Product details
Formulation
The product is a ready-to-use insecticidal dusting powder, industrial strength. You don't need to dilute it.
- Formulation type: dusting powder, supplied as a pre-filled 400 g One-Shot pod
- Mode of action: Group 3A (permethrin) + Group 15A (triflumuron) insecticide
- Poisons schedule: Schedule 5 (S5)
- APVMA approval number: 69956/105745
Overview
The StarrDust PRO Duckbill Duster + One-Shot 400 g is a dusting kit for Pest Management Professionals. It has two parts: the Duckbill Duster head, which fits onto a powered blower, and a sealed pod pre-filled with 400 g of StarrDust PRO Insecticidal Dusting Powder. You screw the pod straight onto the head, so you never decant dust into the applicator.
It's built for treating the places liquids can't reach or shouldn't be used, such as cracks and crevices, wall cavities, roof voids, sub-floors, crawl spaces and around electrical equipment. The label covers cockroaches, silverfish, spiders, ants, bedbugs, fleas, slaters, millipedes, clothes moths and bird mites, among other pests.
The dust combines two actives. Permethrin is a pyrethroid that controls adult insects. Triflumuron is an insect growth regulator (IGR) that acts on developing stages.
Product Highlights
- Decant-free closed system: the 400 g pod screws directly onto the Duckbill head. Without decanting there's less chance of spilling dust, which means less exposure for the technician, the client and the environment, and less time cleaning up.
- Two modes of action in one dust: Group 3A permethrin and Group 15A triflumuron together target both adult insects and developing stages. Knowing both groups helps you plan resistance-management rotations.
- Fits standard blowers: the head suits blowers with a 40 mm or 50.5 mm outlet (typically Makita or Hitachi) and comes with an extension nozzle for weep holes and conduit. The duster is made in Australia from recycled high-density polyethylene (HDPE).
Target pests
- Cockroaches
- Silverfish
- Spiders
- Ants
- Fleas
- Carpet beetles
- Bedbugs
- Slaters (woodlice)
- Millipedes
- Clothes moths
- Hide beetles
- European wasp
- Feral honey bee
- Bird mites
- Subterranean termites (Coptotermes spp.) in trees and stumps in urban areas
Where to use
- Domestic, institutional and industrial premises
- Food preparation and storage areas (keep the dust away from food, utensils and food-contact surfaces)
- Living and sleeping areas
- Roof, floor and wall voids and crawl spaces
- Skin and hide preparation areas
- Large wasp nests and bee nests in wall cavities
- Roof voids of houses that have harboured nesting birds
- Trees and stumps in urban areas (subterranean termites)
Application
Apply StarrDust PRO only as the label directs. Application rates are on the label.
- Setup: attach the Duckbill head to your blower. Shake the One-Shot pod gently, then remove the cap and screw the pod onto the head. Shaking loosens the dust so it flows better.
- Use the extension nozzle for weep holes, conduit and other narrow entry points. Fit the optional stainless steel flow regulator mesh if you need it.
- Cracks, crevices and voids: blow powder into harbourages, paying particular attention to warm, dark areas around cookers, fireplaces, radiators, stoves, pipes and rubbish chutes, as well as roof voids, wall cavities, basements and behind cupboards.
- Bird mites: cover roof void areas using a powder blower, concentrating on areas where there's evidence of bird nests. Remove the nests and bird-proof the roof void to stop the problem coming back.
- Other label methods: for ants, sprinkle along runs and on and around nests; for fleas, brush into carpet pile; for bedbugs, apply to bedsteads, mattresses and other harbourages.
- Methods not covered by this kit: the label specifies a hand duster for wasp and bee nests, a manual or motorised duster for hides, and a carbon dioxide gas cylinder with a trigger gun for termite nests in trees.
- Leave the powder undisturbed for as long as possible after application.
Safety
Signal heading: CAUTION. Keep out of reach of children. Poisons Schedule 5.
- PPE when opening and using: cotton overalls buttoned to the neck and wrist, a washable hat, goggles, rubber gloves and a disposable dust mask covering the mouth and nose
- When treating wasp or bee nests, also wear protective clothing including long-sleeved overalls buttoned at the wrist and neck, gloves, a hat and a bee veil
- Irritates the eyes and skin; repeated exposure may cause allergic disorders; do not inhale the dust
- Do not apply dust directly onto people
- Before use, remove or cover all exposed food, dishes, utensils and food-contact surfaces, plus pet food and water containers, fish ponds and aquariums
- Toxic to bees and reptiles and dangerous to fish and other aquatic organisms; do not contaminate ponds, waterways or ditches
- First aid: contact a doctor or the Poisons Information Centre on 13 11 26
FAQ
- Can I use it in commercial kitchens and food storage areas? Yes, food preparation and storage areas are label-approved situations. Before treating, remove or cover all exposed food, dishes, utensils and food-contact surfaces, and keep the dust off them.
- Will the Duckbill fit my blower, and what happens when the pod runs out? The head fits blowers with a 40 mm or 50.5 mm outlet, which typically means Makita, Hitachi or similar models. It's designed for StarrDust PRO One-Shot 400 g pods, and replacement pods are made in cartons of 20.
- Can I use this kit for every pest on the label? No. It's best suited to powder-blower work such as cracks, crevices, wall cavities, roof voids and bird-mite treatments. For wasp and bee nests the label specifies a hand duster, and for termite nests in trees it specifies a carbon dioxide cylinder with a trigger gun. Because the product contains Group 3A and 15A actives, rotate it with other groups to manage resistance.
Pack Size
Each kit contains one Duckbill Duster and one pre-filled StarrDust PRO One-Shot 400 g pod.
- Kit contents: 1 x Duckbill Duster, 1 x extension nozzle, 1 x rubber sealing O-ring, 1 x StarrDust PRO One-Shot 400 g pod, 1 x optional stainless steel flow regulator mesh
- Blower fitting: 40 mm or 50.5 mm outlet
- Shipping weight: approx. 1 kg
- How to order: Garrards product code STARR/DBD





