Termiticides

PERIGEN DEFENCE 1L

Active ingredient500 g/L permethrin (25:75 cis:trans) + Solvent: 342 g/L hydrocarbon liquid

Code PER1

Downloads

Product details

Formulation

  • Formulation type: emulsifiable concentrate (EC). You dilute it in water or, for timber treatments, in a carrier oil or kerosene, as the label directs.
  • Insecticide group: Group 3A (synthetic pyrethroid)
  • Poisons schedule: Schedule 6 (S6)
  • Resistance management: repeated use of Group 3A products can let resistant insects take over a population. Plan rotations with your supplier.

Overview

Perigen Defence is a residual permethrin insecticide concentrate for Pest Management Professionals. One product covers general pest control, protecting fabrics and carpets from insect damage, and remedial treatment of borer- and drywood termite-affected timber in buildings.

It suits jobs where a treated surface needs to keep killing insects that land on or move across it. Examples include cockroach harbourages, spider resting sites, carpets at risk from carpet beetle and clothes moth, and absorbent timber attacked by furniture beetles or powder post beetles.

Perigen Defence is APVMA registered (product number 57184). The label also covers aircraft disinsection, repellent treatment of mosquito nets and fabrics, and lawn armyworm control in turf. This lets Pest Management Professionals carry one concentrate for a wide range of work.

Product Highlights

  • Wide range of label uses: household and industrial pests, carpets and fabrics, timber in buildings, aircraft, mosquito nets and horse rugs, and lawns. Fewer products to stock in the vehicle.
  • Remedial timber treatment: mix with non-staining light oil, deodorised kerosene or water for borers. Spray or brush it on, or drill and inject damaged timber. Drywood termites (Cryptotermes spp.) are on the label for Qld, NSW, NT and WA.
  • Textile protection: surface treatment of carpets, rugs and fabrics against carpet beetle and clothes moth. Dip treatment gives repellent protection against mosquitoes and biting flies on nylon, cotton and cotton-blend nets and fabrics, and on canvas horse rugs.

Target pests

  • Cockroaches
  • Ants
  • Fleas
  • Flies and mosquitoes
  • Web-spinning and non-web-spinning spiders
  • Silverfish
  • Carpet beetle (Anthrenus flavipes) and variegated carpet beetle (Anthrenus verbasci)
  • Webbing clothes moth (Tineola bisselliella) and case-making clothes moth (Tinea pellionella)
  • Drywood termites (Cryptotermes primus, C. brevis, C. domesticus): Qld, NSW, NT and WA only
  • Auger beetles and powder post beetles (Bostrychidae), pinhole borers (Platypodidae), furniture beetles (Anobiidae)
  • Aircraft: cockroaches, moths, beetles, mosquitoes
  • Mosquitoes and biting flies (repellent fabric and net treatment)
  • Lawn armyworm (Spodoptera mauritia): Qld and NSW only

Where to use

  • Household and industrial situations
  • Carpets, rugs and fabrics
  • Remedial treatment of timber in buildings
  • Aircraft (disinsection, mixed with water only, in line with Australian quarantine requirements)
  • Repellent treatment of fabric (not clothing) and mosquito nets: nylon, cotton and cotton blends, canvas horse rugs
  • Repellent treatment of Australian Defence Force clothing, following ADFP 705 Pesticides Manual
  • Lawns, ovals and amenity areas (lawn armyworm, Qld and NSW only)

Application

Dilute before use. Rates, mixing ratios and spray volumes are on the label and must be followed.

  • General pests: spray to the point of run-off. Porous surfaces such as brick, cement and unglazed ceramic absorb spray and need more volume.
  • Cockroaches: inspect thoroughly, then treat known and potential harbourages. A barrier application around likely sources is also suggested. Where spraying is not suitable, use a registered cockroach gel.
  • Fleas: clean and vacuum first, then spray lightly, focusing under furniture. Treat pets with a registered flea product.
  • Flies and mosquitoes: spray resting surfaces. For flies, include outside surfaces that get morning sun. For mosquitoes, include walls, awnings, fences and vegetation close to buildings.
  • Spiders and silverfish: spray spiders, webs and hiding places directly, and leave webs in place for a few days. For silverfish, spray dark areas such as under skirting boards and furniture.
  • Ants: spray directly into nest entrances. Pre-wetting sandy or porous soil helps the spray penetrate. Destroying a nest needs a thorough soaking.
  • Carpets and fabrics: surface treatment only. Apply enough to penetrate the pile and do a test patch first.
  • Timber: treat absorbent surfaces only. Sand back varnish, paint or polish first. Spray or brush on, or drill and inject damaged areas. Do not use diesel.
  • Nets and fabrics: dip for two minutes, then drain and dry flat. Do not hang nets up to drain. Spray horse rugs to run-off and let them dry.
  • Lawns: apply at the first sign of armyworm damage, with Agral 600 wetting agent as the label directs.

Safety

Signal heading: POISON. Poisons Schedule 6.

  • Harmful if swallowed. Irritates the eyes, nose, throat and skin. Do not breathe in spray mist.
  • PPE when opening the container and mixing: cotton overalls buttoned to the neck and wrist, elbow-length PVC gloves, and a face shield or goggles
  • Wash hands, arms and face after use. Wash PPE and contaminated clothing after each day's use.
  • Keep away from food, food utensils and food preparation or storage areas. Remove or cover them before treating.
  • Dangerous to fish and other aquatic organisms. Do not contaminate waterways.
  • Store in the closed original container in a cool, well-ventilated place, out of direct sunlight. Do not burn empty containers.
  • First aid: Poisons Information Centre, 13 11 26

FAQ

  • Will it stain carpets, fabrics or timber finishes? On carpets, rugs and fabrics, treat a small, inconspicuous test area first to check for staining or damage. On timber, finishes on the opposite surface must be fully cured. Test a small area to make sure the solvent won't affect the finish or floor coverings. Never use diesel as a carrier in or under living areas, because it can cause odours and staining.
  • Why are flies or mosquitoes still around after treatment? A residual surface spray only controls insects that land on treated surfaces. Insects flying in from untreated areas affect how much control the customer sees, so do not always expect complete elimination of flying insects. Set customer expectations before the job.
  • Can I use it for drywood termites or lawn armyworm in any state? No. Drywood termite treatment is limited to Qld, NSW, NT and WA, and lawn armyworm control to Qld and NSW. General pest, fabric, borer and aircraft uses are not restricted by state on the label.

Pack Size

  • 1 L
  • Approximate packed dimensions: 90 mm × 90 mm × 250 mm; approximate weight 1.2 kg
  • How to order: Garrards product code PER1