Product details
Formulation
Ready-to-use dry foam in a pressurised aerosol can. Shake the can and use it as supplied. No mixing or dilution is needed. When dispensed, the foam expands at about 30:1, so 30 g of product makes about 1 L of foam.
Fipronil is a phenylpyrazole insecticide. Termidor Foam is not scheduled under the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP).
Overview
Termidor Foam is a BASF termiticide and insecticide for Pest Management Professionals. It treats subterranean termites, drywood termites and nuisance ants where they live: in nests, galleries, wall cavities and enclosed harbourages that liquid sprays and dusts can't easily reach. It is registered by the APVMA (Approval No. 70346/63237).
The foam expands at about 30:1 to fill termite workings and carton material, then holds in place without breaking down into liquid. The low fipronil concentration is designed so the foam doesn't kill termites too quickly. This gives the Termidor Transfer Effect time to spread the active through the colony, which makes it suited to stage 1 colony elimination in nests on and off the structure, in bivouacs and in bait stations.
Termidor Foam is a targeted treatment for active termite and ant activity. It is not a protective barrier. The label requires a continuous chemical treatment under AS 3660.2 once termite activity in the structure has been eliminated.
Product Highlights
- Dry foam that holds in place: the 30:1 expansion carries the active through intricate workings and carton material. Because the foam doesn't turn to water like some foams, it spreads the active evenly with minimal runoff or mess in wall cavities and timber.
- Built for colony impact, not just knockdown: the low 0.05 g/kg fipronil concentration is designed not to kill too quickly. Affected termites have time to carry the active back to the colony through the Termidor Transfer Effect.
- One ready-to-use can for termites and ants: there is no mixing and no spray rig. One 567 g can makes about 18 L of foam and is registered for subterranean termites, drywood termites and several common nuisance ant species.
Target pests
- Subterranean termites, including Coptotermes acinaciformis, Mastotermes darwiniensis, Nasutitermes spp. and Schedorhinotermes spp.
- Drywood termites, including Incisitermes spp.
- Argentine ant (Linepithema humile)
- Black house ant (Ochetellus glaber)
- Meat ants (Iridomyrmex purpureus)
- Coastal brown ants (Pheidole megacephala)
- Pavement ants (Tetramorium sp.)
Where to use
- Termite nests in trees, stumps, posts, power poles, mounds and wall cavities
- Active termite workings when the nest can't be found, such as workings in timber or wall cavities
- Aggregation points such as bait boxes, bait stations and bivouacs, to treat more termites
- Ant nests and enclosed ant harbourages
- Indoor treatment of known or suspected ant harbourages and voids
Application
Apply directly into the gallery, nest, harbourage or void using the can's actuator and injector tube. Follow the label's Directions for Use for application time per injection point.
- Shake well before use. Remove the outer cap, snap the actuator into place and remove the finger pad cover.
- Insert the injector tip and apply until foam flows back, within the label's time guidance.
- After each injection, hold the tip in place briefly so the product left in the tube is dispensed into the treatment area.
- Drill access holes if needed to reach known or suspected galleries, harbourages or voids. Don't drill holes too close together, or foam will come out of nearby holes. Tape over holes when not in use.
- Replace the finger pad cover after use.
- For termites, treat each time significant activity is found to get the most colony decline. After termite activity has been eliminated, apply a continuous chemical treatment under AS 3660.2 straight away, and have a licensed Pest Control Operator inspect at least once a year.
- For ants, treat wherever significant activity is found. For longer-term protection, add an outdoor application of a residual liquid such as Termidor Termiticide and Insecticide.
Safety
The label signal heading is KEEP OUT OF REACH OF CHILDREN. The product is not scheduled under the SUSMP. The label safety direction is to wash hands after use.
Under GHS, the Safety Data Sheet classifies the product with the signal word Danger. It is an extremely flammable aerosol in a pressurised container that may burst if heated. Read the Safety Data Sheet before use.
- Do not spray directly onto people, pets, exposed food, food utensils or food preparation surfaces.
- Highly toxic to aquatic life. Do not contaminate streams, rivers or waterways with the chemical or used containers.
- Dangerous to bees.
- Keep away from heat, sparks, open flames and other ignition sources.
- Store in a cool place out of the sun and out of reach of children.
- Do not burn or puncture the can, even when empty. Put empty cans in the garbage or take them to a metal recycling collection point.
- Poisons Information Centre: 13 11 26. BASF emergency advice: 1800 803 440 (24 hours).
FAQ
Can Termidor Foam replace a termite barrier or soil treatment?
No. The label states that termite foaming is not a stand-alone treatment. Stopping termite activity doesn't protect a structure from other colonies in the area. After activity is eliminated, apply a continuous chemical treatment under AS 3660.2, such as Termidor Residual Termiticide & Insecticide, and keep up at least annual inspections.
Why doesn't it kill termites on contact straight away?
The fipronil level was chosen so the foam doesn't kill too quickly. Termites live long enough to carry the active back to the colony through the Termidor Transfer Effect. To treat as many termites as possible, use aggregation containers such as bait boxes or bait stations and treat each time significant activity is found.
Will the foam turn to liquid or leak out of wall cavities?
It is a dry foam that holds in place and doesn't break down into liquid like some foams. This keeps runoff to a minimum in wall voids and timber workings. Space drill holes well apart and tape them over when not in use, so foam doesn't escape from nearby holes.
Pack Size
567 g aerosol can, which makes about 18 L of foam.
- Approximate packed dimensions: 7 × 13 × 25 cm; approximate packed weight: 0.65 kg
- How to order: product code TERMIDOR/F





