Beetles

STORGARD DOME HOLDER (10PK)

Code STOR/HOLDER

CategoriesBeetles

Product details

Overview

The Storgard Dome Holder is a floor-mounted holder made by Trécé. It locks a Storgard Standard Dome or Quick-Change Dome beetle trap in one spot. Each pack has 10 holders, and the traps are sold separately.

Dome traps are light, so floor cleaning, sweeping, foot traffic or air movement can push them out of place. A trap that moves or goes missing breaks the monitoring record. It is also harder to find on the next service. The holder keeps each trap where it was put, so catch counts come from the same spot on every visit.

For Pest Management Professionals running stored product insect monitoring, the holder makes Dome trap stations semi-permanent. The traps can still be opened for servicing and moved when the monitoring plan changes.

Product Highlights

  • Stays in place: Built to stop Dome traps being moved by cleaning, airflow or accidental knocks. Trécé has shown this by testing the holder with an air hose and a broom. A trap that stays put gives you reliable trend data, and you don't lose time looking for traps that have moved.
  • Fits both Dome trap types: Works with Standard Dome and Quick-Change Dome traps. One holder suits sites that use either trap or both.
  • Quick to service and move: In the current single-piece design, the bow is hinged and opens with a quick-release snap, so you can service the trap in seconds. The holder can be moved without much effort, even though it holds the trap firmly.

Target pests

The holder does not attract or catch insects. It holds Storgard Dome traps, which are used to monitor stored product beetles, including:

  • Cigarette beetle
  • Confused flour beetle
  • Red flour beetle
  • Warehouse beetle
  • Khapra beetle
  • Other stored product beetles that respond to the Ultra-Combi lure (25+ species, depending on the lure used)

Where to use

For use inside facilities and structures where Dome traps are placed on solid floors for stored product insect monitoring.

  • Solid floors in warehouses, storage areas and commercial or industrial facilities
  • Next to cracks, crevices, equipment racking, poles and building columns, which are common Dome trap placement points
  • Areas where traps are likely to be moved, such as routine floor-cleaning zones, high-airflow areas and busy walkways

Application

Put the holder where the Dome trap will sit and fix it to the floor. Place the trap in the holder and close the bow over it.

  • Mounting options: screws, double-sided tape or adhesive-backed velcro (hook-and-loop)
  • Use adhesive mounting for a station you can move later without tools. Use screws for a more permanent station.
  • To service, open the quick-release snap closure, check or replace the trap or lure tray, then snap it shut
  • Follow the instructions supplied with your Storgard Dome trap for trap set-up, lure handling and how often to service

FAQ

  • Which traps does it fit? The holder is made for Storgard Standard Dome and Quick-Change Dome traps. It is not described as suitable for other traps.
  • Are traps or lures included? No. The pack contains holders only. Storgard Dome traps, Quick-Change kits and ReBAIT lure trays are sold separately.
  • Do I have to drill into the floor? No. You can fix it with screws, double-sided tape or adhesive-backed velcro. Adhesive mounting avoids drilling, and you can still move the holder easily when your trap layout changes.

Pack Size

Pack of 10 holders.

  • How to order: use Garrards product code STOR/HOLDER