Termiticides

BIFLEX AQUA MAX 100SC 5L

Active ingredient100 g/L bifenthrin

Code BIF/MAX/5

Downloads

Product details

Formulation

Water-based suspension concentrate (SC). Group 3A insecticide (synthetic pyrethroid).

Overview

Biflex AquaMax is a water-based bifenthrin concentrate. It is both an insecticide and a termiticide, so Pest Management Professionals can use one product for general pest control and for subterranean termite management in and around domestic, commercial, public and industrial buildings.

Insects die when they are hit by the spray and also when they later walk on treated surfaces. This gives both quick knockdown and lasting residual control of spiders, papernest wasps, ants, cockroaches, fleas, flies, mosquitoes, biting midges and ticks. It is also registered to form Residual Surface Treatments on surfaces and vegetation where mosquitoes, biting midges and flies rest.

For termite work, the diluted emulsion is used to build continuous horizontal and vertical chemical soil barriers to the Australian Standard AS 3660 Series. It can be used before and after construction, through certified reticulation systems, around service poles and fence posts, and to destroy termite nests. APVMA Approval No. 60678/0109.

Product Highlights

  • One concentrate for general pest and termite work: the same 5 L pack covers crawling and flying insect control plus AS 3660 termite barriers. That means fewer products to stock in the van and fewer labels to manage.
  • Flexible termite options: pre- and post-construction barriers, under-slab injection, perimeter barriers, perimeter and cavity infill reticulation, pole and fence post protection, and nest eradication. The label publishes expected protection periods by situation, rate and region (north or south of the Tropic of Capricorn), so you can match the treatment to the job and record it on the durable notice.
  • Water-based formulation that is non-staining and odourless. This suits occupied homes and businesses where clients notice smell and marks on surfaces. It can also be applied to vegetation and harbourage areas for Residual Surface Treatments against mosquitoes, biting midges and flies.

Target pests

  • Spiders
  • Papernest wasps
  • Ants (excluding red imported fire ants)
  • Cockroaches
  • Mosquitoes
  • Biting midges
  • Fleas
  • Flies
  • Ticks (adults and nymphs)
  • Subterranean termites (all states except Tasmania)

Where to use

General pests: inside and outside, and the surrounds of, domestic, commercial, public and industrial buildings and structures, in all states.

  • Indoors: cracks and crevices, behind and under sinks, stoves, refrigerators and furniture, around pipes, cornices and skirting boards, walls, fly screens and indoor plants
  • Outdoors: building exteriors, eaves, walls, foundations, fences, garages, sheds, gazebos, verandahs, patios, window frames and under floors
  • Perimeter bands of soil or vegetation around structures, plus ornamental plants, shrubs, hedges, turf, trunks of woody ornamentals, and shady or damp areas
  • Pet housing and surrounds (for flea and tick control). Do not spray animals directly
  • Subterranean termites: domestic, public, commercial and industrial areas in all states except Tasmania. Covers under slabs and suspended floors, perimeter barriers for new and existing buildings, certified reticulation systems, service poles and fence posts, and termite nests in trees, poles, posts and stumps
  • Not approved: mud, sand, mangrove or aquatic habitats; cavity walls for termite treatment, except through certified cavity infill reticulation systems or direct nest treatment

Application

Add the concentrate to water in the spray tank, mix thoroughly and keep it agitated during mixing and application. Apply only as directed on the label.

  • General pests: coarse, low-pressure surface spray, applied without going past the point of run-off. Use a solid stream nozzle for crack and crevice work
  • Spiders: two-part treatment, crack and crevice first, then a band spray over surfaces
  • Papernest wasps: apply directly to the nest. Remove the nest once all adult wasps are knocked down
  • Perimeter treatments: treat a band of soil or vegetation around the structure and the lower foundation. When spraying vegetation, cover the whole plant and both sides of the leaves
  • Foaming agents help the product penetrate concealed areas such as wall cavities
  • Termites: install barriers to the AS 3660 Series using low-pressure, high-volume equipment that delivers coarse droplets. Methods include open wand, trenching and treating backfill, soil rodding, sub-slab injection through pre-drilled holes, and certified reticulation systems
  • Marker dye is recommended for even application of termiticide emulsion. A soil surfactant, wetting agent or foaming agent can help on hard-to-wet soils or where access is difficult
  • Sub-slab injection equipment must be leak-free and have tip shut-off. Lateral dispersion tips are recommended, and drill holes must be resealed afterwards
  • Do not use as a space spray, ULV or thermal fog
  • Do not apply to soils that are very wet or straight after heavy rain, or if rain is expected before spray on leaves has dried
  • Do not use where predatory mites are established and controlling mites effectively
  • Termite barriers have a finite life. At least an annual inspection is required, and this must be stated on the durable notice required under the BCA

Safety

Signal heading: POISON (Schedule 6). Restricted chemical product: it may only be supplied to, or used by, an authorised person. Pest Management Professionals must be licensed under state legislation.

  • Poisonous if swallowed. May irritate eyes and skin. Repeated exposure may cause allergic disorders
  • Opening the container and preparing spray: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length PVC or nitrile gloves
  • Hand-held application: protective waterproof clothing, elbow-length PVC or nitrile gloves, water-resistant footwear
  • Termite control in buildings and structures: cotton overalls buttoned to the neck and wrist, washable hat, elbow-length PVC or nitrile gloves
  • Re-entry: let treated areas dry completely (normally 3–4 hours) and ventilate buildings before people return
  • Remove pets and animals before spraying. Cover or remove food, water containers and food preparation surfaces
  • Dangerous to fish, aquatic organisms and bees. Do not spray plants in flower while bees are foraging
  • First aid: Poisons Information Centre 13 11 26

FAQ

  • Can one product really cover both general pest and termite jobs? Yes. The label covers crawling and flying insects plus subterranean termite barriers, reticulation, pole protection and nest eradication. Limitations: termite use is not registered in Tasmania, termite work must comply with the AS 3660 Series, and expected protection periods are shorter north of the Tropic of Capricorn. Red imported fire ants are excluded from the ant claim.
  • Is it suitable for occupied homes, pets and sensitive sites? It is registered for indoor crack, crevice and surface treatments in homes and commercial buildings, but must not be used as a space spray. Remove pets, cover food and utensils, and keep people out until surfaces are dry and ventilated. It is dangerous to fish and bees, and must not be applied to aquatic habitats or to soil when run-off is likely.
  • What can I mix it with, and how do I manage resistance? The label supports adding marker dye, soil surfactants, and wetting or foaming agents to improve coverage and soil penetration. It does not list other tank mixes. As a Group 3A pyrethroid, repeated use can select for resistant insects, so rotate with products from other mode-of-action groups as part of your resistance management plan.

Pack Size

5 L

  • How to order: Garrards product code BIF/MAX/5