Aerosols

SECLIRA PRESSURISED INSECTICIDE 397G

Active ingredientDinotefuran 5 g/kg + Propellant: dimethyl ether and carbon dioxide

Code SECLIRA/PI/397

Downloads

CategoriesAerosolsBASF

Product details

Formulation

  • Formulation type: AE – aerosol (pressurised, ready-to-use can)
  • Insecticide mode of action: Group 4A (neonicotinoid)
  • Not a synthetic pyrethroid
  • Poisons schedule: unscheduled, with no signal heading on the label. Dinotefuran is exempt from Schedule 5 when a product contains 1% or less, and this product contains 0.5%.

Overview

Seclira Pressurised Insecticide is a ready-to-use, non-repellent aerosol containing dinotefuran. It controls ants, cockroaches, bed bugs, flies, mosquitoes, fleas, spiders, pill bugs, house crickets and stored product pests. It can be used indoors and outdoors in domestic, industrial and public health situations.

Pest Management Professionals can use the one can for spot sprays on live insects, surface sprays and crack and crevice treatment. It works with the System III Pressurised Dispenser. It gives up to 3 months of residual control of cockroaches and ants on treated surfaces and into harbourages.

It dries clear and has no odour, and insects cannot detect it, so they are not flushed out of harbourages. This makes it a practical option for sensitive sites such as food processing facilities, hospitals, schools and commercial kitchens. It is a Group 4A product rather than a pyrethroid, so it gives Pest Management Professionals a different mode of action for resistance management and for pest populations that are resistant to pyrethroids.

Registered by the APVMA: Approval No. 83032/133528.

Product Highlights

  • Non-repellent with Genuine Transfer Effect™: insects keep contacting treated surfaces and carry the active back to other insects. This matters most for social insects such as cockroaches and ants, where you need to control the whole colony and not just the insects you can see.
  • Dries clear and odourless: it leaves no visible residue or smell and does not flush insects out. This means less disruption in restaurants, hospitals, schools and food processing facilities.
  • Not a pyrethroid (Group 4A): it controls pyrethroid-resistant pests and can be rotated with other modes of action, such as Phantom Pressurised Insecticide, as part of a resistance management program.

Target pests

  • Cockroaches
  • Ants
  • Bed bugs
  • Fleas
  • Flies (indoor and outdoor)
  • Mosquitoes
  • Spiders
  • Pill bugs (slaters)
  • House crickets
  • Stored product pests, including beetle pests and adult moths

Where to use

Indoor and outdoor use in and around domestic, commercial and public buildings, covering domestic, industrial and public health situations.

  • Homes and residential properties
  • Commercial and industrial buildings
  • Food processing facilities (keep it off food, food utensils, food packaging and food preparation surfaces)
  • Hospitals and schools
  • Stored product areas: cracks, crevices and around shelving, plus walls and surfaces where adult moths rest
  • Bed bug sites: skirting boards, carpet edges, bed heads and bed frames, bedside tables and cupboards
  • Outdoor surfaces where flies are a nuisance

Application

Apply as a spot, surface or crack and crevice treatment, as set out on the label. Check the label for the exact use pattern for each pest.

  • Equipment: use the can on its own (hold it upright while spraying) or with the System III Pressurised Dispenser. After using the System III, close the valve and drain the hose line to stop leaks.
  • Use the crack and crevice nozzle to reach cracks, crevices and other hard-to-reach harbourages.
  • Spot treatment: spray live insects directly from 20–30 cm away.
  • Surface treatment: spray onto clean surfaces free of dirt, dust, oil and grease, up to but not past the point of run-off. Results are best on non-porous surfaces.
  • Test a small hidden area of carpets and other surfaces for discolouration before treating widely.
  • Bed bugs and stored product pests: use as part of an IPM program with good hygiene. For bed bugs, follow the Code of Practice for the Control of Bed bug Infestations in Australia.
  • Do not apply as a space (aerosol) spray.
  • Do not spray moving parts of machinery, electric motors or switchgear.
  • Insects are controlled within a few days of application.

Safety

The label has no poisons schedule signal heading. Read the label and Safety Data Sheet before use.

  • Safety directions: may irritate the eyes. Avoid contact with eyes and wash hands after use.
  • Extremely flammable aerosol and pressurised container that may burst if heated. Keep away from heat, sparks, open flames and other ignition sources. Do not smoke while using it. Store below 50 °C.
  • Avoid breathing the spray. It may cause drowsiness or dizziness. Deliberately sniffing or inhaling concentrated spray can be harmful or fatal.
  • Do not spray food, food utensils, food packaging, food preparation surfaces, or pet food and water bowls.
  • Very toxic to aquatic organisms. Cover fish tanks during spraying and keep it out of watercourses.
  • Do not puncture or burn the can, even when it is empty.
  • Poisons Information Centre: 13 11 26. BASF emergency line: 1800 803 440.

FAQ

  • Can I use it in food handling areas? Yes. It is approved for use in food processing facilities and dries clear and odourless. It must not be applied to food, food utensils, food packaging or food preparation surfaces, so remove or cover these items before treatment.
  • Will it work on pyrethroid-resistant cockroaches, and how do I manage resistance? It is a Group 4A (non-pyrethroid) insecticide and controls pyrethroid-resistant pests. Repeated use of Group 4A products alone can select for resistant insects, so rotate it with other modes of action such as Phantom Pressurised Insecticide.
  • Why don't I see insects die straight away? It is non-repellent and controls insects within a few days, not instantly. That delay lets ants and cockroaches carry the active back to the colony. Use it with other non-repellent baits and keep surfaces clean for best results.

Pack Size

397 g pressurised can.

  • How to order: Garrards product code SECLIRA/PI/397