Envu Products

SUSPEND FLEXX 3L

Active ingredient25 g/L deltamethrin.

Code SUSPFLEXX3

Downloads

Product details

Formulation

Suspension concentrate (SC) made with Partix™ matrix-capsule technology. Group 3A insecticide (synthetic pyrethroid). APVMA Approval No. 81960/115868.

  • Formulation type: suspension concentrate, mixed with water for spraying
  • Particle type: matrix capsule, 15–30 µm, with the deltamethrin concentrated on the particle surface rather than sealed inside
  • Not a capsule suspension (CS) and not a micro-emulsion (ME)
  • Mode of action: Group 3A insecticide

Overview

Suspend® Flexx is a residual deltamethrin insecticide for Pest Management Professionals. It controls crawling and flying insects inside and outside domestic, commercial, industrial and public buildings. It is also registered for rural hygiene work in poultry sheds, farm buildings and the non-product areas of meatworks.

Its main difference from standard deltamethrin sprays is the formulation. Instead of locking the active inside a capsule, Suspend Flexx carries the deltamethrin on the outside of larger matrix particles. This leaves more of the active available on treated surfaces, where insects pick it up, and is designed to improve efficacy and how long the residual lasts.

The label lets you choose a rate to suit the job, from a short 2–4 week residual for routine maintenance up to 12 weeks or more where pest pressure is high or surfaces break the product down quickly. One product can cover general pest services, bed bug and flea jobs, perimeter barriers and farm fly programs.

Product Highlights

  • Partix™ particle technology: the deltamethrin sits on the surface of 15–30 µm matrix particles instead of inside a capsule. More active is available on the treated surface, designed to give better contact and a longer residual.
  • Rates that match the job: the label rate table links each rate to a residual period, from 2–4 weeks for maintenance up to at least 12 weeks under high pest pressure or on aggressive surfaces. You can treat lightly for routine services and use the higher rate for clean-outs, without changing products.
  • Approved for a wide range of sites: indoor crack-and-crevice and void work, outdoor perimeter and soil/turf bands, carpets, poultry sheds (litter beetle) and farm buildings (house and stable flies). It is HACCP-certified for use in food and beverage facilities run under a HACCP-based food safety program.

Target pests

  • Ants
  • Bed bugs
  • Bird mites
  • Carpet beetles
  • Clothes moths
  • Cockroaches
  • Fleas, including cat fleas
  • Silverfish
  • Spiders, both web-spinning and non-web-spinning
  • Ticks, including paralysis ticks
  • House flies (Musca domestica)
  • Stable flies (Stomoxys calcitrans)
  • Mosquitoes
  • Stored product insect pests
  • Litter beetle (Alphitobius diaperinus) in poultry sheds

Where to use

Approved for use by Pest Management Professionals in the following situations:

  • Inside and outside, and the surrounds of, domestic, commercial, industrial and public buildings and structures
  • Indoor harbourages: skirting boards, wall/floor junctions, corners, ceilings, cabinets, behind and under appliances, floor drains, window and door frames, vents, eaves and plumbing
  • Voids: behind veneers, piers and chimney bases, rubble foundations, block, wall and structural voids, under slabs and porches, and soil in crawl spaces
  • Building exteriors: porches, patios, doors and windows, eaves, attic vents, utility entry points, foundation cracks and drilled holes
  • Perimeter barriers on external walls, plus soil, turf or other ground cover next to the structure
  • Flower, shrub and ornamental plant beds as part of ant management programs
  • Carpets and rugs (broadcast application)
  • Poultry sheds, between batches when the litter is being fully replaced
  • Farm buildings and meatworks, in non-product areas only

Application

For surface treatment only. Read the label for rates and residual periods, which depend on the pest and the type of control needed.

  • Mixing: start with a clean sprayer. Calibrate to work out the spray volume for the area, half-fill with water, add the measured product, top up and agitate.
  • Equipment: any suitable hand or mechanical sprayer that produces a coarse spray.
  • Nozzles: use a flat fan nozzle for surfaces, and a pin-stream nozzle or crack-and-crevice extension for cracks and crevices.
  • Carpets and rugs: broadcast in overlapping bands. Spray a small, hidden patch first and let it dry to check for water staining.
  • Wet areas: spray only harbourages, cracks, crevices and wall bands that routine cleaning can't reach, keeping within the band widths on the label.
  • Do not spray beyond the point of run-off. Do not use foggers or any device that creates an aerosol.
  • Ants: spray directly into nest entrances where you can find them. Pre-wet dry or water-repellent soils.
  • Bed bugs: treat bed frames, nearby walls, cracks, crevices and skirting boards, and the mattress edges and seams only. Never treat the flat sleeping surface.
  • Web-spinning spiders: leave webs in place for a few days after spraying for the best result.
  • Flies and mosquitoes: spray the surfaces where they rest. For flies, include outside surfaces that get morning sun.

Safety

Signal heading: CAUTION. Keep out of reach of children. Read the safety directions before opening or using.

  • May irritate the eyes and skin. Repeated exposure may cause allergic disorders. May cause an allergic skin reaction.
  • Facial skin contact may cause temporary facial numbness.
  • PPE: wear protective gloves. Sensitive workers should wear protective clothing. Avoid breathing spray mist and avoid contact with eyes and skin.
  • If you must handle treated materials before they are dry, wear chemical-resistant gloves and wash them after each day's use.
  • Wash hands after use and wash contaminated clothing before wearing it again.
  • Re-entry: only once sprayed surfaces are dry.
  • Do not spray people, clothing, bed linen, pets or their bedding, livestock, or exposed food and utensils. Do not use in cots where infants sleep.
  • Dangerous to fish and other aquatic organisms. Do not contaminate wetlands or watercourses.
  • Store in the closed original container in a cool, well-ventilated area, out of prolonged direct sunlight.
  • First aid: Poisons Information Centre 13 11 26.

FAQ

  • Can I use Suspend Flexx in food premises? Yes, with care. It is HACCP-certified for food and beverage facilities run under a HACCP-based food safety program. Do not spray exposed food, food utensils or food preparation areas. Remove or cover food, dishes and preparation surfaces first, and clean up thoroughly before food handling starts again. In meatworks, use it in non-product areas only.
  • Will it damage or stain surfaces? It can go on any surface that water alone does not damage. Test a small area first, especially on carpet, delicate fabrics and ornamental plants. Too much liquid on carpet can leave water stains. Tell the owner before spraying timber that will be stained later, because it may need extra preparation, the same as after water contact.
  • The flies (or ants) came back. Did the product fail? Not necessarily. A residual surface spray only controls insects that land on treated surfaces, and insects moving in from untreated areas can make it look as if the treatment didn't work. Use Suspend Flexx as part of a full fly program that targets breeding and resting sites. For ants where you can't find the nest, baiting with a registered product is the method of choice. It is a Group 3A insecticide, so rotate modes of action to manage resistance.

Pack Size

3 L pack.

  • How to order: order online using Garrards product code SUSPFLEXX3 (SUSPEND FLEXX 3L), or call Garrards on 07 3881 1693.