad-spectrum products are not appropriate.

Does Garrards service iGEBA machines?

Yes. Garrards is the authorised iGEBA repairer, carries spare parts and has a factory-trained technician at head office to help with troubleshooting.

Available from Garrards

Garrards supplies, services and supports the full iGEBA range and stocks Vectobac larvicides, Garrards Pyrethrin Drift and Aqua K-Othrine for vector control programs across Australia. Contact your local branch or head office for quotations, technical advice and product requests.

Contact your local Garrards branch

Frequently asked questions

Thermal fogger or ULV: which should a council choose?

Thermal foggers produce a visible fog that is easy to see and direct, and suit hand-held work in parks, drains and vegetation. ULV generators use less carrier, produce no visible smoke and are the usual choice for truck-mounted wide-area adulticiding. Many programs run both.

Why use Vectobac rather than a chemical larvicide?

Vectobac acts only on larvae that ingest it, so it is target-specific and suitable for environmentally sensitive wetlands and mangroves where broad-spectrum products are not appropriate.

Does Garrards service iGEBA machines?

Yes. Garrards is the authorised iGEBA repairer, carries spare parts and has a factory-trained technician at head office to help with troubleshooting.